I love road constructions...:yeahright
#44
[QUOTE=Deckdout2]Given that Charlotte likes to grace us with road construction on every corner and every mile of the city. They also felt that I needed more challenges in life, because my own was too boring......
So they decided to put man holes in the road, and not pave around them to make them level with the road. Well commuters would run over them and bend their rims and blow the sidewalls of their tires. :thankscharlotte:
The man holes are about 1.5 - 2 inches tall, enough to ruin a nice set of 19's. Also, I guess one wasn't enough, cause they had about 11 or 12 in 1 lane in a row, spaced about 15 to 20 feet apart. Half were along the right tire, the other half along the left. They left that lane and 2 others open to traffic. Saw the first one after the car in front of me went over it, went to swerve around to miss it, but was too late. Couldn't get a police report cause the officer said a sign was up stating a Construction Zone and they get calls like this all the time. "humm, maybe we should fix some roads around here!"
At any rate, need some suggestions on where some "GOOD" rim repair shops might be. I don't mind shipping and paying to get it done right. On the other hand these run retail 255.00 per rim and 189.00 per tire, so if the price for repair exceeds the price of a new rim, then I'll just buy a new one.
Thanks for the help and listening.
Sorry to hear what happened to your rims. I would take these pictures and take some pictures of the road. Even though there were signs, the roads were unsafe and the should have been closed down till the manhole work was completed. Take them to the county clerk or a lawyer. They should have to pay for damages. Let me know what happens. Warren
So they decided to put man holes in the road, and not pave around them to make them level with the road. Well commuters would run over them and bend their rims and blow the sidewalls of their tires. :thankscharlotte:
The man holes are about 1.5 - 2 inches tall, enough to ruin a nice set of 19's. Also, I guess one wasn't enough, cause they had about 11 or 12 in 1 lane in a row, spaced about 15 to 20 feet apart. Half were along the right tire, the other half along the left. They left that lane and 2 others open to traffic. Saw the first one after the car in front of me went over it, went to swerve around to miss it, but was too late. Couldn't get a police report cause the officer said a sign was up stating a Construction Zone and they get calls like this all the time. "humm, maybe we should fix some roads around here!"
At any rate, need some suggestions on where some "GOOD" rim repair shops might be. I don't mind shipping and paying to get it done right. On the other hand these run retail 255.00 per rim and 189.00 per tire, so if the price for repair exceeds the price of a new rim, then I'll just buy a new one.
Thanks for the help and listening.
Sorry to hear what happened to your rims. I would take these pictures and take some pictures of the road. Even though there were signs, the roads were unsafe and the should have been closed down till the manhole work was completed. Take them to the county clerk or a lawyer. They should have to pay for damages. Let me know what happens. Warren
#46
Play with my balls
Thread Starter
iTrader: (151)
Join Date: Sep 2002
Location: Charlotte, NC
Posts: 6,542
Originally Posted by ramberg
Sorry to hear what happened to your rims. I would take these pictures and take some pictures of the road. Even though there were signs, the roads were unsafe and the should have been closed down till the manhole work was completed. Take them to the county clerk or a lawyer. They should have to pay for damages. Let me know what happens. Warren
#47
Play with my balls
Thread Starter
iTrader: (151)
Join Date: Sep 2002
Location: Charlotte, NC
Posts: 6,542
More goodnews!!
My luck is getting better by the day! Went to go get an alignment, and they found that I bent my steering knuckle. They're charging me 289.00 for labor, but I think I'm going to fix this on my own. I need to source a new passenger side steering knuckle and a wheel bearing. Anyone have any good suggestions please advise.
#48
Originally Posted by Deckdout2
My luck is getting better by the day! Went to go get an alignment, and they found that I bent my steering knuckle. They're charging me 289.00 for labor, but I think I'm going to fix this on my own. I need to source a new passenger side steering knuckle and a wheel bearing. Anyone have any good suggestions please advise.
#49
Senior Member
iTrader: (1)
Join Date: Nov 2000
Location: Pineville (burb of Charlotte), NC
Posts: 574
Hmmm. Three folks from Charlotte on here in ONE thread??? I have been out of the Max forum for quite a while. Sorry to hear about the darn construction damage. Glad to see atleast you got the rim fixed. All the best.
#50
Play with my balls
Thread Starter
iTrader: (151)
Join Date: Sep 2002
Location: Charlotte, NC
Posts: 6,542
Originally Posted by sloppymax
might be too late on friday but that nissan specific junk yard up by the speedway might be able to help with the knuckle. as far as the bearing goes, i would personally go with a new one. i think SR still knows some people at south blvd nissan in the parts department. i just have not heard from him since sunday when he left for the left coast.
Thanks Haydn, I'll give them a call. If I can't locate them, I'll call you. I'll get up with Williams when he gets back in town. Thanks again.
#51
Play with my balls
Thread Starter
iTrader: (151)
Join Date: Sep 2002
Location: Charlotte, NC
Posts: 6,542
Originally Posted by dvpatel99se
Hmmm. Three folks from Charlotte on here in ONE thread??? I have been out of the Max forum for quite a while. Sorry to hear about the darn construction damage. Glad to see atleast you got the rim fixed. All the best.
Thanks for your thoughts. We get together occasionally for dinner and to hangout. You should keep in touch and meet up with us all sometime. There's a few more in the area that meet up also.
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
doctorpullit
8th Generation Maxima (2016-)
60
12-12-2015 09:39 AM