guys...i was trying to install the fog light bulb on my 2k2 max...but seems like the 5thgenmaximas.com's picture is not the same from the 2k2 model and i can tell the model is 2k or 2k1.....anyone install the 2k2 foglight urself?? it was my first time of doing it...can anyone tell me how...i appreciated...thanks~

 

What Actually is different?

 

on the 5th pic....i dont have the 10mm bolt....all i have just a big black round thing....and i dont how to remove that....i am stock with the from the 5th one....need some help....pls pls....

 

Take a look behind the fog light assembly and see if there are any bolts or screws attached to the back side instead of the underside of the assembly like the picture shows. There has to be something holding that assembly in from falling out.

Dixit

 

These are installation instructions for 2k2 fogs courtesy of Courtesy
http://www.courtesyparts.com/instruc...00002_pg1.html
Seems like assembley is held in place with two bolts from the back

 

Yeah there's 2 10mm bolts after you move the splash guard out of the way. take those out and push the assembly out from the back. once the assembly comes out just unscrew the bulb from the back. page 3 of the courtesy instructions have a good illustration at the top. removing the connector is a pain @SS.

 

Yeaaaaaaaaaaaaaaaaaah baby, I knew there was something on the back of it. Call it "Maxima Intuition"