General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

How to tint trunk emblems?

Thread Tools
 
Search this Thread
 
Old Sep 19, 2007 | 01:42 PM
  #1  
ZachsMax's Avatar
Thread Starter
Ridin' Spinnaz
iTrader: (5)
 
Joined: Nov 2006
Posts: 476
How to tint trunk emblems?

I'm trying to figure out how to give my trunk emblem that "gunmetal" look I've seen on so many Maximas.. I was thinking about just applying a coat of Niteshades, but wasn't sure what that would do to the gloss of the emblem (I've noticed Niteshades is matte).

Does anybody have any suggestions? Thanks
Old Sep 19, 2007 | 05:19 PM
  #2  
Jess's Avatar
SHIFT_In2D
iTrader: (33)
 
Joined: May 2003
Posts: 3,992
From: Atlanta, GA
Originally Posted by ZachsMax
I'm trying to figure out how to give my trunk emblem that "gunmetal" look I've seen on so many Maximas.. I was thinking about just applying a coat of Niteshades, but wasn't sure what that would do to the gloss of the emblem (I've noticed Niteshades is matte).

Does anybody have any suggestions? Thanks
Go to a store that sells Duplicolor paint. Preferably an auto parts store since they usually carry that stuff.

Look for... Duplicolor: Metalcast (Smoke)

This paint is transparent usually used to achieve an adonized metal look.

Scuff up the chrome emblem with 1000 grit sand paper.

Lightly spray a coat or 2.

Top off with a clear coat.

Make sure it is compatible with Metalcast though. I believe Duplicolor: Car Truck, Van (Clear) will work. Unsure at the moment though.

Best of luck to ya!
Old Sep 19, 2007 | 07:37 PM
  #3  
99BlackMaxMS's Avatar
Senior Member
iTrader: (85)
 
Joined: Jan 2007
Posts: 4,508
From: Wrentham,MA/Smithfield,RI
Originally Posted by Jess
Go to a store that sells Duplicolor paint. Preferably an auto parts store since they usually carry that stuff.

Look for... Duplicolor: Metalcast (Smoke)

This paint is transparent usually used to achieve an adonized metal look.

Scuff up the chrome emblem with 1000 grit sand paper.

Lightly spray a coat or 2.

Top off with a clear coat.

Make sure it is compatible with Metalcast though. I believe Duplicolor: Car Truck, Van (Clear) will work. Unsure at the moment though.

Best of luck to ya!
Best and easiest way to do it.
Old Sep 19, 2007 | 08:21 PM
  #4  
Majestic Ken's Avatar
Senior Member
iTrader: (5)
 
Joined: Nov 2005
Posts: 2,188
From: D-Town right above H-Town
sounds good. i wanna see pix b4 i try ANYTHING else on the org lol
Old Sep 19, 2007 | 10:45 PM
  #5  
ZachsMax's Avatar
Thread Starter
Ridin' Spinnaz
iTrader: (5)
 
Joined: Nov 2006
Posts: 476
Awesome. I just debadged my car of the M_A_X_I_M_A, so I'll test it on that first to make sure I can get it down right..
Old Sep 20, 2007 | 09:39 PM
  #6  
aporozco's Avatar
Stock Airbox Supporter #3
iTrader: (5)
 
Joined: Jul 2007
Posts: 223
From: Chicago, IL
i am going to try this but im wondering if i should keep them on while i do it or not. it would be easier but i dont know how to put them back on if i take them off. any ideas?
Old Sep 20, 2007 | 09:41 PM
  #7  
AceofSpds's Avatar
wat
iTrader: (4)
 
Joined: Aug 2005
Posts: 2,480
From: Mobile, AL
Originally Posted by aporozco
i am going to try this but im wondering if i should keep them on while i do it or not. it would be easier but i dont know how to put them back on if i take them off. any ideas?
3m double sided tape
Old Sep 21, 2007 | 06:16 PM
  #8  
aporozco's Avatar
Stock Airbox Supporter #3
iTrader: (5)
 
Joined: Jul 2007
Posts: 223
From: Chicago, IL
i just bought the stuff at autozone with van truck clear coat. waiting to test on GLE emblem to see how it goes. will post b/f and after
Old Sep 21, 2007 | 10:21 PM
  #9  
aporozco's Avatar
Stock Airbox Supporter #3
iTrader: (5)
 
Joined: Jul 2007
Posts: 223
From: Chicago, IL
i tried it tonight and it went alright....i dint wait long enuf for paint to dry b/f putting on another coat.







will finish clear tonight and put on car tom to c results.
Old Sep 22, 2007 | 09:55 PM
  #10  
aporozco's Avatar
Stock Airbox Supporter #3
iTrader: (5)
 
Joined: Jul 2007
Posts: 223
From: Chicago, IL
HERE THEY ARE TINTED.

BEFORE





AFTER





jus did my windows too 20%

watta u think

Last edited by aporozco; Sep 22, 2007 at 10:02 PM.
Old Sep 23, 2007 | 01:05 AM
  #11  
zero2sixtyZ's Avatar
You embarrass me.
iTrader: (30)
 
Joined: May 2005
Posts: 5,308
From: Malden, MA
Originally Posted by Jess
Go to a store that sells Duplicolor paint. Preferably an auto parts store since they usually carry that stuff.

Look for... Duplicolor: Metalcast (Smoke)

This paint is transparent usually used to achieve an adonized metal look.

Scuff up the chrome emblem with 1000 grit sand paper.

Lightly spray a coat or 2.

Top off with a clear coat.

Make sure it is compatible with Metalcast though. I believe Duplicolor: Car Truck, Van (Clear) will work. Unsure at the moment though.

Best of luck to ya!
Damn you! Now I have to do this... nooooooooooooooo
Old Sep 23, 2007 | 06:33 AM
  #12  
Gismo-T's Avatar
B!tch We Got a Problem
iTrader: (38)
 
Joined: Mar 2006
Posts: 1,555
From: Illi-NOISE...
Originally Posted by Jess
Go to a store that sells Duplicolor paint. Preferably an auto parts store since they usually carry that stuff.

Look for... Duplicolor: Metalcast (Smoke)

This paint is transparent usually used to achieve an adonized metal look.

Scuff up the chrome emblem with 1000 grit sand paper.

Lightly spray a coat or 2.

Top off with a clear coat.

Make sure it is compatible with Metalcast though. I believe Duplicolor: Car Truck, Van (Clear) will work. Unsure at the moment though.

Best of luck to ya!
I was wondering how to give it hyper black look...know I'll have to get some Metalcast to do it.

Thanks,
-Geo
Old Sep 23, 2007 | 08:00 AM
  #13  
Bluesbrekr's Avatar
Doctorate in Detailing
iTrader: (4)
 
Joined: Aug 2002
Posts: 3,839
Cleaned, sanded w/1000 grit, cleaned again, 2 coats of Night Shades

Old Sep 23, 2007 | 12:47 PM
  #14  
Jess's Avatar
SHIFT_In2D
iTrader: (33)
 
Joined: May 2003
Posts: 3,992
From: Atlanta, GA
Spray tint works just as well if not better than what I posted. But it's harder to find and usually a bit more expensive than a $5 can of Duplicolor so I hope this helps some of you guys.

Awesome job on the emblems!
aporozco could you post daylight pics also?

Really like the VQ35 one that looks awesome!

Last edited by Jess; Sep 23, 2007 at 12:49 PM.
Old Sep 23, 2007 | 09:18 PM
  #15  
aporozco's Avatar
Stock Airbox Supporter #3
iTrader: (5)
 
Joined: Jul 2007
Posts: 223
From: Chicago, IL
Originally Posted by Jess
Spray tint works just as well if not better than what I posted. But it's harder to find and usually a bit more expensive than a $5 can of Duplicolor so I hope this helps some of you guys.

Awesome job on the emblems!
aporozco could you post daylight pics also?

Really like the VQ35 one that looks awesome!
DAYTIME:



Old Sep 23, 2007 | 11:03 PM
  #16  
ZachsMax's Avatar
Thread Starter
Ridin' Spinnaz
iTrader: (5)
 
Joined: Nov 2006
Posts: 476
Ooh so I can use Niteshades then. Awesome.
Old Sep 27, 2007 | 09:02 PM
  #17  
ezguy's Avatar
Senior Member
 
Joined: Sep 2007
Posts: 140
From: SoCaL Sunny Daygo
Originally Posted by Jess
Spray tint works just as well if not better than what I posted. But it's harder to find and usually a bit more expensive than a $5 can of Duplicolor so I hope this helps some of you guys.

Awesome job on the emblems!
aporozco could you post daylight pics also?

Really like the VQ35 one that looks awesome!
yea it is ive been looking for some all for a couple of days now haha i think im just going to buy some night shades spray from ebay.
Old Sep 27, 2007 | 09:32 PM
  #18  
aporozco's Avatar
Stock Airbox Supporter #3
iTrader: (5)
 
Joined: Jul 2007
Posts: 223
From: Chicago, IL
jus but yje metal cast from autozone. it mad easy! yo
Old Sep 27, 2007 | 09:39 PM
  #19  
SlurpeeKing's Avatar
Member
 
Joined: Aug 2005
Posts: 81
where can i get a can of nightshades?
do i have to order it online?
pep boys dont have it
Old Sep 27, 2007 | 09:54 PM
  #20  
ezguy's Avatar
Senior Member
 
Joined: Sep 2007
Posts: 140
From: SoCaL Sunny Daygo
Originally Posted by SlurpeeKing
where can i get a can of nightshades?
do i have to order it online?
pep boys dont have it
i couldn't find it either, there on ebay for like 10 bucks i think?
Old Sep 28, 2007 | 06:27 AM
  #21  
Compusmurf's Avatar
Love my '09
 
Joined: Aug 2007
Posts: 1,013
From: Tampa, FL
If you want to take the "lazy" way, courtesynissan online parts sells them like that. Not exactly cheap for a piece of plastic tho.....
Old Sep 28, 2007 | 01:26 PM
  #22  
ouzo99max's Avatar
Senior Member
iTrader: (2)
 
Joined: Sep 2006
Posts: 550
From: Massachusetts
it looks the same
Old Sep 28, 2007 | 06:40 PM
  #23  
Compusmurf's Avatar
Love my '09
 
Joined: Aug 2007
Posts: 1,013
From: Tampa, FL
yup, looks the same, costs alot more
Old Oct 8, 2007 | 05:07 PM
  #24  
MaximaPimpin's Avatar
Senior Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 291
From: Jax, FL
What color/Dupilocolor paint would ya'll recommend on a dark green with yellow flake paint job? I want to repaint my MAXIMA because the original paint is coming off and I don't like the color of it anyways. Any suggestions?

Edit: Hard to see the flakes on the picture because the color changes depending on sunlight, gold shows only when really sunny outside. Its the OEM Evergreen Metallic paint.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
5
Aug 15, 2024 12:30 AM
05RLS2
7th Generation Maxima (2009-2015)
5
Nov 7, 2016 05:52 PM
Fbana41
Maximas for Sale / Wanted
3
Aug 29, 2016 12:18 PM
D Mason
8th Generation Maxima (2016-)
1
Jun 21, 2016 04:43 AM
Redfox
New Member Introductions
1
Sep 28, 2015 10:41 AM




All times are GMT -7. The time now is 02:28 AM.