GD: 4th gen DUAL BEAM, PROJECTOR housing, angel/demon eye option headlights
#321
Originally Posted by meccanoble
ga dayum thats hot. geo, i was about to say that i dont need high beams cause my 9004's hid low beam setup is enough light for 95% of my situations. I do hit some roads that have a serious up and down hill where i would have loved high beams. But i see how the splash of the fugly 9004's can create such a heavy amount of wide light. projectors i guess will definitely need high beam.
just to make sure that is not my car, however i wish it was
![wall](https://maxima.org/forums/images/smilies/peepwall.gif)
but yeah with a shield you dont see anything on the dark side
#322
Originally Posted by umnitza
I think those are pretty nifty![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
If we can work with them, we might be able to bring it in for less.
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
If we can work with them, we might be able to bring it in for less.
If you cooperate with HIDTech or end up handing over the whole project... well... whatever works best. I am definitely waiting for a set of projectors for the gen4, and my deposit is still ready.
#323
Originally Posted by EZEMaxima
I like that HIDTECH headlight conversion.
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_10_full.jpg)
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_20_full.jpg)
more pics of beam pattern
more insatlled pics
Hope Karl doesn't mind me posting pictures of his new projector headlights
Eric
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_10_full.jpg)
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_20_full.jpg)
more pics of beam pattern
more insatlled pics
Hope Karl doesn't mind me posting pictures of his new projector headlights
Eric
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
-Chirs
#324
Originally Posted by SupermaxGxe
I think those look really ugly! I would not buy those lights for $20. I'm still waiting to see what comes of this group deal. I mean I know that this has taken a while, but everyone seems to have forgotten how nice those headlights looked on that bmw. Guys, lets just be patient and see what this company comes out with.
-Chirs
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
-Chirs
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
j/k
#325
Originally Posted by SupermaxGxe
I think those look really ugly! I would not buy those lights for $20. I'm still waiting to see what comes of this group deal. I mean I know that this has taken a while, but everyone seems to have forgotten how nice those headlights looked on that bmw. Guys, lets just be patient and see what this company comes out with.
-Chirs
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
-Chirs
![lamer](https://maxima.org/forums/images/smilies/lamer.gif)
#326
Originally Posted by Stringztoo
...you're a moron... ![lamer](https://maxima.org/forums/images/smilies/lamer.gif)
![lamer](https://maxima.org/forums/images/smilies/lamer.gif)
-Chris
#327
Originally Posted by SupermaxGxe
I'm a moron? Look whos talking, you want to jump on the first set of lights you can buy, no matter how ugly. I've seen better looking home made headlights. Sorry about your impatients, when it comes to something for your car. I mean come on, these cars have waited at least 5 years for projectors I think you can wait a few more months.
-Chris
-Chris
And third of all, who said I'm jumping on those lights or anyone's lights for that matter?!? I never said I was buying lights from him, her, or anyone! Technically, this company (Umnitza) is the first "company" that would produce these, so you're just negating your moronic (there it is again) comments! Doh! You did a stupid again with everyone looking at you...
![Frown](https://maxima.org/forums/images/smilies/frown.gif)
You know what, please... hold your breath for me until you get the lights you truly like, then you'll keel over and die and we won't have to hear stupid **** from stupid people...
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![OrgyOwned](https://maxima.org/forums/images/smilies/orgy_owned.gif)
#328
string - I would agree with everything you said, except the attack on the chris.
Chris, you don't have to judge something by pictures. I frankly think those are nice![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
If we can come up with that and make it just as nice or nicer for less, then that's what we'll do![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
I suspect I'll have to make another trip to SoCal to make that happen
Chris, you don't have to judge something by pictures. I frankly think those are nice
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
If we can come up with that and make it just as nice or nicer for less, then that's what we'll do
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
I suspect I'll have to make another trip to SoCal to make that happen
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#329
Originally Posted by umnitza
string - I would agree with everything you said, except the attack on the chris.
Chris, you don't have to judge something by pictures. I frankly think those are nice![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
If we can come up with that and make it just as nice or nicer for less, then that's what we'll do![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
I suspect I'll have to make another trip to SoCal to make that happen![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
Chris, you don't have to judge something by pictures. I frankly think those are nice
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
If we can come up with that and make it just as nice or nicer for less, then that's what we'll do
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
I suspect I'll have to make another trip to SoCal to make that happen
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
Dude, I am sick of stupid people saying stupid things. I'll be honest, I liked what I heard when this all started, but I'm losing faith in you guys at Umnitza because you said you can't fit bi-xenons in the housing even when it's been done countless times before. Not to mention the fact this thread started back in October of 2003...
So far geo's, soul's, and even Mad-Max's lights are all awesome. Being unique and different is what sets our cars apart. They are all functional and should not be judged as being "ugly".
I hope you guys come up with something soon because this is something that should be out there for us. Otherwise, they'll be alot of home-made sets out there and alot of angry (and broke) people.
#330
Originally Posted by Stringztoo
Dude, I am sick of stupid people saying stupid things. I'll be honest, I liked what I heard when this all started, but I'm losing faith in you guys at Umnitza because you said you can't fit bi-xenons in the housing even when it's been done countless times before. Not to mention the fact this thread started back in October of 2003...
So far geo's, soul's, and even Mad-Max's lights are all awesome. Being unique and different is what sets our cars apart. They are all functional and should not be judged as being "ugly".
I hope you guys come up with something soon because this is something that should be out there for us. Otherwise, they'll be alot of home-made sets out there and alot of angry (and broke) people.
So far geo's, soul's, and even Mad-Max's lights are all awesome. Being unique and different is what sets our cars apart. They are all functional and should not be judged as being "ugly".
I hope you guys come up with something soon because this is something that should be out there for us. Otherwise, they'll be alot of home-made sets out there and alot of angry (and broke) people.
![ThumbsDown](https://maxima.org/forums/images/smilies/thumbsdown.gif)
umnitza is a large company and it takes a long time for them to come out with a product because they have to make sure it will be cost efective for them to make and reliable for us to use. besides hid-tech there have only been 2 people who have made projector setups made for the 4th gen, geo and indigo. you have to realize that Geo himself said that there is no practical way to mass produce these HID projectors for our car after he did it himself, and while indigo's light looked good at first everyone knows what happened with that project.
i don't see why anyone would be angry if this deal falls through. upset YES, angry, NO. it would just mean that umnitza has decided that it wouldn't be worth their time and money to make these and that is their right. its not like you put a deposit down for them or something.
if you want projectors that bad than go spend $900 for them at hid-tech (those look great but cost way too much for me) or stop *****in at people on this forum and make your own
![lamer](https://maxima.org/forums/images/smilies/lamer.gif)
#334
I think everyone should stop replying unless there's some real news. Cuz everytime I get an email notice that someone has replied, I log on to the message board in hopes of seeing some news, but 90% of the time it's just someone *****ing.
#335
Originally Posted by SaNdMaN
I think everyone should stop replying unless there's some real news. Cuz everytime I get an email notice that someone has replied, I log on to the message board in hopes of seeing some news, but 90% of the time it's just someone *****ing.
#336
Gentlemen I’m the owner of those lights, and I just checked out this thread for the first time since it started. I read the last four pages and I’m sorry to hear of the delays and the impatience that has grown out of the wait.
[QUOTE=EZEMaxima]I like that HIDTECH headlight conversion.
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_10_full.jpg)
This shot are from my old 8500k 9004 kit. This is on page two of my site
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_20_full.jpg)
The beam patterns for the Bi-xenons are on page three of my site. Please don't confuse one for the other.
The key to everything is being informed, and having the right info. I listed the threads below, they have ALL INFO on my retrofit, cost, links to other companies, forums, and how to. Just read and you will find all the info you need. Just be informed.
My thread
http://forums.maxima.org/showthread.php?t=284370
Geo’s thread
http://forums.maxima.org/showthread.php?t=286684
Mad
http://forums.maxima.org/showthread.php?t=287030
Mec’s thread
http://forums.maxima.org/showthread.php?t=287244&page=1
Peace
[QUOTE=EZEMaxima]I like that HIDTECH headlight conversion.
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_10_full.jpg)
This shot are from my old 8500k 9004 kit. This is on page two of my site
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_20_full.jpg)
The beam patterns for the Bi-xenons are on page three of my site. Please don't confuse one for the other.
The key to everything is being informed, and having the right info. I listed the threads below, they have ALL INFO on my retrofit, cost, links to other companies, forums, and how to. Just read and you will find all the info you need. Just be informed.
My thread
http://forums.maxima.org/showthread.php?t=284370
Geo’s thread
http://forums.maxima.org/showthread.php?t=286684
Mad
http://forums.maxima.org/showthread.php?t=287030
Mec’s thread
http://forums.maxima.org/showthread.php?t=287244&page=1
Peace
#338
Originally Posted by EZEMaxima
I like that HIDTECH headlight conversion.
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_10_full.jpg)
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_20_full.jpg)
more pics of beam pattern
more insatlled pics
Hope Karl doesn't mind me posting pictures of his new projector headlights
Eric
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_10_full.jpg)
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_20_full.jpg)
more pics of beam pattern
more insatlled pics
Hope Karl doesn't mind me posting pictures of his new projector headlights
Eric
![](http://images.cardomain.com/member_images/12/web/432000-432999/432373_28.jpg)
Here is the correct beam pattern
#341
y dont someone take geo1317 concept and fabricate some sort of housing. id do it but i dont ahve the time or the know how.. maxedoutofcash is doin it. he has tried to, but broke the housing he was using and time fell short for him.. tony, geo, bigsadler.. u guys have ideas im sure and u guys know people in high places.. just neeed a design and relocation of sum things in the engine bay..
is there a company that can do this.. they would meake a killing in this if they could. dont meant o diss the thread, actually quite opposite.. everyones losing faith in this, but none is giving any ideas on how to..
just my 2 cents. just venting a bit..
blake
is there a company that can do this.. they would meake a killing in this if they could. dont meant o diss the thread, actually quite opposite.. everyones losing faith in this, but none is giving any ideas on how to..
just my 2 cents. just venting a bit..
blake
#346
Supporting Maxima.org Member
![](https://maxima.org/forums/images/smilies/support.gif)
Thread Starter
iTrader: (14)
Join Date: Dec 2000
Location: Ontario, Canada
Posts: 2,404
Update:
Just to alleviate everyone's concerns, Matt from Umnitza was in touch with me last week, looking for a gen 4 headlight with a clear cover (which does not exist). Their aim is to make a dual projector design... or nothing. They have done a bit of research in their area and will have an answer for us as to yay or nay, shortly. As of early last week, they wanted 2-3 weeks. So we should hear back from Matt shortly.
They are working hard at it to give it ALL to us. Hope they can find a way. They do have headlight and corner light samples that they are working with otherwise.
Just to alleviate everyone's concerns, Matt from Umnitza was in touch with me last week, looking for a gen 4 headlight with a clear cover (which does not exist). Their aim is to make a dual projector design... or nothing. They have done a bit of research in their area and will have an answer for us as to yay or nay, shortly. As of early last week, they wanted 2-3 weeks. So we should hear back from Matt shortly.
They are working hard at it to give it ALL to us. Hope they can find a way. They do have headlight and corner light samples that they are working with otherwise.
#347
Originally Posted by speedemn
Update:
Just to alleviate everyone's concerns, Matt from Umnitza was in touch with me last week, looking for a gen 4 headlight with a clear cover (which does not exist). Their aim is to make a dual projector design... or nothing. They have done a bit of research in their area and will have an answer for us as to yay or nay, shortly. As of early last week, they wanted 2-3 weeks. So we should hear back from Matt shortly.
They are working hard at it to give it ALL to us. Hope they can find a way. They do have headlight and corner light samples that they are working with otherwise.
Just to alleviate everyone's concerns, Matt from Umnitza was in touch with me last week, looking for a gen 4 headlight with a clear cover (which does not exist). Their aim is to make a dual projector design... or nothing. They have done a bit of research in their area and will have an answer for us as to yay or nay, shortly. As of early last week, they wanted 2-3 weeks. So we should hear back from Matt shortly.
They are working hard at it to give it ALL to us. Hope they can find a way. They do have headlight and corner light samples that they are working with otherwise.
#353
![](http://images.cardomain.com/member_images/4/web/436000-436999/436051_60_full.jpg)
These are made to fit a cefiro. Do you see the halos? If it can hold two reflectors and a corner bulb, then Umnitza can fit two projectors w/ a corner bulb into a 4th gen, right?
![Confused](https://maxima.org/forums/images/smilies/confused.gif)
#354
Supporting Maxima.org Member
![](https://maxima.org/forums/images/smilies/support.gif)
Thread Starter
iTrader: (14)
Join Date: Dec 2000
Location: Ontario, Canada
Posts: 2,404
Final Update
http://forums.maxima.org/showthread.php?t=293700
Sorry guys, I/we tried. Better to have tried and lost than not tried at all.
Anish
http://forums.maxima.org/showthread.php?t=293700
Sorry guys, I/we tried. Better to have tried and lost than not tried at all.
Anish
Thread
Thread Starter
Forum
Replies
Last Post
Maxima_Joe
4th Generation Classifieds (1995-1999)
16
11-25-2015 08:19 AM