Donkeypunch

Do they salt the roads in indiana?

Cotozic

Yeah, practically dump it in piles here in Indianapolis.

maxiiiboy

Well, I replaced my Rear/B1 Oxygen sensor today. Took me a bit longer than I expected, 3 or 3.5 hrs. I thought that removing the old one will be the hard part, but it turned out that installing the new one took most of my time. I may do a write up one day, when my tired back feels better ..... .

WTF?

Finally got my steering wheel controls working correctly on my new head unit. Had to manually program a couple buttons that weren't functioning right.


On another not. My Kenwood DNX691HD puts out 5V preouts. It's not enough.....clear as a bell, and sounds phenomenal with an ALL STOCK bose system and a new headunit, just not loud enough for my liking. Gonna change it up.

King_Ten_Ahead

iTrader: (2)

Very much so, too much if you ask me.
The roads that were repaved last year look like minefields, riddled with cracks and potholes.

Donkeypunch

You guys should buy cars from the southwest. zero rust, and we need less cars here too.


I had three extra amsoil qts so I flushed the power steering.
There were these little black flakes floating in there. I think it's from the black plastic splash guard that's in the tank.

A new one should be bought but maybe next time. I also used a magnafine filter to catch all this black crap. I can post pics if you're curious.

Blake2000

Got my Fellpro gasket kit yesterday putting it in tomorrow.......

Blake2000

Installed a Avital 3100 series 1- way alarm system......

Blake2000

Got a new JVC aftermarket radio installed with my alarm......

AT978

Catback!!! taking over the school shop with our nissans during the short half hour lunch.. we did some work!!

01bluemax

I got a new tranny installed. the cost was $3080 out the door by my local Nissan dealer. It came with a 1 yr. 12,000 mi. warranty.

AT978

Man... I wouldn't be able to shell that kind of money out for my max

NmexMAX

iTrader: (22)

Attempted to drive her to work, but then got a blinking SES and missing, intermittently. Now to go check codes after work & see WTMF.

Jstew865

Checked all fluids this morning and air pressure. On road STL for funeral. A couple pics from stop for food. Planning on looking into a den popper on Friday when I get back for the dent on back passenger side and a lil hail damage on hood. Only owned her for 5 days and have big plans. Gotta get her looking better though first!

Jprocs24

Had a friend put in my spark plugs/ teach me how. New NGK Plats! Hopefully things get better fuel-economy-wise.

Itz Shak

Nice max man! Like most of us here, you'll fall in love with your max

Jstew865

Thanx. Yeah I have enjoyed driving it so far and love the power it has! I plan on taking a plunger to the dent tomorrow and if that don't work I'm gunna by a dent popper! A few years ago I was apart of a club for 1st gen Tiburons and we used to meet up every week and just bs or go to car shows and etc.! I'd love to see if there's one for Maximas near me and if not I'd like to start one! It's nice to meet and hang with like minded car owners.

george__

iTrader: (1)

Woww

Unclejunebug

A brand new tranny only comes with a 1yr/12,000 mile warranty???

max ride 41

iTrader: (4)

i bought a whole car for 2,820.00 out the door

cornholio

iTrader: (1)

weren't you just recently deciding whether to keep your 4th gen or a hyundai? so you bought a 5th instead?

cornholio

iTrader: (1)

was going to do an oil change, got it on stands and noticed a fair amount of oil underneath

decided not to do the oil change and cleaned up what i could so i can look again tomorrow. added about 1/2 qt to bring up the level slightly.

right now it looks like front and rear valve covers and possibily the oil pan itself. i knew there was a minor problem with the front vc before but it seems to have gotten worse. i guess it's time to start planning and dive in deeper next weekend.

Jprocs24

I had a tired patched, somehow a screw found it's way in there... Bad luck!

tosheto

iTrader: (5)

Cleaned and polished the headlights.

george__

iTrader: (1)

@Jstew865 - you won't be able to do pry that free

Will have to repaint entire area

Donkeypunch

congrats!
I did it all not too long ago.
You could smell the burning oil I had to
run the vent door closed all the time it stunk so bad.

front main seal, valve covers, upper oil pan.
Pretty much all sealed up, but I think the tranny steal is slightly leaking so I need to take that out,
might as well do the rear main seal as well.
Get a dewalt it'll make the job go 10000x faster.

Blake2000

Installed my yellow fog lights ������

Unclejunebug

I had been contemplating doing some paint work myself but decided it wasn't worth it. Instead I dropped my Max off at a body shop to fix some damage to the hood and some hit and run damage to my front driver's side fender, as well as repainting the bumper, fender, and hood. She should be looking good in a few days.

george__

iTrader: (1)

Why waste hard earned money on a average joe 12+ year old car?

Unclejunebug

Says the guy who was going to pay someone to basically swap a car into another chassis .

I have about 113k on the odo and I plan to drive this car for another 100k at least so I'd like for it to look good while I do it. Plus, I got a really great quote for the work so the cost is not that bad ($700).

tilDeath

Technically last night,

But I got my left side markers working. And finally installed the wiring to my Fog lights.

WTF?

Went to ACE electrical and bought all the supplies to make an O2sim....took about twenty minutes to solder it up, on the oscilloscope it seems to be working just fine.

tnj9

Last week went to the dealer to have the airbag recall repair done. Took about an hour and a half and they threw in a multi-point inspection and gave me the results which was a nice bonus. I know it's free anyway but they were able to do that and the airbag thing in fair time and had a nice lounge to wait in. Strongly encourage anyone that hasn't done so to get this fixed. Really painless, just call and make an appt.

Cotozic

I had the same process of rationalizing things when i took mine. It mostly came down to doing what makes you happy. 700 is also a really good price. I hope it turns out well.

Donkeypunch

Changed the oil. That drain bolt was finger tight. wat?
Rotated tires.

ateick

iTrader: (1)

Sounds like money well spent for the amount of work you are having done. You win two ways - you're happy that everything is fixed and you up the resale value if you ever decide to part ways.

I had the same discussion with myself but took it a bit further

KyleWI

I went ahead and did the front brake pads today.

It appears the last person who did them didn't replace one of the pads as there was too much grip on the others for it to have had accelerated wear because of the rot.

Night and day difference in braking now though.

--

Topped off the coolant reservoir as well.

Cotozic

Feeling pretty lucky. Got an OEM double din and vent piece for the console on ebay for 40 bucks shipped. No scratches or blemishes, and all clips are still intact. No more ugly aftermarket dash sag.

Unclejunebug

^ Looking good!

Yeah, any more than that and it would have been a more difficult decision. I had been shopping around for lower mileage Maxima's but in the end I think I'll spend less money repainting and maintaining my current Max than buying a different one.

I would have liked to take it further as well (color change) but that would have been way too steep. Did you ever post after pics?

ateick

iTrader: (1)

Coming soon...