What do you guys think of FI subs?
Awesome. Haven't ever used their amps but have never heard of any major issues with them. Did you ever post pics of the finished box?
Joined: Apr 2003
Posts: 2,586
From: the OC & Silicon Valley
Doesn't matter how much deadening you got.. on an A33, it WILL rattle with enough deebeez.
I've got a video floating around of my trunklid and rear windshield ready to bust out from "just" two TC9 driven 12"s...
Up front;
Pioneer 880PRS
Kicker ZX850.4
Rainbow Powerline CS's (only have fronts)
Out back;
SS PCA2000D (still waiting for my D61500.1, been 6months)
2-Fi Q 12's (no options)
3.9 cf after port and sub displacement (largest that fit)
Slot port, tuned to 32Hz
Dedicated YellowTop in the trunk
Big 3 and all other power wire is 0gauge
240+sqft of Stinger Extreme Roadkil
I am looking for someone with a camera so I can get some good video.
Pioneer 880PRS
Kicker ZX850.4
Rainbow Powerline CS's (only have fronts)
Out back;
SS PCA2000D (still waiting for my D61500.1, been 6months)
2-Fi Q 12's (no options)
3.9 cf after port and sub displacement (largest that fit)
Slot port, tuned to 32Hz
Dedicated YellowTop in the trunk
Big 3 and all other power wire is 0gauge
240+sqft of Stinger Extreme Roadkil
I am looking for someone with a camera so I can get some good video.
Joined: Apr 2003
Posts: 2,586
From: the OC & Silicon Valley
2.5 ft^3 net? Sealed or ported? What's the driver displacement?
Generally, 2.5 ft^3 should have no problem fitting in our trunks, even if it's vented. I used to run a 3.5 ft^3 ported box. Don't have the dimensions off hand...
Your maximum width will probably be the distance between the wheel wells in the trunk right behind the rear seat....unless you plan on having some funky design.
Generally, 2.5 ft^3 should have no problem fitting in our trunks, even if it's vented. I used to run a 3.5 ft^3 ported box. Don't have the dimensions off hand...
Your maximum width will probably be the distance between the wheel wells in the trunk right behind the rear seat....unless you plan on having some funky design.
OK, Width=39", Hight=16", Depth=15". These are safe measurements and will fit. It won't drop right in though, you will have to slide one side in all the way to one side of the trunk to get the other side in.
Last edited by filtor1; Dec 11, 2007 at 11:15 PM.
2.5 ft^3 net? Sealed or ported? What's the driver displacement?
Generally, 2.5 ft^3 should have no problem fitting in our trunks, even if it's vented. I used to run a 3.5 ft^3 ported box. Don't have the dimensions off hand...
Your maximum width will probably be the distance between the wheel wells in the trunk right behind the rear seat....unless you plan on having some funky design.
Generally, 2.5 ft^3 should have no problem fitting in our trunks, even if it's vented. I used to run a 3.5 ft^3 ported box. Don't have the dimensions off hand...
Your maximum width will probably be the distance between the wheel wells in the trunk right behind the rear seat....unless you plan on having some funky design.
I have no deadening except my license plate frame and I have barely no exterior rattle.
but the box 2.3-2.5cubes net after all displacements including .16 cubes for a 12" Fi Q, and tuned to 32Hz.
and filtor1, thanks a lot for the measurement, it sounds similar to what i measured a while back, but i was uncertain
yea exactly, thats why i knew i couldnt just go and measure the inside space
but the box 2.3-2.5cubes net after all displacements including .16 cubes for a 12" Fi Q, and tuned to 32Hz.
and filtor1, thanks a lot for the measurement, it sounds similar to what i measured a while back, but i was uncertain
but the box 2.3-2.5cubes net after all displacements including .16 cubes for a 12" Fi Q, and tuned to 32Hz.
and filtor1, thanks a lot for the measurement, it sounds similar to what i measured a while back, but i was uncertain
Depth=18"
Width=39"
Height=16"
you guys think this would fit inside the trunk opening and actually fit well?
Pete, from www.hexibase.com is designing an enclosure for me. He wants to do:
Depth=18"
Width=39"
Height=16"
you guys think this would fit inside the trunk opening and actually fit well?
Depth=18"
Width=39"
Height=16"
you guys think this would fit inside the trunk opening and actually fit well?
Pete, from www.hexibase.com is designing an enclosure for me. He wants to do:
Depth=18"
Width=39"
Height=16"
you guys think this would fit inside the trunk opening and actually fit well?
Depth=18"
Width=39"
Height=16"
you guys think this would fit inside the trunk opening and actually fit well?
Pete, from www.hexibase.com is designing an enclosure for me. He wants to do:
Depth=18"
Width=39"
Height=16"
you guys think this would fit inside the trunk opening and actually fit well?
Depth=18"
Width=39"
Height=16"
you guys think this would fit inside the trunk opening and actually fit well?
you got ripped because there less then $600 shipped for 2!
Ummm no. I have seen boxes close to the hatch lower and raise spl as well as sound "better" and "worse" under the same scenario. This is driver, box, and vehicle dependent.
Thread
Thread Starter
Forum
Replies
Last Post