Too bad shipping from Fayetteville is a B!tch

Yeah man I bet it is. That's my problem trying to find G35 wheels, I also have a set of AE wheels just taking up space. I use to be slammed on stocks lol. Looked sweet I thought!

No kidding

Go Razorbacks!

Surely your not a hog fan???

nah but two of my cousins went to the U of A, and I've driven through a few times

If I saw those rims all by themselves, I wouldn't have given them even a passing thought. And yet, here on Maverick's car they look really unique and interesting. Must be the Gray Lustre and the chrome trim all coming together. (Because it's certainly not that ridiculous thing on his rear window.)

Agree...the chrome trim on the windows appear to match the rims well, but I think that ridiculous thing on the rear window sets it all off

And DAMN YOU Maverick! Your mention of your 2 sets of 5.5gen OEMs made me ask my shipping person for a quote from Fayetteville to Seattle


Are they the 6 spoke SEs?

Uhhh I'd have to look I think they are 17" GLE ones I know one set is 17" alloys

so this weekend (Friday, actually) is gonna be install party time: Suspension, all 3 Oxygen sensors, maybe grounding kit, maybe new U bolts for the RSB. I am getting O2 codes that are coming back quicker and quicker, along with mileage that's not up to snuff anymore...so I figure with damn near 160K on her, it's time for Luna to get some new O2s. Standard Motor Products upstream and NTK downstream.

What suspension setup you going for?

I have the Tokico Illumina drop kit ILK246 sitting in my garage right now. New OEM dust boots, Moog front strut mounts

I went tard and tried an inferior front strut mount.
Paying for it now with a lot of squeaks.
I wasn't an org member when I made that decision.

Looks like your doing it right.

yeah, I hope so

Talked with DJFrestyl after I bought the kit and he reinforced what I had read by searching re: moog front strut mounts and OEM dust boots. Shouldn't need anything else.



If you haven't figured out by now, I rarely do a mod of any type without a metric fvckton of research beforehand

I just threw money at mine with what I thought was common sense.

That's why I'm

meh. Live and learn, right?

I hope to God that I can fit everything in the maxima...got all the suspension stuff, plus a bunch of other crap to haul...Luna will be full, maybe look like one of those Towncars with the blown rear struts, azz hanging down...

******* Amazon. I ordered two moog strut mounts for the front... I finally get around to opening the box to look at em and they're not the same! Same label but not same part one had the bearing one does not. One had a solid center section one does not. So thanks to my prime I have another coming but I don't know when on Friday it's gonna show hope to God it's the right one though

Attaboy.

Few teaser pix...

Is that your mechanic posing with it?


Can't wait to see the drop.

Lol that's my father in law, yep







Wheelgap like a normal car!


One issue that needs to be corrected though...the middle front strut nut on the passenger side is loose, the drivers too methinks...clunking while driving and when we pressed down on the suspension in the front we could physically feel the thing moving


Also got all new o2 sensors installed, all 3 brand new

Nice drop!!

I like it.

Have someone look at your mounts while you turn the wheel left to right fully and look for movement.

The middle nut up front wasn't torqued properly... Was still loose. Used the air gun and torqued properly, smooth as butter baby

That's the drop with springs?

Yes, the kit comes with Tokico springs as well ... Inch and a half drop

some quick shots taken on the drive home yesterday in Eastern Washington:

TOO DAMN HIGH. Reminds me of the drop I had on my older max with illuminas and eibachs.

Tons better than stock though

too damn high

For me, it's perfect

LOL but it looks 100x better with the drop now. Wait to see how low I am come friday.

The colormatched mudflaps look good to. Im considering picking up a can of KH3 and doing mine.

You'll be glad you did. got my rear roof spoiler color matched and ready for install on the next day the weather gets past 70 here in Seattle... So like August

I see the difference now, the car looks 10x better.

This must be my problem as well! My right front strut clunks a lot, and the bolt looks out of place compared to the left strut. How are you going about fixing it, just tightening it? Thinking about doing it with an impact wrench...

Buzz gun torqued to 50 ft/lbs

A 4th gen with OEM 17" SE Rims really does look better the way you have it, Amerikaner. Normally I think all this "drop your ride" nonsense is for the kiddies, but even I have to admit the 4th Gen Maxima was disproportionately silly looking in this respect.

Looking good, buddy.

Thank you sir

This is the first car I've owned that I've actually modded...and up until this car I've never even entertained the idea, tbh. I agree, the 4th gen sits so high above the tires in stock form it's silly...especially since the driver actually sits lower in this car than in many others. I like the stock wheelgap of the third gens best, actually. Someone in another thread commented on how I now have stock 3rd gen wheelgap

Still deciding between the 5.5gen SE wheels or the G35 6 spokes when it comes time to replace my tires, but I've got a ways before that time occurs. I'm just about a year and a half on my Conti ExtremeContact DWS tires now, and I've still got plenty of tread left.

joo need coilovers....

joo need a kick in the azz!




*I'm gonna have a spare coil cover soon (the one currently on my car) if you wanted me to do a colormatch theme with your BM1 / Black scheme let me know

You say thats 1.5 inch drop...got links to what you bought? After I get my valve cover and upper oil pan leaks fixed, I just may invest. Don't want to go too low due to Maine winters but the 1.5 looks good

Bought the kit, Illumina and drop springs, kit ILK246 from Ebay. Listed 750 talked him down to 550 shipped

OEM dust boots x4 from Nissanpartsasap

Moog front strut mounts x2 from Amazon

Link to what I bought: http://www.ebay.com/itm/Tokico-Illum...-/150963289184

So I'm getting a RAPID clicking sound comiong from the front suspension when I'm turning the steering wheel...It's NOT the CVs because it happens when I'm completely stopped and turning the wheel.

http://forums.maxima.org/4th-generat...ing-wheel.html
^^ according to this thread, they say the strut mount bearing is to blame...but I got new bearings with the new strut mount.

Unless they call this thing the bearing:


As you can see, it's not in the best of shape.


Could THIS ^^ be my issue? And what the hell is it called anyhow? It's the thing that goes between the strut assembly and the wheel well. (rear shown, but front is in same condition)