flyry110

O ring on my new injector. cost 17 cents, fixed the problem. just thought i'd share. . . . still misses at idle though gotta figure that one out. . ..

Maximajism94se

interesting...maybe i should check out that stuff, im sure my injectors need cleaning...but taking off the intake to get 2 all that stuff is such a pain and im lazy so maybe later....sharing is good

flyry110

i smelled fuel also when i would crank it. that was why we thought injectors or fuel line were the culprit. it's not fun prying the injectors out of the fuel rail. . . . .

eric93SE

iTrader: (1)

I was woundering where you bought the o-ring for 17cents. If you didnt get the right material the o-ring will fail.

NYCe MaXiMa

iTrader: (9)

I had that on my 93 SE. Although I never fixed the problem from the feedback and advice I got, i was told to look at the fuel lines.

flyry110

they're all rubber, i put some oil on it before i installed it. dude, it's just an O ring! autozone just sold whole sets for 6 bucks, home depot sold individual ones for 17 cents. .. .

eric93SE

iTrader: (1)

Wow dude, its not just an o-ring. I has to be able to withstand the gasoline (as a solvent) other wise it will dissolve it and fall apart. This is your upper o-ring? right, thats why you were able to smell gas under the hood? well, you should stick your nose under the hood more often just to make sure it has not started leaking.

Did the packed say it was meant for fuel injection? I kinda doubt it, at least not in any regular autoparts store. You would have had to go to a fuel injection - carburator store, other wise you did not get the right ones.

To say that they are all rubber means that you have no idea. There are over a dozen differnt o-rings out there and they all have particular uses.

flyry110

okie dokie mr. smarty pants. a nissan tech was with me when we bought it. . . .

disgookonfiya

hey, when u find out y ur car misses at idle, please tell me the how u fixed it. My car has the same problem.

eric93SE

iTrader: (1)

Did you buy the o-ring from nissan? and it was the part # for the injector?. I highly doubt ANY regular parts store will carry them (I've checked numerous times). yeah it might last a couple thousand miles, but when the upper seal starts leaking and your in the middle of going 100mph and flames start shooting out of your hood, you'll be saying to your self damn that nissan tech is a F!cking idiot and I should have listened to eric .

flyry110

dude, autozone and advanced both carry O ring sets for the VE. Just FYI. . . .

dude, the O ring is the same. it's rubber, you rub oil on it. i'll talk to you in 20k miles. i'll be fine. bye bye

BoyGenius84

Dude, you can't just put any old piece of rubber aka...What you bought at Home Depot... and expect it to work. Gasoline will desolve non-treated rubber like coca-cola on a rusty nail. I was formerly a Nissan Tech, so I know, Dude.

KCMax

I protect myself with rubbers when I go to work.