General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

Video: HlH runs 12.7 + 119mph on stock tires.

Thread Tools
 
Search this Thread
 
Old 09-07-2003 | 09:52 PM
  #41  
Jason R's Avatar
aka UNCDooD
iTrader: (39)
 
Joined: Jul 2002
Posts: 10,245
From: Aylett, VA
awesome video and times as well.
Old 09-07-2003 | 10:02 PM
  #42  
s0ber's Avatar
Senior Member
iTrader: (7)
 
Joined: Feb 2003
Posts: 3,834
hey hlh why dont you post all your videos on your site???? Someone post them so I can D/L all of them =) I have a maxima video collection and the only ones I have are teh ....40-120mph ones...
Old 09-08-2003 | 03:28 AM
  #43  
Audtatious's Avatar
Bandwagon Lover
 
Joined: Feb 2002
Posts: 1,023
Hal, finally got to see your 12-sec run (I was in line to "go")! I was in the stands for the run with the 'Stang and there were a lot of "oh craps" on that one and a bunch of "he even hit the brakes before the finish line and beat that Mustang" comments

The green/gold car is a 240 running a KA24DET. Not sure what his best run was, but he was having horrible traction and tranny problems ( cracked case during a run ) and actually spun the rims within the tires on a run...

Great runs and great meeting you at the track...Next time I will have friggen drag radials on instead of the blowtenza's....
Old 09-08-2003 | 03:44 AM
  #44  
JAY25's Avatar
Supporting Maxima.org Member
iTrader: (38)
 
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by hlh0501
jay: first of all a side note, your car looks sweet! saw it in the atl vids. to answer your questions, yes stock motor and stock injectors (240's?). I am controlling fuel delivery pretty much from a vortech FMU - so high fuel pressure. I dont even have a safc on the car right now I do start leaning out a little over 6000 I noticed on the dyno. off the charts rich (below 10:1) up to 6000 then it climbs to almost 14:1 I believe by fuel cut. So, on the track I shift at ~6000rpm until 4th gear I have to wind it all the way out bc I dont want to have to shift into 5th before the finish line.

)

Thanks for ans the questions Hal.



HitmanSE, I dont argue bad for my health and I try not to argue thats why I try not to post on suspension threads they are a waste.
Old 09-08-2003 | 05:54 AM
  #45  
AntGVR4's Avatar
Senior Member
 
Joined: Aug 2000
Posts: 2,308
From: Clifton, NJ
Originally Posted by hlh0501
yes stock motor and stock injectors (240's?). I am controlling fuel delivery pretty much from a vortech FMU - so high fuel pressure. I dont even have a safc on the car right now I do start leaning out a little over 6000 I noticed on the dyno. off the charts rich (below 10:1) up to 6000 then it climbs to almost 14:1 I believe by fuel cut. So, on the track I shift at ~6000rpm until 4th gear I have to wind it all the way out bc I dont want to have to shift into 5th before the finish line.
That is a fast run, but, I wouldn't try it again with the fuel setup you have.
Hard to believe you are running that rich on pump gas with those little injectors.

BOOM.

Ant
Old 09-08-2003 | 06:13 AM
  #46  
BEJAY1's Avatar
Conecarver
iTrader: (19)
 
Joined: Sep 2000
Posts: 3,855
From: NW Chicago burbs
Great job getting her finished and running solid in just a few days.

I didn't realize my tranny could do 12's.
Old 09-08-2003 | 07:32 AM
  #47  
Str8ridin's Avatar
Senior Member
 
Joined: Sep 2001
Posts: 1,185
Incredible! Just what I needed to see on this boring Monday morning....

Thanks for sharing!
Old 09-08-2003 | 08:34 AM
  #48  
hlh0501's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Sep 2000
Posts: 2,371
ant: yeah I am careful for the top end right now, need an SAFC or something to get my 6200-6700rpm taken care of - but shifting early gives me no trouble , i'm making power down low too and i love those little injectors, they pay for my dyno (when a local big-name bet me dynos that i couldnt pull 450+ on stock injectors.). even 14:1 at redline makes me feel better than 18:1 at 5500rpm, dont ask

bejay: thanks for the tranny and nice meeting you!! runs like a champ.. and without LSD i'm still seeing 2.1 60' every single pass i made so i'm not going to complain! you're tranny will do more than 12's

audtatious: your car looked GREAT. now if it would just hook up!

s0ber: all (most all) of my videos are on a webpage.. go to www.hlh0501.com and then click videos on the left nav bar.
Old 09-08-2003 | 08:51 AM
  #49  
luckee2bhere's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2002
Posts: 1,993
From: San Diego, CA
I've said it before and I'll say it again.


HLH is my idol!!!


HLH0501
Old 09-08-2003 | 08:56 AM
  #50  
mzmtg's Avatar
Minister of Silly Walks
iTrader: (11)
 
Joined: Oct 2000
Posts: 13,786
Originally Posted by HitManSE
States in his sig (and the last dyno vid) that hes got 456whp and 460lb-ft of torque, not to mention he let off be4 reaching redline (with 35shot nitrous) so im sure hes packin well over 500hp at the crank. As for the injectors But it should be the stock motor.

450 / .85 = ~530hp at the crank.
Old 09-08-2003 | 09:56 AM
  #51  
Blu's Avatar
Blu
the tits
iTrader: (63)
 
Joined: Mar 2002
Posts: 9,987
From: Charlotte, NC
WOW thats just nasty...
Old 09-08-2003 | 11:00 AM
  #52  
luckee2bhere's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2002
Posts: 1,993
From: San Diego, CA
AINT ANYONE going to make a big deal about that MPH!?!?!?!




WE HAVE A NEW RECORD!!



I think that someone might should let HLH borrow some slicks.....that is if hes confident in his :new 3rd gear COUGH COUGH:
Old 09-08-2003 | 12:59 PM
  #53  
hlh0501's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Sep 2000
Posts: 2,371
Originally Posted by luckee2bhere
AINT ANYONE going to make a big deal about that MPH!?!?!?!




WE HAVE A NEW RECORD!!



I think that someone might should let HLH borrow some slicks.....that is if hes confident in his :new 3rd gear COUGH COUGH:
haha thanks.. i maay have a set of slicks finally, I'm looking at a wheel/slick combo right now.. we'll see - but I'm open to donors The slick fund may just have to yield to putting new brake pads and rotors on all the way around this week. It's always something!

Trap speeds typically go down a little when people run on slicks, but I am assuming mine will go up considering I will then be able to spray first and second gear! we'll see someday
Old 09-08-2003 | 02:28 PM
  #54  
ivelweyz
Guest
 
Posts: n/a
Originally Posted by hlh0501
no money for them right now... some day, hopefully soon - plus it will be nice to be able to spray 1st and 2nd gear too!

and as for what turbo: i'm still on the original t3/t4, wishing I could afford to change to something crazy - but that's not for a while.

mzmtg: woo i have a new goal
Sell the H2, you'll still be little short for the slicks but it's a start...
Old 09-08-2003 | 02:46 PM
  #55  
Nealoc187's Avatar
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,631
From: West burbs, Chicago
Originally Posted by hlh0501
Trap speeds typically go down a little when people run on slicks
Mine don't.
Old 09-08-2003 | 02:50 PM
  #56  
Blu's Avatar
Blu
the tits
iTrader: (63)
 
Joined: Mar 2002
Posts: 9,987
From: Charlotte, NC
Originally Posted by Nealoc187
Mine don't.

mine either I believe that applies more too rwd guys that can hook like a bat out of hell and pull 1.5 60's or better.
Old 09-08-2003 | 02:59 PM
  #57  
maximadave's Avatar
detailerdaveb@gmail.com
iTrader: (10)
 
Joined: Sep 2000
Posts: 6,242
From: Portland, OR
Great run Hal!
Old 09-08-2003 | 03:09 PM
  #58  
max83's Avatar
Donating Maxima.org Member
 
Joined: Dec 2001
Posts: 268
That speed is incredible.
Old 09-08-2003 | 03:48 PM
  #59  
hlh0501's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Sep 2000
Posts: 2,371
Originally Posted by blubyu2k2
mine either I believe that applies more too rwd guys that can hook like a bat out of hell and pull 1.5 60's or better.
oh well then they'll be that much better!! i can't wait, well, I guess I'll have to.

thanks everyone

oh , and i wish the hummer was in my name - but as long as it isn't, it's hard to sell for slicks maybe I could pawn it? ha I'd better stick to mowing the lawn or looking for some old baseball cards to sell
Old 09-08-2003 | 09:17 PM
  #60  
ivelweyz
Guest
 
Posts: n/a
Whos H2 is it? I really dislike the car, well maybe not the car but most of the people that drive them. They always think they're the **** in their H2. I bet you're different though, right???
Old 09-10-2003 | 01:42 PM
  #61  
luckee2bhere's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2002
Posts: 1,993
From: San Diego, CA
Originally Posted by ivelweyz
Whos H2 is it? I really dislike the car, well maybe not the car but most of the people that drive them. They always think they're the **** in their H2. I bet you're different though, right???







+++OT---- what the hell is this BS: "The message you have entered is too short. Please lengthen your message to at least 10 characters."
Old 09-10-2003 | 03:02 PM
  #62  
IceY2K1's Avatar
Fastest Fantasy Maxima Evar
iTrader: (3)
 
Joined: Jan 2001
Posts: 16,245
Why did you brake against the RUSTang?

240cc injectors aren't putting down those numbers, YOUR nozzle is! Got to love wet kits.

Any idea what peak fuel pressure you see?
Old 09-10-2003 | 08:43 PM
  #63  
luckee2bhere's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2002
Posts: 1,993
From: San Diego, CA
Originally Posted by IceY2K1
Why did you brake against the RUSTang?

240cc injectors aren't putting down those numbers, YOUR nozzle is! Got to love wet kits.

Any idea what peak fuel pressure you see?
no wet involved here.
Old 09-10-2003 | 10:15 PM
  #64  
hlh0501's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Sep 2000
Posts: 2,371
Originally Posted by IceY2K1
Why did you brake against the RUSTang?

240cc injectors aren't putting down those numbers, YOUR nozzle is! Got to love wet kits.

Any idea what peak fuel pressure you see?
haha. against the rustang, well I hadn't been at the 1/4 track in a while, all 1/8 and I just thought I was finished.

wet is good stuff.

and as far as fuel pressure, I haven't checked in a while - over 100. I've been takin it easy running ~10ish psi lately (dyno+track) after my 15psi period for a while haha, thats where injectors started becoming fun and fuel pressures got crazy.
Old 09-10-2003 | 10:16 PM
  #65  
IceY2K1's Avatar
Fastest Fantasy Maxima Evar
iTrader: (3)
 
Joined: Jan 2001
Posts: 16,245
Originally Posted by luckee2bhere
no wet involved here.
NX makes dry?
Old 09-10-2003 | 10:27 PM
  #66  
Shadow's Avatar
Senior Member
iTrader: (15)
 
Joined: Aug 2000
Posts: 4,147
They do now. I think they just started this past year. I thought it was funny that NOS started marketing wet kits after stating for so long that the fuel would puddle. And that NX started making dry kits after pushing only wet kits for so long. It's always amusing when companies abandon principles for market share.

Originally Posted by IceY2K1
NX makes dry?
Old 09-10-2003 | 10:32 PM
  #67  
IceY2K1's Avatar
Fastest Fantasy Maxima Evar
iTrader: (3)
 
Joined: Jan 2001
Posts: 16,245
Originally Posted by hlh0501
haha. against the rustang, well I hadn't been at the 1/4 track in a while, all 1/8 and I just thought I was finished.

wet is good stuff.

and as far as fuel pressure, I haven't checked in a while - over 100. I've been takin it easy running ~10ish psi lately (dyno+track) after my 15psi period for a while haha, thats where injectors started becoming fun and fuel pressures got crazy.
110? 120? More?

What size shot of NX did you have? From the dyno, it looks like a HELL of a kick, 100-shot?
Old 09-11-2003 | 04:49 AM
  #68  
hlh0501's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Sep 2000
Posts: 2,371
Originally Posted by IceY2K1
110? 120? More?

What size shot of NX did you have? From the dyno, it looks like a HELL of a kick, 100-shot?
I cant remember fuel PSI , I'll try and check this week.

and no, I'm not running nearly that large of a shot - not quite that brave, atleast yet the reason the change is so dramatic on the dyno, is my wastegate cannot control anylonger when I am spraying. So, to dyno NX + 10psi, my car must be set on 5psi w/out NX. so, the change you see is boost doubling from 5->10psi and the of course NX.

Hope that made sense.
Old 09-11-2003 | 08:32 AM
  #69  
IceY2K1's Avatar
Fastest Fantasy Maxima Evar
iTrader: (3)
 
Joined: Jan 2001
Posts: 16,245
Originally Posted by hlh0501
I cant remember fuel PSI , I'll try and check this week.

and no, I'm not running nearly that large of a shot - not quite that brave, atleast yet the reason the change is so dramatic on the dyno, is my wastegate cannot control anylonger when I am spraying. So, to dyno NX + 10psi, my car must be set on 5psi w/out NX. so, the change you see is boost doubling from 5->10psi and the of course NX.

Hope that made sense.
NX causes a 5psi boost spike ....whoah!
Old 09-11-2003 | 09:46 AM
  #70  
96BLUMAX's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Sep 2000
Posts: 2,374
From: Leesburg,Virginia
Wow you just made my day with those vids hal, thanks.
Old 09-11-2003 | 09:49 AM
  #71  
hlh0501's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Sep 2000
Posts: 2,371
Originally Posted by IceY2K1
NX causes a 5psi boost spike ....whoah!
from turbonetics inc website:
"Deltagate can control boost on engines that develop 300-400HP"
Old 09-11-2003 | 09:59 AM
  #72  
Nealoc187's Avatar
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,631
From: West burbs, Chicago
Originally Posted by hlh0501
from turbonetics inc website:
"Deltagate can control boost on engines that develop 300-400HP"

Deltagates suck. Boost creep and boost spike city.
Old 09-11-2003 | 10:12 AM
  #73  
hlh0501's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Sep 2000
Posts: 2,371
Originally Posted by Nealoc187
Deltagates suck. Boost creep and boost spike city.
I actually didn't have the creep and spikes like everyone likes to complain about (until high power). I think it gets the same rep an autometer a/f gauge gets. Everyone, people who dont even own them say they do absolutely nothing. I have been satisifed with mine, and I am glad I have it even with my EGT.

deltagates do suck once you start playin over 400hp though, which is why I offer tial's now.

does anyone know what kind of power the 35/38/40's will handle?
Old 09-11-2003 | 02:51 PM
  #74  
chigga's Avatar
Senior Member
iTrader: (2)
 
Joined: May 2002
Posts: 1,181
damn hlh your car is sick....you gotta respect the time and effort to make that car the beast it is...
Old 09-11-2003 | 05:18 PM
  #75  
Nismo3112's Avatar
Custom User Title
iTrader: (12)
 
Joined: Jul 2002
Posts: 4,688
off the subject but im new at boosting and tuning and stuff....What does 10.1, 14.1 12.1 A/F all mean? BTW nice runs Hal!!
Old 09-11-2003 | 05:25 PM
  #76  
IceY2K1's Avatar
Fastest Fantasy Maxima Evar
iTrader: (3)
 
Joined: Jan 2001
Posts: 16,245
Originally Posted by ImStockBaby
off the subject but im new at boosting and tuning and stuff....What does 10.1, 14.1 12.1 A/F all mean? BTW nice runs Hal!!
10:1 = 10-parts air to 1-part fuel.

The higher the Air Fuel Ratio(A/F), the more air and less fuel.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
09-02-2021 11:03 AM
homeyclaus
Maximas for Sale / Wanted
1
09-03-2015 06:15 PM
sdotcarter
6th Generation Maxima (2004-2008)
2
09-02-2015 09:53 PM
Justin Kroll
5th Generation Maxima (2000-2003)
7
09-02-2015 11:06 AM
A32goldylocks
4th Generation Maxima (1995-1999)
2
09-02-2015 06:39 AM



Quick Reply: Video: HlH runs 12.7 + 119mph on stock tires.



All times are GMT -7. The time now is 11:21 PM.