96_vqmax

iTrader: (16)

You didn't answere my question Matty,so you were able to squeez the 24" Perferated Core resonator in between your test pipe and first 90' bend?I need to know so I don't order the wrong size to custom my own catback,thanx!

matty

iTrader: (54)

Yes..it Fit between the Test pipe and the 90 degree bend...

-matt

96_vqmax

iTrader: (16)

Thanx Matty.

matty

iTrader: (54)

Its like steath mode since I painted it ...the exhaust note is really nice man, like alot better than I thought. The car feels alot linear now, like the car doesnt have to struggle to go cause its breathing more. I dont think thats just in my head

-matt

matty

iTrader: (54)

Well I went back to get a new hanger installed back by the muffler cause the entire rear section was way to loose.

Ive driven about 100 miles with the exhaust now and Im getting a weird vibration sound coming from the rear section, almost like the muffler. It only started this morning. Its a vibration sound that goes right away after 2200 rpms and Its not something thats loose...

It happens really bad when its cold, and its not as bad when it warms up. It happens past the same RPM every time I past 2100-2200 RPM's.

Could the culrit be the muffler ?? its definetly not right, there is definetly something wrong. Its a Dynomax Super Turbo Muffler.

Any Ideas ??

-matt

iansw

iTrader: (7)

Weird - I got the exact same sound from my Dynomax.

It went away after about 2000 miles.

iansw

iTrader: (7)

By the way - whatk ind of tip did you end up puttingo n that Dynomax??

I have a Magnaflow Resonated tip and I'm not liking the looks of it so much now - not to mention that they welded it onto the muffler too far in and now my exhaust doesn't stick out far enough - my bumper is starting to turn brown.

So I gotta replace mine - what did you use?

matty

iTrader: (54)

Its almost like a vibrating sound...Could it be the Y-pipe not having a lined flex section ? Its alot different then "Beez in the can sound"...the sound I'm getting is almost like a buzzzing... I thought that Warpspeed was putting lined flex sections in all their Y-pipes now.

I went with the Hooker...

http://store.summitracing.com/defaul...=egnsearch.asp

I really wanted a 4" outlet with a straight cut, rolled edge but coundnt get my hands on one. The closest one I found was this..But it was too much of a wait.




The thing I really like is the exhaust shop put the muffler kind of high so you cant really see it and put the tip on a very slight angle down. So I recently painted the entire exhaust black and did the muffler so all you see is a tip...

I hope the Buzzing goes away.

ewuzh

iTrader: (20)

Which muffler did you use? The 3" center inlet / 3" center outlet one?

Do they even make any other sizes that have center inlet/outlets?

matty

iTrader: (54)

You can use the 3" Center in Center out or the Off set in Center out.

Looks like the baffles on the inside of my muffler are shot...their sending me another one and Ill have to get it installed now....UGHH...NOTHING EVER GOES RIGHT !!!!!

-matt