2002 Infiniti I35
Gold exterior/beige interior
The exterior of the car isn't in good shape; lots of dings, dents, and fender beders. But the interior is in decent shape and I'll be willing to sell any parts.
For big parts i prefer local pick up. If you want big parts shipped outside of Houston then keep in mind shipping cost.
Intake (ebay filter, cheap intercooler pipe cut to fit) - sold
cover above clock - sold
NWP phenolic spacers - sold
NWP block plate - sold
grill - sold
rearview mirror - sold
armrest (not broken) height adjustment works - sold
rear deck with bose cover - sold
top brake light - sold
sunshade, switch, and harness - sold
headlights - sold
2002 maxima valve covers - sold
CM headers/y-pipe (cheap, crap, gets the job done)
test pipe 3"
ES torque mounts (1 installed on car, 1 in hand never installed)
tranny cooler
stock exhaust (resonator removed)
o2 sim
taillights
radio (with aux input mod)
a/c climate control
seats (driver seat has coupe tears)
manifold+elbow
throttle body
maf sensor (2001 maxima maf with AIT sensor swapped over) http://forums.maxima.org/5th-generation-maxima-2000-2003/603298-2k2-2k1-maf-swap-pictures-2.html
cam position sensors
any other sensors
door sills
pillars
window switches
door handles
door panels
side mirrors
fuel rails
injectors
coil packs
clock
airbags
ecu
dash panel
wheels
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise)
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit)
Make me a fair offer if you want any of these parts.
Gold exterior/beige interior
The exterior of the car isn't in good shape; lots of dings, dents, and fender beders. But the interior is in decent shape and I'll be willing to sell any parts.
For big parts i prefer local pick up. If you want big parts shipped outside of Houston then keep in mind shipping cost.
Intake (ebay filter, cheap intercooler pipe cut to fit) - sold
cover above clock - sold
NWP phenolic spacers - sold
NWP block plate - sold
grill - sold
rearview mirror - sold
armrest (not broken) height adjustment works - sold
rear deck with bose cover - sold
top brake light - sold
sunshade, switch, and harness - sold
headlights - sold
2002 maxima valve covers - sold
CM headers/y-pipe (cheap, crap, gets the job done)
test pipe 3"
ES torque mounts (1 installed on car, 1 in hand never installed)
tranny cooler
stock exhaust (resonator removed)
o2 sim
taillights
radio (with aux input mod)
a/c climate control
seats (driver seat has coupe tears)
manifold+elbow
throttle body
maf sensor (2001 maxima maf with AIT sensor swapped over) http://forums.maxima.org/5th-generation-maxima-2000-2003/603298-2k2-2k1-maf-swap-pictures-2.html
cam position sensors
any other sensors
door sills
pillars
window switches
door handles
door panels
side mirrors
fuel rails
injectors
coil packs
clock
airbags
ecu
dash panel
wheels
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise)
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit)
Make me a fair offer if you want any of these parts.
Quote:
only 3/4. pics uploadedOriginally Posted by MaxMike93
How do the center caps look? Any pics? Price?
Quote:
$60 shippedOriginally Posted by DinoSR20
How much for the grill?
Quote:
$500 plus shippingOriginally Posted by mayur914
how much for the headlights?
Senior Member
I am interested in doing one project, so let me know how much would be for top console cover (cover above the clock)
I am not going to be able to pay a lot for it, but for cheap price I'll take it
I am not going to be able to pay a lot for it, but for cheap price I'll take it
Senior Member
Yeah, I'd say reasonable price would be $300-$350. I brought very clean headlights with missing parts on ebay for $250 (used parts from old headlights)
Quote:
Originally Posted by Joeker82
FYI - $500 for fog'd over used headlights is insane!
Quote:
the lens needs to be cleared that's all. nothing is broken or fogged from inside. but thanks anyway. i'll keep that in mindOriginally Posted by pahanorlando
Yeah, I'd say reasonable price would be $300-$350. I brought very clean headlights with missing parts on ebay for $250 (used parts from old headlights)
Senior Member
Just wanted to let everyone know that I DID receive an item through this seller, so it's not a scam, thanks 
Senior Member
Do you have the OEM floor mats? If so what kind of shape are they in?
And is the radio with the Aux input mod still available?
And is the radio with the Aux input mod still available?
i have the oem floor mats. they are extremely dirty. ill send you some pictures tomorrow. and yes the radio is still available
Senior Member
How much for the radio shipped?
Senior Member
$125 seems kind of steep to me for a factory radio so I think I'll pass. If you want to let the mats go really cheap I'll buy those even if they are in rough shape.
CM headers/y-pipe (cheap, crap, gets the job done) - 50
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) 2k2 to 2k1 MAF swap with pictures - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) 2k2 to 2k1 MAF swap with pictures - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
Junior Member
Quote:
iirc, it does fit but might leave a slight gap.Originally Posted by Cap916City
anyone knows if the i35 grill would fit on a 01 infiniti i30t?
Newbie - Just Registered
Quote:
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) 2k2 to 2k1 MAF swap with pictures - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
..............Originally Posted by junglee Z
CM headers/y-pipe (cheap, crap, gets the job done) - 50test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) 2k2 to 2k1 MAF swap with pictures - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
Sir, Is the bose audio still avalable? My 02 maxima has the same 6cd changer bose audio but cd players has some problem. So if it is good conditon, I'd like to buy
Newbie - Just Registered
???
Quote:
Sir, Is the bose audio still avalable? My 02 maxima has the same 6cd changer bose audio but cd players has some problem. So if it is good conditon, I'd like to buy
Originally Posted by Commanche
..............Sir, Is the bose audio still avalable? My 02 maxima has the same 6cd changer bose audio but cd players has some problem. So if it is good conditon, I'd like to buy
Newbie - Just Registered
I Need The Speed Control Sensor for the Tranny do you still have it????If So How much to ship to Ga.30655
Newbie - Just Registered
Hi my name is ronald im interested in buying some body parts from you do you have anything still available