Aackshun's VQ35DE Swap Plans...
04-26-2012, 06:47 PM
#601
Member
Join Date: Jan 2010
Posts: 119
wait.....now that i remember, VK45 pistons are the ones that fit a VQ30,....a destroked VQ35 would need HR pistons (great for high revs,good flowing heads,and the HR pistons will raise the 8.8 C.R.)
what formula is used to determine C.R. on the VQ hybrids????
what formula is used to determine C.R. on the VQ hybrids????
04-30-2012, 09:42 AM
#604
04-30-2012, 10:39 AM
#605
It's always needed it ever since the hood incident, you've seen pictures of it.
Also need:
Sunroof
Engine Mounts
Brake Pads and Rotors
18" Tires
Headlights
Corner Lights
AC Compressor
Radio
And mooore
And whatever other things I pillaged the red car for to fix the white car
Also need:
Sunroof
Engine Mounts
Brake Pads and Rotors
18" Tires
Headlights
Corner Lights
AC Compressor
Radio
And mooore
And whatever other things I pillaged the red car for to fix the white car
Last edited by aackshun; 04-30-2012 at 12:22 PM.
05-17-2012, 07:10 AM
#611
Really? D@mn dude.
16 pages of nothing but cheap talk, endless claims and pipe dreams.
So now this will be what the 5th setup? Whats your new consideration for the platform going to be and expected power output?
Still not considering just doing the 3.5 swap?
Do you think its going to be running by Maxus?
16 pages of nothing but cheap talk, endless claims and pipe dreams.
So now this will be what the 5th setup? Whats your new consideration for the platform going to be and expected power output?
Still not considering just doing the 3.5 swap?
Do you think its going to be running by Maxus?
Last edited by Flava_24/7; 05-17-2012 at 07:13 AM.
05-17-2012, 09:20 AM
#612
Really? D@mn dude.
16 pages of nothing but cheap talk, endless claims and pipe dreams.
So now this will be what the 5th setup? Whats your new consideration for the platform going to be and expected power output?
Still not considering just doing the 3.5 swap?
Do you think its going to be running by Maxus?
16 pages of nothing but cheap talk, endless claims and pipe dreams.
So now this will be what the 5th setup? Whats your new consideration for the platform going to be and expected power output?
Still not considering just doing the 3.5 swap?
Do you think its going to be running by Maxus?
05-17-2012, 09:46 AM
#614
http://forums.maxima.org/supercharge...ml#post8477742
05-18-2012, 07:22 AM
#617
Really? D@mn dude.
16 pages of nothing but cheap talk, endless claims and pipe dreams.
-Failure to be exact.
So now this will be what the 5th setup?
-Lost count.
Whats your new consideration for the platform going to be and expected power output?
-Don't care I just want the car running
Still not considering just doing the 3.5 swap?
-There's an 06 3.5 w/ 38k miles sitting next to my car, as for how the hell it's going in there, no idea.
Do you think its going to be running by Maxus?
-Running? Yes, driveable, unlikely. I need to have this motor running by then before the warranty is up to see if it's another bad 3.5 or not.
16 pages of nothing but cheap talk, endless claims and pipe dreams.
-Failure to be exact.
So now this will be what the 5th setup?
-Lost count.
Whats your new consideration for the platform going to be and expected power output?
-Don't care I just want the car running
Still not considering just doing the 3.5 swap?
-There's an 06 3.5 w/ 38k miles sitting next to my car, as for how the hell it's going in there, no idea.
Do you think its going to be running by Maxus?
-Running? Yes, driveable, unlikely. I need to have this motor running by then before the warranty is up to see if it's another bad 3.5 or not.
I know that I'm not fooling w/ 3.0 timing anymore just because of my luck w/ motors, I can yank this one out if it's bad over night and pop another one in another night NBD, it's what I wanted to do from the start of this thread, but I was under a time crunch to get it running for IFO, now that that's all past and not happening, I can take my time and do the full swap which is what I originally wanted to do from the get-go, but couldn't because of time constraints.
Need to start ripping apart the red car even more, having the wire harness checked out sometime this week before I buy it and start attempting a full 3.5 swap....
Last edited by aackshun; 05-18-2012 at 07:38 AM.
06-14-2012, 05:13 PM
#623
Hey bro are you ordering direct from nissan or are you junking for the harness? I tried junking for a harness but it was a huge pain and waste of time. Idk if you have a good relationship with ur local nissan dealer but you might see about havin them order it for you... it worked for me.
06-15-2012, 02:27 PM
#625
No offense bro, but I will believe it when I see it....... Installed and running.Youve already said your doing so many different setups and still nothing.
Less talk, more aackshun.
Do work son!
06-15-2012, 02:32 PM
#626
I can vouch for this guy's salvage yard. I've ordered multiple parts from them and they are as close to new as you can get without actually being new from nissan. I wouldn't even call it a "salvage" yard. More like a slightly used yard. lol
06-15-2012, 03:03 PM
#627
Just learned.... Can't use that cluster.... At least they're cheap... I can order one....
I got a steal on the Osiris.... Need to wait another week to be able to swing it.
Nope. Just some extra wires. Think of auto to manual swapped cars. (mine) Just extra wires going to the TCM and tranny.
I can vouch for this guy's salvage yard. I've ordered multiple parts from them and they are as close to new as you can get without actually being new from nissan. I wouldn't even call it a "salvage" yard. More like a slightly used yard. lol
I can vouch for this guy's salvage yard. I've ordered multiple parts from them and they are as close to new as you can get without actually being new from nissan. I wouldn't even call it a "salvage" yard. More like a slightly used yard. lol
My motor came w/ an 06 harness sooooo yeahhhhhhh...... swap city trick...
Last edited by aackshun; 06-15-2012 at 03:12 PM.
06-16-2012, 08:35 AM
#628
Ok cool man, so you are like scrooge mcduck but instead of swimming in a vat o gold coins your swimming in nissan parts, pure jealously from this guy. On to the guage cluster. How are you bypassing the lockout?
06-16-2012, 07:17 PM
#629
at this^ scrooge mcduck lol...seriously I'd kill to have access to all the Nissan parts that you do on a daily basis. You doing a full ecu swap that's cool, in for results!
06-16-2012, 10:23 PM
#630
I wouldve liked to see the results of one of your other possible builds.
06-18-2012, 03:04 PM
#631
Only thing missing now is.....
Engine Mounts, pigtail for the other plug on the ecu, $$$ for osiris.
I have zee Z gas pedal.... Spec-V Cluster.... 04 Max ECU... 06 max motor + harness..... yeahh
Yeah I'd like to see one of my previous ones live too
:
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
10-02-2022 02:13 PM
TallTom
5th Generation Maxima (2000-2003)
50
07-08-2022 09:54 AM
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM