TW: 2002 Infiniti I35 Part Ou
TW: 2002 Infiniti I35 Part Ou
2002 Infiniti I35
Gold exterior/beige interior
The exterior of the car isn't in good shape; lots of dings, dents, and fender beders. But the interior is in decent shape and I'll be willing to sell any parts.
For big parts i prefer local pick up. If you want big parts shipped outside of Houston then keep in mind shipping cost.
Intake (ebay filter, cheap intercooler pipe cut to fit) - sold
cover above clock - sold
NWP phenolic spacers - sold
NWP block plate - sold
grill - sold
rearview mirror - sold
armrest (not broken) height adjustment works - sold
rear deck with bose cover - sold
top brake light - sold
sunshade, switch, and harness - sold
headlights - sold
2002 maxima valve covers - sold
CM headers/y-pipe (cheap, crap, gets the job done)
test pipe 3"
ES torque mounts (1 installed on car, 1 in hand never installed)
tranny cooler
stock exhaust (resonator removed)
o2 sim
taillights
radio (with aux input mod)
a/c climate control
seats (driver seat has coupe tears)
manifold+elbow
throttle body
maf sensor (2001 maxima maf with AIT sensor swapped over) http://forums.maxima.org/5th-generation-maxima-2000-2003/603298-2k2-2k1-maf-swap-pictures-2.html
cam position sensors
any other sensors
door sills
pillars
window switches
door handles
door panels
side mirrors
fuel rails
injectors
coil packs
clock
airbags
ecu
dash panel
wheels
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise)
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit)
Make me a fair offer if you want any of these parts.
Gold exterior/beige interior
The exterior of the car isn't in good shape; lots of dings, dents, and fender beders. But the interior is in decent shape and I'll be willing to sell any parts.
For big parts i prefer local pick up. If you want big parts shipped outside of Houston then keep in mind shipping cost.
Intake (ebay filter, cheap intercooler pipe cut to fit) - sold
cover above clock - sold
NWP phenolic spacers - sold
NWP block plate - sold
grill - sold
rearview mirror - sold
armrest (not broken) height adjustment works - sold
rear deck with bose cover - sold
top brake light - sold
sunshade, switch, and harness - sold
headlights - sold
2002 maxima valve covers - sold
CM headers/y-pipe (cheap, crap, gets the job done)
test pipe 3"
ES torque mounts (1 installed on car, 1 in hand never installed)
tranny cooler
stock exhaust (resonator removed)
o2 sim
taillights
radio (with aux input mod)
a/c climate control
seats (driver seat has coupe tears)
manifold+elbow
throttle body
maf sensor (2001 maxima maf with AIT sensor swapped over) http://forums.maxima.org/5th-generation-maxima-2000-2003/603298-2k2-2k1-maf-swap-pictures-2.html
cam position sensors
any other sensors
door sills
pillars
window switches
door handles
door panels
side mirrors
fuel rails
injectors
coil packs
clock
airbags
ecu
dash panel
wheels
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise)
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit)
Make me a fair offer if you want any of these parts.
Last edited by junglee Z; Dec 13, 2012 at 06:22 PM.
I am interested in doing one project, so let me know how much would be for top console cover (cover above the clock)
I am not going to be able to pay a lot for it, but for cheap price I'll take it
I am not going to be able to pay a lot for it, but for cheap price I'll take it
the lens needs to be cleared that's all. nothing is broken or fogged from inside. but thanks anyway. i'll keep that in mind
New prices - this is not including shipping
CM headers/y-pipe (cheap, crap, gets the job done) - 50
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) 2k2 to 2k1 MAF swap with pictures - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) 2k2 to 2k1 MAF swap with pictures - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
I need bose audio if still available
CM headers/y-pipe (cheap, crap, gets the job done) - 50
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) 2k2 to 2k1 MAF swap with pictures - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) 2k2 to 2k1 MAF swap with pictures - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
Sir, Is the bose audio still avalable? My 02 maxima has the same 6cd changer bose audio but cd players has some problem. So if it is good conditon, I'd like to buy
Thread
Thread Starter
Forum
Replies
Last Post
MAXSE5SPD
General Maxima Discussion
33
Sep 17, 2022 04:00 AM
Justin Kroll
5th Generation Maxima (2000-2003)
7
Sep 2, 2015 11:06 AM






























