3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

pulley problem????

Old Jun 18, 2001 | 12:11 AM
  #1  
dutch007
Guest
 
Posts: n/a
i've got an 89 gxe with a wierd noise coming from the pully side of the motor. It sounds as if a pully is shot, has anyone had this kind of problem??? I hope it is'nt the water pump but the sound seems to be coming from one of the pulleys closest to the firewall. Any ideas?
Old Jun 18, 2001 | 04:42 AM
  #2  
dutch007
Guest
 
Posts: n/a
anyone??
Old Jun 18, 2001 | 06:09 AM
  #3  
Richy92SE's Avatar
Junior Member
 
Joined: Aug 2000
Posts: 16
I had a similar problem with the pully tensioner in my 92 SE, its the one that tensions the belt of the A\C, the problem was that the bearing was damage or wear, so I just bought the bearing and replaced it. You will need a press in order to get the bearing out of the pulley, and in. And of course you have to get the pully out.
Old Jun 18, 2001 | 09:45 PM
  #4  
dutch007
Guest
 
Posts: n/a
Thanks for the info....I'll get it checked out, the noise is getting kind of annoying.
Old Jun 19, 2001 | 12:41 AM
  #5  
fastmax92's Avatar
Senior Member
 
Joined: Mar 2001
Posts: 337
gettin pulleys out is a pain. but replacing the bearing and the belts will hopefully clear up your annoying problem.
Old Jun 19, 2001 | 01:29 AM
  #6  
dutch007
Guest
 
Posts: n/a
thanks, i guess i'll do my timing belt while i've got the front of the motor apart. Anything different that needs to be done when doing the timing belt on an 89?
Old Jun 19, 2001 | 05:48 AM
  #7  
C-Dawg's Avatar
Supporting Maxima.org Member
 
Joined: Nov 2000
Posts: 811
From: North Florida
Originally posted by dutch007
thanks, i guess i'll do my timing belt while i've got the front of the motor apart. Anything different that needs to be done when doing the timing belt on an 89?
Change the tensioner for the timing belt, the water pump, thermostat, and the other drive belts while you are at it.
Old Jun 19, 2001 | 06:30 AM
  #8  
Matt93SE's Avatar
STFU n00b!
iTrader: (44)
 
Joined: Aug 2000
Posts: 18,087
From: Houston
as has been said, it's most likely the A/C tensioner pulley bearing. it cost me $10 at a local bearing supply place, MUCH cheaper than Nissan parts!

this was actually the first maintenance I ever had to do on my car.. just FYI..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BkGreen97
Maximas for Sale / Wanted
2
Apr 2, 2016 05:47 AM
VQ'ed
Forced Induction
8
Feb 29, 2016 08:05 AM
02PearlSE
5th Generation Maxima (2000-2003)
11
Feb 1, 2016 12:37 AM
rbarnes
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
4
Dec 31, 2015 06:29 PM
DarjeelingRose
5th Generation Maxima (2000-2003)
3
Sep 15, 2015 01:20 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 09:30 PM.