4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

sound under right wheel

Thread Tools
 
Search this Thread
 
Old Jun 30, 2014 | 10:14 PM
  #1  
LuminousX's Avatar
Thread Starter
Senior Member
 
Joined: Feb 2014
Posts: 307
sound under right wheel

For awhile now I've been having the bang sound under the passage side of my car, the LCA was replace before the sound started, I'm not really sure, I also replaced my inner and outter tie rod and It's still there, it happens when I turn the steering right, and then back left or the other way around, doesn't matter if the car if movie not, any idea what's my issue?
Old Jul 1, 2014 | 07:53 AM
  #2  
metalgod3082's Avatar
Member
 
Joined: Mar 2008
Posts: 221
From: Mesa, AZ
Check your ball joint or possibly your axle. Those can cause that
Old Jul 1, 2014 | 01:20 PM
  #3  
Patm-a32's Avatar
Member
 
Joined: Dec 2013
Posts: 291
When i had a similar issue, i did the lca myself and didnt tighten the sway bar link enough so it was clunking and making all sorts of racket. Check tightening it, check the link itself, change if needed and check the sway bar bracket bushing
Old Jul 1, 2014 | 08:28 PM
  #4  
Alaskus's Avatar
Member
 
Joined: Jul 2013
Posts: 123
From: Tampa Bay
Could be the spring binding? Search how to check the strut bearing.

how about a video?
Old Jul 4, 2014 | 07:32 AM
  #5  
CMax03's Avatar
Senior Member
iTrader: (3)
 
Joined: Oct 2007
Posts: 9,587
From: Houston, Tx
More than likely it's a worn or loose swaybar link....
Old Jul 9, 2014 | 08:20 AM
  #6  
LuminousX's Avatar
Thread Starter
Senior Member
 
Joined: Feb 2014
Posts: 307
I also believe it's the swaybar link so I ordered a pair, hope I'm right
Old Jul 14, 2014 | 05:47 AM
  #7  
LuminousX's Avatar
Thread Starter
Senior Member
 
Joined: Feb 2014
Posts: 307
well, I replace 3 parts so for, and this damn noise is still a pain in the ***, but I did nothing that it happens when the car is in drive then I put it in reverse then I would hear it, then when I go back to drive, I would hear it, do it sounds like something keeps slipping back, and forth, but I can't tell what part it is... any ideas?, Thanks

Edit: My control arms are less then a year old, I just changed the inner, and outter tie rod, and I changed the swaybar link, and the problems is still there

Last edited by LuminousX; Jul 14, 2014 at 06:00 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
londonflu
3rd Generation Maxima (1989-1994)
40
Sep 25, 2015 09:11 AM
dcam0326
General Maxima Discussion
4
Sep 8, 2015 11:02 PM
jfl330
7th Generation Maxima (2009-2015)
4
Sep 4, 2015 01:44 PM
TheMafia
5th Generation Maxima (2000-2003)
6
Sep 4, 2015 08:26 AM




All times are GMT -7. The time now is 02:32 AM.