How To: 4th Gen Plug and Play Interior LED Thread
#165
Just finish doing my dash......really like the results!!
Also did the vanity lights....man those damn LEDs are blinding!!
Now on to my climate controls......
Once I'm finished with the Max, moving on to the I30!
thanks for the write up!!
Also did the vanity lights....man those damn LEDs are blinding!!
Now on to my climate controls......
Once I'm finished with the Max, moving on to the I30!
thanks for the write up!!
Last edited by queenambeach; 12-20-2013 at 11:11 AM.
#166
Ok ive read this thread up and down and want to get 100% confirmation of what lights i need
All for 99
Manual climate control
Cluster gauge
Cluster warning lights
Automatic shifter
This is what im unsure of simeone please clear this up for
Im talking plug and play not interested in soldering so if theres not pnp for certai. Ones let me know
All for 99
Manual climate control
Cluster gauge
Cluster warning lights
Automatic shifter
This is what im unsure of simeone please clear this up for
Im talking plug and play not interested in soldering so if theres not pnp for certai. Ones let me know
#167
auto shifter and key ring are plug and play
cluster warnings you really don't need LED, as they shouldn't be on as much
cluster backlighting, is plug and play with the NEO5s but you WILL have hotspotting..same with manual climate control
cluster warnings you really don't need LED, as they shouldn't be on as much
cluster backlighting, is plug and play with the NEO5s but you WILL have hotspotting..same with manual climate control
#169
Hey guys,
I've done most of the LED swaps for my car that are plug and play, but now I am wanting to do my window switches. I took out my drivers side door switches and saw the (6) 3mm LEDs that I just need to solder in, but I have no Idea what the rear LEDs are. It looks like an SMD that is 3mm by 2.5 mm with 4 contact points. Does anyone know what I can replace these with?
Thanks!
(I'm trying to upload pictures here with the garage talk app, but I says I don't have permission....)
I've done most of the LED swaps for my car that are plug and play, but now I am wanting to do my window switches. I took out my drivers side door switches and saw the (6) 3mm LEDs that I just need to solder in, but I have no Idea what the rear LEDs are. It looks like an SMD that is 3mm by 2.5 mm with 4 contact points. Does anyone know what I can replace these with?
Thanks!
(I'm trying to upload pictures here with the garage talk app, but I says I don't have permission....)
Last edited by lrb6805; 09-24-2015 at 06:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Dennis Twohy
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
0
10-01-2015 06:01 PM
BobMax
4th Generation Maxima (1995-1999)
5
08-19-2015 04:39 PM
ViciousVQ30
4th Generation Classifieds (1995-1999)
0
08-05-2015 05:40 PM