Starter Replacement
#1
Starter Replacement
Hi,
yesterday the starter of my Maxima QX 3.0, 96 automatic refused to work - I could only start the engine when I hit with a hammer or something similar on the starter. So I decided to replace it next week. But how ??? Has anyone of you an idea ? Or a link with instructions ? Do I need special equipment ?
I am from Germany (sorry for my bad English)- and here this car is very rare. So no one could help me.
Thank you very much
Markus
Please mail to: ich@ederermarkus.de
yesterday the starter of my Maxima QX 3.0, 96 automatic refused to work - I could only start the engine when I hit with a hammer or something similar on the starter. So I decided to replace it next week. But how ??? Has anyone of you an idea ? Or a link with instructions ? Do I need special equipment ?
I am from Germany (sorry for my bad English)- and here this car is very rare. So no one could help me.
Thank you very much
Markus
Please mail to: ich@ederermarkus.de
#2
Your english is pretty good actually, better than some people here in America. Heres the directions for removal and installation:
1) disconnect (-) battery terminal
2) remove the air duct
3) disconnect the starter wiring, noting original positions.
4) remove connector brackets.
5) remove the starter-to-engine bolts, and remove the starter from vehicle
INSTALLATION
6) hold starter in position, insert & tighten the attaching bolts. be careful not to overtorque the mounting bolts because it might crack the nose of the starter case
7) install the starter wiring in original positions
8) install the air ducts and connector brackets
9) connect (-) battery terminal
10) start the engine a few times to make sure of proper operations
Hope this helps as you can see, I was trying to type this quick
1) disconnect (-) battery terminal
2) remove the air duct
3) disconnect the starter wiring, noting original positions.
4) remove connector brackets.
5) remove the starter-to-engine bolts, and remove the starter from vehicle
INSTALLATION
6) hold starter in position, insert & tighten the attaching bolts. be careful not to overtorque the mounting bolts because it might crack the nose of the starter case
7) install the starter wiring in original positions
8) install the air ducts and connector brackets
9) connect (-) battery terminal
10) start the engine a few times to make sure of proper operations
Hope this helps as you can see, I was trying to type this quick
#3
#5
Thanx
Thanx a lot, I will try it this week.
Markus
Markus
Originally posted by PoePoe2797
Your english is pretty good actually, better than some people here in America. Heres the directions for removal and installation:
1) disconnect (-) battery terminal
2) remove the air duct
3) disconnect the starter wiring, noting original positions.
4) remove connector brackets.
5) remove the starter-to-engine bolts, and remove the starter from vehicle
INSTALLATION
6) hold starter in position, insert & tighten the attaching bolts. be careful not to overtorque the mounting bolts because it might crack the nose of the starter case
7) install the starter wiring in original positions
8) install the air ducts and connector brackets
9) connect (-) battery terminal
10) start the engine a few times to make sure of proper operations
Hope this helps as you can see, I was trying to type this quick
Your english is pretty good actually, better than some people here in America. Heres the directions for removal and installation:
1) disconnect (-) battery terminal
2) remove the air duct
3) disconnect the starter wiring, noting original positions.
4) remove connector brackets.
5) remove the starter-to-engine bolts, and remove the starter from vehicle
INSTALLATION
6) hold starter in position, insert & tighten the attaching bolts. be careful not to overtorque the mounting bolts because it might crack the nose of the starter case
7) install the starter wiring in original positions
8) install the air ducts and connector brackets
9) connect (-) battery terminal
10) start the engine a few times to make sure of proper operations
Hope this helps as you can see, I was trying to type this quick
Thread
Thread Starter
Forum
Replies
Last Post
dvcamp
6th Generation Maxima (2004-2008)
7
09-18-2015 10:17 AM
Maxima30
5th Generation Maxima (2000-2003)
2
09-07-2015 06:13 PM