Ran a 14.03 in my stock 2011 Max!
#1
Ran a 14.03 in my stock 2011 Max!
Though I'd share being there is not to many 7th gen times on here. It was pretty much the perfect conditions. 55 degrees and car weight with me in it was 3520. Tried like heck to get into the 13's but she would not do it. Another thing is it feels like something kicks in and drops the power down at about 85 mph. I know it supposed to do it but I just want to know how to shut it off!
#2
Though I'd share being there is not to many 7th gen times on here. It was pretty much the perfect conditions. 55 degrees and car weight with me in it was 3520. Tried like heck to get into the 13's but she would not do it. Another thing is it feels like something kicks in and drops the power down at about 85 mph. I know it supposed to do it but I just want to know how to shut it off!
#10
I guess if you run your car up the track 15 times in a day your bound to get some decent times. All my times were pretty much from 14.0 to 14.2. Only thing I did was leave the spare tire home. Tires were stock pressure with 91 octane. Thats what the dragstrip scale said so who knows. 3520 with driver and 3370 without. Also like I said it was only 50 to 55 degrees out, which I'm sure was the biggest help!
#12
OP, do you have a date, time and actual track for that run?
Originally Posted by joesae01max
get that 60ft down and you'll see 13's. BUT that does seem a bit off for a completely stock car. Nice job none the less.
#13
Copied a couple time slips. The track was Tri State Raceway in Earlville IA on April 22.
The car hooked up pretty good. It made a short squeal but thats it. Not sure if its even another 10th to be had or not. What these cars really need is some cvt programming!
The car hooked up pretty good. It made a short squeal but thats it. Not sure if its even another 10th to be had or not. What these cars really need is some cvt programming!
#14
#15
hmmm very nice times
im still a little stunned tho ... my best trap on the old setup all motor was an 81 in the 8th too ... But i walk the new gen maxima's from the roll ...
traps are also around 100-99 ... but from a roll race at the track i put a good beating on the new maxima's
#17
I guess if you run your car up the track 15 times in a day your bound to get some decent times. All my times were pretty much from 14.0 to 14.2. Only thing I did was leave the spare tire home. Tires were stock pressure with 91 octane. Thats what the dragstrip scale said so who knows. 3520 with driver and 3370 without. Also like I said it was only 50 to 55 degrees out, which I'm sure was the biggest help!
#19
#20
hmmm very nice times
im still a little stunned tho ... my best trap on the old setup all motor was an 81 in the 8th too ... But i walk the new gen maxima's from the roll ...
traps are also around 100-99 ... but from a roll race at the track i put a good beating on the new maxima's
im still a little stunned tho ... my best trap on the old setup all motor was an 81 in the 8th too ... But i walk the new gen maxima's from the roll ...
traps are also around 100-99 ... but from a roll race at the track i put a good beating on the new maxima's
#21
I refuse to believe that 7th Gen weigh-in @ 33xx lbs as well.....I know for a fact they're weight without anyone inside is 3540 lbs, 3565 lbs (3.5 S, 3.5 SV)according to a magazine publication I was reading and this:
http://www.nissanusa.com/maxima/specifications.html
My 5.5th Gen is a 3320 lbs beast not that 7th Gen ,....the best thing with the 2009-12 is that freaking 290 hp VQ35 that's it!!! I sure SurraTT's swapped 7th gen motor into a 5.5 th gen Maxima (5.7 th Gen) will put him in the 12's even if he can't really launch in a 1/4 mile drag strip....and that's a legit setup I'm really interested in doing b4 200K miles get here!
http://www.nissanusa.com/maxima/specifications.html
My 5.5th Gen is a 3320 lbs beast not that 7th Gen ,....the best thing with the 2009-12 is that freaking 290 hp VQ35 that's it!!! I sure SurraTT's swapped 7th gen motor into a 5.5 th gen Maxima (5.7 th Gen) will put him in the 12's even if he can't really launch in a 1/4 mile drag strip....and that's a legit setup I'm really interested in doing b4 200K miles get here!
#24
Stock CVT doing 14 flat. WOW!!! Bro when your car runs these times you gotta get some videos. I have a modded up 6spd 6thgen and I had drag radials and still couldn't get there. But racing is more science than having a fast car.
I learned that from Aaron from NWP engenering. But good run
I learned that from Aaron from NWP engenering. But good run
#25
the car is rated at low 14's, plenty have ran 14.2's n 3's i dont see why his is sooo unrealistic lol... we believe 14.0's stock from the 5.5's and nealoc's unbelievable 14.2 stock 4th gen lol... this is most certainly realistic
Good runs bro.. im so glad you are not in MD as we wouldve heard how much better our tracks are lol... ive seen where the most couple locals can squeeze out was 14.2, weather definately helped... what was the tire PSI if you remember?
Good runs bro.. im so glad you are not in MD as we wouldve heard how much better our tracks are lol... ive seen where the most couple locals can squeeze out was 14.2, weather definately helped... what was the tire PSI if you remember?
#26
seems normal to me... its 300hp and the cvt (**** u cvt's you belong in eco cars n scooters!) keeps revs in the power band so naturally it should be slightly quicker than stock manual 5.5 gen. i know its porkier but the 40 horse advantage and cvt helps
#27
doubt there is 40 extra to the wheels... the 5.5's still somehow has the advantage but its definitely depending on the driver in the 5.5
#29
edit, 7th gen is 290hp 5.5 was rated at 255hp but i dunno whether that was under the older sae standards
#30
I am not familiar with the programming of the A35 CVT but I bet it could be improved with software. I would say a properly setup CVT would run all over a manual trans or conventional auto trans car. Perhaps not as fun to drive on the street but better potential on the track, and more consistent.
Good job on that run, I know a tiny number of A33Bs have claimed stock times that low but I would say that trap speed is very good. Shed some weight next time and see what you can get.
#31
My friend and I also concluded that the CVT and weight are the issues with the 7th gen. If it had a 6speed like the 6th gen it would obliterate.
This is my 4th gen. OBX V2 headers vs a stock 7th gen. It was pretty close. Times weren't in the 14's but we are also at almost 5000ft.
Last edited by infinimax96; 07-24-2012 at 01:38 AM.
#32
FWIW, those times are totally believable to me. My 07 ran 14.5s stock. My buddy's '10 ran 14.2 @ 99.8 with nothing done. He swears that his '12 Max is quicker.
I posted up a method of shifting that many have gone on to try successfully. I found that mine would lay over around 75 mph, so after trying many methods of shifting, found that at the speed my motor would seem to pull no longer (75 - 80 mph), throw it into manual mode and let the computer shift the car itself. This method worked repeatedly time after time. I don't know how well it would work on the new max but I guess it's worth a try.
I posted up a method of shifting that many have gone on to try successfully. I found that mine would lay over around 75 mph, so after trying many methods of shifting, found that at the speed my motor would seem to pull no longer (75 - 80 mph), throw it into manual mode and let the computer shift the car itself. This method worked repeatedly time after time. I don't know how well it would work on the new max but I guess it's worth a try.
Last edited by big dave; 07-31-2012 at 08:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
09-02-2021 11:03 AM
MaxLife17
8th Generation Maxima (2016-)
43
06-27-2019 01:37 PM
Justin Kroll
5th Generation Maxima (2000-2003)
7
09-02-2015 11:06 AM