Hey, Im on my third pair of HID's.. For some reason the passenger side one blew twice. Now with this pair I noticed as I turned the car on in front of a store front, that the passenger side light takes longer to fully light up than the other. Could that have something to do with that side blowing?

 

Are you running a relay harness?

 

I dont know what that is. I didnt do the install, but from what i understand its just plug n play

 

I doubt you're using one then. Get one:
http://www.theretrofitsource.com/pro...roducts_id=166

 

These are for my fog lights by the way. Is that the same thing?

 

Yup! That will work for your fogs.

 

Excellent!... Do I need to remove the bumper again? I assume I do?

 

Yup. It adds on to your current set up pretty much.

 

Anyone know where there is that write up on getting to the fogs without removing bumber? I promised my self I would never remove that again, Pain int he *** to get it lined up and a shop charges me $100 for labor.

 

You can either take the wheels off and go through the wheel well lining or lift the car up in the front and remove the front shields below the car. There both pretty easy.

 

Ok I got that harness... Quick question, once I connect it there should be an extra wire left over hanging right? What do I do with it? Or am I looking at the diagram wrong and every plug will be plugged somewhere?

I'm thinking of the passenger side, since only one wire goes that way. Where does that plug into?

 

That plugs into the ballast on the passenger side if it's the connector that I'm thinking of.

 

But what happens with the plug that was originally there?

 

Nothing. Grab a zip lock bag and tape it up.

 

There we go... Thanks man, I figured there would be one left over. Im assuming its the one that comes from the bulb?