To the Headlight bakers
#48
ok, I've completed the baking and reinstalled the lights, with 2 extra screws...lol My problem now is the passenger side beam is really low.. I know i read something about adjusting the beam but i never moved it in the first place, I think i may have bent the brackets holding the bottom lense in place, so I'll be taking it back apart this weekend...
I'll put up some pics tomorrow during the daytime
I'll put up some pics tomorrow during the daytime
#49
Oh yeah, thanks guys for all your help especially 90max.. It took Waaaaaay longer then I thought it would and thats because i could get the pin that holds teh bulb in place for the turn single to stay put. I also noticed that there are alot of scratchs on the lense, can i order a new lense cover?
#51
Ok here are some pics of my headlights.. The pass side light is all marked up, I tried to use some maguire plastix cleaner but it still looks bad.
![](http://s3.photobucket.com/albums/y68/lordbless/car%20pics/?action=view¤t=headlights1.jpg)
![](http://i3.photobucket.com/albums/y68/lordbless/car%20pics/fullfront.jpg)
![](http://i3.photobucket.com/albums/y68/lordbless/car%20pics/headlights5.jpg)
An unorganized organized mess...lol
![](http://i3.photobucket.com/albums/y68/lordbless/car%20pics/frontlightpassside.jpg)
The pass side is alot of abrasions on it.. still trying to get the marks off
![](http://s3.photobucket.com/albums/y68/lordbless/car%20pics/?action=view¤t=headlights1.jpg)
![](http://i3.photobucket.com/albums/y68/lordbless/car%20pics/fullfront.jpg)
![](http://i3.photobucket.com/albums/y68/lordbless/car%20pics/headlights5.jpg)
An unorganized organized mess...lol
![](http://i3.photobucket.com/albums/y68/lordbless/car%20pics/frontlightpassside.jpg)
The pass side is alot of abrasions on it.. still trying to get the marks off
![](http://s3.photobucket.com/albums/y68/lordbless/car%20pics/?action=view¤t=headlights1.jpg)
#54
Hopefully you can tell they're blue in person.
Whats the deal with the shutter on the drivers side or is it something in the pics?
Post some outside pics when you get it back together.
You might look into a wet sand process for cleanup.
BTW, im still too big of a wuss to attempt this... I think.
Whats the deal with the shutter on the drivers side or is it something in the pics?
Post some outside pics when you get it back together.
You might look into a wet sand process for cleanup.
BTW, im still too big of a wuss to attempt this... I think.
#56
thats somethine in the pic... the only thing it looks like a very dark shade of blue, but its not shiny like my paint.
yeah it was pretty easy, just don't be like me and have left over screws...lol i'll take it back apart next weekend after I figure out which angel eye kit to order. Maxj04 what kind of rings do you have?
yeah it was pretty easy, just don't be like me and have left over screws...lol i'll take it back apart next weekend after I figure out which angel eye kit to order. Maxj04 what kind of rings do you have?
#57
I also noticed that there are beads of dried up water vapors on the lense itself, when i take them back apart i'll go in and clean the lenses. I have to take them back apart cause the passenger side aim is waaay off, its pointing down, i think i may have bent the housing causing i didn't touch the aim adjuster at all.
#58
![](http://i78.photobucket.com/albums/j116/zionxlion/IMG_3848.jpg)
Last edited by BlackSpeed; 10-29-2008 at 04:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
doctorpullit
8th Generation Maxima (2016-)
21
10-28-2019 10:58 PM
trsandrew
7th Generation Maxima (2009-2015)
17
04-08-2016 06:45 PM
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
11-01-2015 01:34 PM
trsandrew
Group Deals / Sponsors Forum
2
10-25-2015 02:47 PM