airbag warning light showed up today
08-01-2001, 06:32 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 150
i was installing my turbo timer today, and as told in haynes manual, i disconnected the airbig plug from underneath the steering wheel(so they will not deploy by accident, when working with ecu)and after i was done, the air bag light started blinking (malfunction). i even restted my ecu, but no go. any suggestions?
08-01-2001, 06:35 PM
#2
Originally posted by DhaMax
i was installing my turbo timer today, and as told in haynes manual, i disconnected the airbig plug from underneath the steering wheel(so they will not deploy by accident, when working with ecu)and after i was done, the air bag light started blinking (malfunction). i even restted my ecu, but no go. any suggestions?
i was installing my turbo timer today, and as told in haynes manual, i disconnected the airbig plug from underneath the steering wheel(so they will not deploy by accident, when working with ecu)and after i was done, the air bag light started blinking (malfunction). i even restted my ecu, but no go. any suggestions?
08-01-2001, 09:16 PM
#4
Donating Maxima.org Member
Join Date: Sep 2000
Posts: 4,604
Originally posted by DhaMax
i was installing my turbo timer today, and as told in haynes manual, i disconnected the airbig plug from underneath the steering wheel(so they will not deploy by accident, when working with ecu)and after i was done, the air bag light started blinking (malfunction). i even restted my ecu, but no go. any suggestions?
i was installing my turbo timer today, and as told in haynes manual, i disconnected the airbig plug from underneath the steering wheel(so they will not deploy by accident, when working with ecu)and after i was done, the air bag light started blinking (malfunction). i even restted my ecu, but no go. any suggestions?
08-02-2001, 03:28 PM
#5
Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 150
yes everything is plugged back in, i even checked the main unit under the center console. so i even checked the air bag fuse inside the car. good as new. so i just disconnected the warning light.
any sugggestions welcome
any sugggestions welcome
08-02-2001, 05:57 PM
#7
Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 150
by having the ignition key in on position. then turn the screw clockwise wait 2 seconds and turn it back. repeat once or twice simultaneously. (written in haynes) i even disconnected the + battery terminal for about 10 mins. still the same.
08-02-2001, 06:08 PM
#8
Originally posted by DhaMax
by having the ignition key in on position. then turn the screw clockwise wait 2 seconds and turn it back. repeat once or twice simultaneously. (written in haynes) i even disconnected the + battery terminal for about 10 mins. still the same.
by having the ignition key in on position. then turn the screw clockwise wait 2 seconds and turn it back. repeat once or twice simultaneously. (written in haynes) i even disconnected the + battery terminal for about 10 mins. still the same.
Thread
Thread Starter
Forum
Replies
Last Post
kirkhilles
5th Generation Maxima (2000-2003)
2
08-08-2015 10:53 AM
yat70458
5th Generation Maxima (2000-2003)
2
08-03-2015 01:16 PM