Those with pfi kit look here..
#41
Moderator who thinks he is better than us with his I30
iTrader: (8)
Join Date: May 2002
Posts: 9,335
Think I got it!!!
Ok. So I got a T-fitting with 1/8 NTP female's all three ends
Then for the sender side of the T-fitting I will use a 1/8 NTP male to a 1/8 BSPT female. The 1/8 NPT/BSPT adapters can be found at www.splparts.com
For the block side I will use a double sided 1/8 NPT male to go into the female end of the T-fitting
Then a 1/8 NPT female to a 1/8 BSPT male adapter to go into the block
For the feed pipe I will just use a 1/8 NTP male to whatever AN fitting I have (don't know what size it is yet)
In addition. I think using the two adapters on the block side of the T-fitting will also give me enough clearance past the oil pan.
Ok. So I got a T-fitting with 1/8 NTP female's all three ends
Then for the sender side of the T-fitting I will use a 1/8 NTP male to a 1/8 BSPT female. The 1/8 NPT/BSPT adapters can be found at www.splparts.com
For the block side I will use a double sided 1/8 NPT male to go into the female end of the T-fitting
Then a 1/8 NPT female to a 1/8 BSPT male adapter to go into the block
For the feed pipe I will just use a 1/8 NTP male to whatever AN fitting I have (don't know what size it is yet)
In addition. I think using the two adapters on the block side of the T-fitting will also give me enough clearance past the oil pan.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
3
09-28-2015 07:58 AM
Pied
4th Generation Maxima (1995-1999)
0
09-26-2015 03:29 PM