Quaife ATB installed!
Quaife ATB installed!
First off, thanks to Eric for being the first to try this as a DIY and make it look easy. He also gave me a few minuets of his time tonight to discuss reassembly, his help and advice made it a snap.
Over all this was an easy, but tricky job, not a job for a beginer though. I spent ~$100 in parts and tools. It took a total of ~8hrs to diamantle, measure the shims and re-assemble. The FSM is required.
I should be able to install it in the next few days, HEY!!! Mike!!!! where ya at?
Over all this was an easy, but tricky job, not a job for a beginer though. I spent ~$100 in parts and tools. It took a total of ~8hrs to diamantle, measure the shims and re-assemble. The FSM is required.
I should be able to install it in the next few days, HEY!!! Mike!!!! where ya at?
Supporting Maxima.org Member
Joined: Oct 2000
Posts: 1,094
From: Columbus, OH
Re: Quaife ATB installed!
Originally posted by MardiGrasMax
First off, thanks to Eric for being the first to try this as a DIY and make it look easy. He also gave me a few minuets of his time tonight to discuss reassembly, his help and advice made it a snap.
Over all this was an easy, but tricky job, not a job for a beginer though. I spent ~$100 in parts and tools. It took a total of ~8hrs to diamantle, measure the shims and re-assemble. The FSM is required.
I should be able to install it in the next few days, HEY!!! Mike!!!! where ya at?
First off, thanks to Eric for being the first to try this as a DIY and make it look easy. He also gave me a few minuets of his time tonight to discuss reassembly, his help and advice made it a snap.
Over all this was an easy, but tricky job, not a job for a beginer though. I spent ~$100 in parts and tools. It took a total of ~8hrs to diamantle, measure the shims and re-assemble. The FSM is required.
I should be able to install it in the next few days, HEY!!! Mike!!!! where ya at?
Waiting for hogan(yo_its_ok)'s shipment to reach me! I have had this quiafe and mounts and RT cat for a month now!
AS soon as his clutch,flywheel and UDP reach me!!!!!!!!!!!
I will be good to go!!!! w00p!
PEace out!!
Mike Spohn
Mike Spohn (SPOHNY) Ohio State
Had: 95 GLE gone 10/12/00 end of lease w/122k+miles.
Now have a:
97 SE black on black,5 speed,fully loaded(leather,power,etc)
JWT Intake
Cattman SS Y-Pipe
Greddy Cat-Back SS Exhaust
Pacesetter Shift Kit
PIAA Super-White lights and XtremeWhite fogs
PIAA Super-White Clear Bumper Lens Lights
APC Blue Plasma Corner Lights(re-wired)
Diamond Cut Clear Bumper Lenses
20th AE Shift ****
Stillen Oil Cap
TINT: Llumar Platinum Plus 20% back and rear, 35% on front
Axxis Metal Master REAR brakepads
Two JL 10W6s and a HUGE PPI AMP
On the Way: RT Cat,UDP Pully,UR FW,ACT Street Disc
Quaife ATB Differential, and PR Motormounts
Looking for:
New Tails(red/clear, maybe altezzas)
FSTB,RSB,Springs, and Shocks
Re: Quaife ATB installed!
Congrats!! Wanna do mine? 
Originally posted by MardiGrasMax
First off, thanks to Eric for being the first to try this as a DIY and make it look easy. He also gave me a few minuets of his time tonight to discuss reassembly, his help and advice made it a snap.
Over all this was an easy, but tricky job, not a job for a beginer though. I spent ~$100 in parts and tools. It took a total of ~8hrs to diamantle, measure the shims and re-assemble. The FSM is required.
I should be able to install it in the next few days, HEY!!! Mike!!!! where ya at?
First off, thanks to Eric for being the first to try this as a DIY and make it look easy. He also gave me a few minuets of his time tonight to discuss reassembly, his help and advice made it a snap.
Over all this was an easy, but tricky job, not a job for a beginer though. I spent ~$100 in parts and tools. It took a total of ~8hrs to diamantle, measure the shims and re-assemble. The FSM is required.
I should be able to install it in the next few days, HEY!!! Mike!!!! where ya at?
Thread
Thread Starter
Forum
Replies
Last Post
MaxLife17
8th Generation Maxima (2016-)
43
Jun 27, 2019 01:37 PM
