5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

5th Gen "I AM NEW HERE BUT HAVE A QUESTION" thread

Thread Tools
 
Search this Thread
 
Old 12-16-2006, 06:35 PM
  #721  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by Fox_90
Just a couple of quick ones, in the rear clunking at lower speeds sounds like the strut towers, wondering if this is a common problem. Secondly I have a vibration between 90-120km and the tires have been checked mulitple times, C.P.R on the brakes all around and all is well? Any ideas? Again could this come back to the struts? Lastly how do I get the privledges to participate in the regular forum? Thanks to all that answer

Fox
The 2000 Maxima has a fairly common problem with blown right front struts, if you're still stock. This could cause both of your problems - the clunk and teh vibration (cupping).
irish44j is offline  
Old 12-16-2006, 06:37 PM
  #722  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by oldmanshirt
I'm interested in installing Hawk brake pads (either ceramic or HPS), but since I have extremely limited experience doing brake work, I wanted to have a trusted mechanic do the work. The only one I know wants $105 to change the pads and machine the rotors (this doesn't include the price of the pads). As far as I know, both my rotors and the pads I've been using are stock.

My question is, do the rotors really need to be machined, or is he just trying to get more money? My car has 76k miles on it, but I've only had it since 61k and I've only been moderately hard on the brakes in that time. There is a pulsing sometimes on longer stops from speeds of about 55+ mph, but a few ppl on here have said it might be a buildup of pad material. If all I need to do is change the pads, then I'd rather do it myself. But should I also get the rotors machined like this guy says?
105 sounds about right for 1 hour shop labor and turning the rotors. Turning (cutting) the rotors will get rid of uneven pad buildup left from stock pads. It's a good idea.
irish44j is offline  
Old 12-16-2006, 06:38 PM
  #723  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by Daniel514bama
Time to change cv axles on my auto 2000 max. With no leaking from tranny axle seal, should I be concerned with causing a leak? Should I go ahead and replace these seals if they are okay since I'm already there? Thanks.
It's best to change the seals. i didn't, and have a very (VERY) slow leak from one now. I check the fluid once a month and it's still at the top after a few months, but in retrospect it would have been a good idea to do the seals at thesame time. They're cheap and easy to replace.
irish44j is offline  
Old 12-16-2006, 06:39 PM
  #724  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by GigEmAgs07
what is the benefit of slotted rotors? found a set on craigslist for 40 bones.
There is NO benefit for street applications unless you are in a high-debris environment (ie. driving on dirt roads alot). Anyone who says otherwise is full of it

They're just for looks for 99% of people who get them.
irish44j is offline  
Old 12-16-2006, 06:53 PM
  #725  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by bjr
I was wondering where guys get there yellow fog light bulbs/covers. Thanks.
HIDTech.com
irish44j is offline  
Old 12-17-2006, 02:31 PM
  #726  
Senior Member
iTrader: (2)
 
ICEMAN76's Avatar
 
Join Date: Oct 2006
Location: Goldsboro, NC
Posts: 583
My lighter doesn't work. Would it be too hard to fix?? I was wondering if there was a fuse behind the jack, or is there only one in the lighter itself?
ICEMAN76 is offline  
Old 12-17-2006, 09:54 PM
  #727  
Junior Member
iTrader: (1)
 
2002MaxNJ's Avatar
 
Join Date: Dec 2006
Posts: 48
Wassup everybody...new member here....
Bose radio problem....I searched and searched and nada....

I got a 2002 SE w/stock navigation and one morning I jump in the car and my radio turns on but no sound....I also lost control of my cd changer....the radio looks fine...it shows volume levels and stations...and the cd changer is getting power cuz it spits out the magazine with no prob when opened....
I checked all the audio fuses under the steering wheel and by the battery and they are all fine...I even switched a few same amp fuses just to double check and nothing....and now from switching fuses with the acc switch open my check engine light came on but thats another story....any help with this bose issue is greatly appreciated...Thanks
2002MaxNJ is offline  
Old 12-17-2006, 10:07 PM
  #728  
Go BUCKS!!!
iTrader: (10)
 
SEmy2K2go's Avatar
 
Join Date: Aug 2003
Location: Delaware, OH-IO
Posts: 9,562
Originally Posted by ICEMAN76
My lighter doesn't work. Would it be too hard to fix?? I was wondering if there was a fuse behind the jack, or is there only one in the lighter itself?
Most likely the fuse located in the fuse panel.
SEmy2K2go is offline  
Old 12-17-2006, 10:44 PM
  #729  
Senior Member
 
GigEmAgs07's Avatar
 
Join Date: Nov 2005
Location: San Diego, CA
Posts: 404
again, anyone know if a 98 customenterprise fstb will fit on my 2k?
GigEmAgs07 is offline  
Old 12-17-2006, 11:36 PM
  #730  
Senior Member
iTrader: (2)
 
ICEMAN76's Avatar
 
Join Date: Oct 2006
Location: Goldsboro, NC
Posts: 583
Originally Posted by SEmy2K2go
Most likely the fuse located in the fuse panel.
I think that I checked that too. Anyway, thanks for the advice SE.
ICEMAN76 is offline  
Old 12-18-2006, 11:38 AM
  #731  
Newbie - Just Registered
 
bostonirishguy's Avatar
 
Join Date: Mar 2006
Posts: 1
2000 GLE Highway Mileage Question

I have a 2000 Maxima GLE. Filled up the tank right before hitting the highway. Then I reset the trip odometer. Put 111 miles (all highway) roundtrip. After getting back off the highway, filled up again and checked mileage. The tank took 2.966 gallons. It worked out to 37mpg. This seems a little high to me. I thought the estimated highway mpg was about 27-28? Any thoughts?
bostonirishguy is offline  
Old 12-18-2006, 04:40 PM
  #732  
IllegalMax
Guest
 
Posts: n/a
does anyone have any sound clips of a JIC catback for a 02 max. i looked in the exhaust thread and found nothing. my max is stock right now but i am ordering a injen cai an want a catback also. im stuck between greedy and jic. i want a exhaust that can be heard. any help is appreciated. thank you
 
Old 12-18-2006, 05:13 PM
  #733  
Supporting Maxima.org Member
iTrader: (6)
 
NismO2max's Avatar
 
Join Date: Dec 2006
Location: CT
Posts: 195
Hey guys, noob hear!
I dont have a question, Im just saying hi...introducin'...bla bla bla.

Say hi to Josh folks
NismO2max is offline  
Old 12-18-2006, 06:54 PM
  #734  
Junior Member
 
1PhatMax's Avatar
 
Join Date: Dec 2006
Posts: 23
2k fogs vs 2k2

I was wondering if anyone knows if 00-01 fog light housings/light can fit in 02-03....the reason is that i saw a set of smoked lights on ebay that said it is for 00-01 and i wanted to know if there will be a problem buying those and installing them.If they do not work can someone point me in the direction in buying smoked fogs for my 2k2 Se.Thanks for the help!
1PhatMax is offline  
Old 12-18-2006, 09:03 PM
  #735  
Junior Member
 
YungmaxiOwna21's Avatar
 
Join Date: Dec 2006
Posts: 32
Newbie in need of advice... Nothin new

Just curious... Will the '01-03 Electronic climate control fit and work in a 2000 maxima SE replacing the original manual AC controls? Saw one for sale and wouldnt mind having it installed.

Also whats everyones opinion on aftermarket sunroofs? Do or dont any1 please
YungmaxiOwna21 is offline  
Old 12-19-2006, 10:41 AM
  #736  
Senior Member
 
JohnWEngle's Avatar
 
Join Date: Mar 2006
Posts: 116
Originally Posted by bostonirishguy
I have a 2000 Maxima GLE. Filled up the tank right before hitting the highway. Then I reset the trip odometer. Put 111 miles (all highway) roundtrip. After getting back off the highway, filled up again and checked mileage. The tank took 2.966 gallons. It worked out to 37mpg. This seems a little high to me. I thought the estimated highway mpg was about 27-28? Any thoughts?
Well, if you put 3.966 gallons in, then it works out to be ~28mpg....

The question comes as to how you know that is the quantity of gasoline you used. If you are using the reading off the pump, then that is likely where the error comes. Not that the pump reads the incorrect amount, but if you are gauging the tank being full based upon when the pump shuts off, then that is where the "error" is occurring. No two pumps shut off at the same point, and the shut off point can vary wildly. The only way to get a good handle on fuel economy is averaging over time. In other words, take a bunch of MPG readings and then look at the trend. And even then, you'll see your fuel economy change with the seasons.....
JohnWEngle is offline  
Old 12-19-2006, 08:16 PM
  #737  
Junior Member
 
1PhatMax's Avatar
 
Join Date: Dec 2006
Posts: 23
Originally Posted by 1PhatMax
I was wondering if anyone knows if 00-01 fog light housings/light can fit in 02-03....the reason is that i saw a set of smoked lights on ebay that said it is for 00-01 and i wanted to know if there will be a problem buying those and installing them.If they do not work can someone point me in the direction in buying smoked fogs for my 2k2 Se.Thanks for the help!
*Bump*
thanks again
1PhatMax is offline  
Old 12-19-2006, 08:19 PM
  #738  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by NismO2max
Hey guys, noob hear!
I dont have a question, Im just saying hi...introducin'...bla bla bla.

Say hi to Josh folks
There is only one Josh that matters in these parts. And he is me

welcome. I will call you "mini-josh"
irish44j is offline  
Old 12-19-2006, 08:42 PM
  #739  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by YungmaxiOwna21
Just curious... Will the '01-03 Electronic climate control fit and work in a 2000 maxima SE replacing the original manual AC controls? Saw one for sale and wouldnt mind having it installed.

Also whats everyones opinion on aftermarket sunroofs? Do or dont any1 please
if you're willing to spend enough time and money, anything can be done. To install the electronic climate control, you will need more than the dash unit. You need teh computer controller, several different sensors, and alot of new wiring. In theory, it can be done. But I don't recall that anyone has successfully done the conversion successfully
irish44j is offline  
Old 12-19-2006, 11:24 PM
  #740  
Newbie - Just Registered
 
matt_aitchison's Avatar
 
Join Date: Sep 2006
Posts: 12
Miss Fire

I have a 20th Anniversary, 2001 Maxima. Keep in mind my plugs and coils are good, what else can cause it to missfire. I am thinking maybe the cat, or maybe the Mass air flow sensor. What other things can I check. Keep in mind it doesn't always missfire, just hear and there.
matt_aitchison is offline  
Old 12-20-2006, 04:16 PM
  #741  
Supporting Maxima.org Member
iTrader: (6)
 
NismO2max's Avatar
 
Join Date: Dec 2006
Location: CT
Posts: 195
Does anyone have/ has anyone seen the LED tail lights from customenterprise.com on a car?

Im trying to get a feel for what they'd look like on my Max...

tyia
NismO2max is offline  
Old 12-21-2006, 06:13 AM
  #742  
Senior Member
iTrader: (18)
 
Tee00Max's Avatar
 
Join Date: Dec 2006
Location: Atlanta, GA
Posts: 647
Yes am i noob and i have a 2000 Max and i jus ordered the Maas M23 18" chromes on General Exclaim UHP (235/40/18) and i was wondering if the ride would b good on it?? and was that the best tire size to get?? thanks
Tee00Max is offline  
Old 12-21-2006, 09:34 AM
  #743  
IllegalMax
Guest
 
Posts: n/a
Originally Posted by IllegalMax
does anyone have any sound clips of a JIC catback for a 02 max. i looked in the exhaust thread and found nothing. my max is stock right now but i am ordering a injen cai an want a catback also. im stuck between greedy and jic. i want a exhaust that can be heard. any help is appreciated. thank you
come on man someone help...this is driving me crazy i need my cat-back but dont know which one to choose. i want something deep and loud.
 
Old 12-21-2006, 03:43 PM
  #744  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by IllegalMax
come on man someone help...this is driving me crazy i need my cat-back but dont know which one to choose. i want something deep and loud.
don't buy anything from custommaxima/customenterprise....unless you like 50/50 odds of actually getting it.

catback, there is only one on the market anymore that's worthwhile: Cattman.
irish44j is offline  
Old 12-21-2006, 03:46 PM
  #745  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by G&S Maxima
Yes am i noob and i have a 2000 Max and i jus ordered the Maas M23 18" chromes on General Exclaim UHP (235/40/18) and i was wondering if the ride would b good on it?? and was that the best tire size to get?? thanks
shouldn't you have asked about the ride BEFORE you ordered them? the tires are teh correct size, but I don't know much about General tires. Those wheels look heavy as crap, which means ride quality will probably be poor compared to a light wheel.

Those wheels though......ugh.

irish44j is offline  
Old 12-21-2006, 04:21 PM
  #746  
Senior Member
iTrader: (18)
 
Tee00Max's Avatar
 
Join Date: Dec 2006
Location: Atlanta, GA
Posts: 647
what about the wheels??? Those Generals are numba 1 on tirerack so im willing to try something new.....
Tee00Max is offline  
Old 12-21-2006, 04:38 PM
  #747  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by G&S Maxima
what about the wheels??? Those Generals are numba 1 on tirerack so im willing to try something new.....
tires = if they are ranked good, then good. I'm sure they have been talked about in the wheels/tires forum here.

wheels....chrome + heavy + only 7.5" wide.......no thanks. But each to his own....
irish44j is offline  
Old 12-21-2006, 04:50 PM
  #748  
Senior Member
iTrader: (18)
 
Tee00Max's Avatar
 
Join Date: Dec 2006
Location: Atlanta, GA
Posts: 647
i mean im new to all this stuff so i really dont know if its 7.5" wide or anything like that what does that mean newayz and im not doin nuttin wit my max but driving it so......i jus want it to b a clean car...
Tee00Max is offline  
Old 12-21-2006, 05:12 PM
  #749  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by G&S Maxima
i mean im new to all this stuff so i really dont know if its 7.5" wide or anything like that what does that mean newayz and im not doin nuttin wit my max but driving it so......i jus want it to b a clean car...
browse around in this forum and learn:

http://forums.maxima.org/forumdisplay.php?f=71
irish44j is offline  
Old 12-21-2006, 06:19 PM
  #750  
Senior Member
iTrader: (18)
 
Tee00Max's Avatar
 
Join Date: Dec 2006
Location: Atlanta, GA
Posts: 647
i mean yea i looked around but i mean i really aint see nuttin can u jus briefly explain what that means and how you kno it was 7.5??
Tee00Max is offline  
Old 12-21-2006, 07:57 PM
  #751  
retired moderator
iTrader: (38)
 
irish44j's Avatar
 
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by G&S Maxima
i mean yea i looked around but i mean i really aint see nuttin can u jus briefly explain what that means and how you kno it was 7.5??
The only size I saw those rims in anyplace was 18x7.5

7.5" is the width of the rim. Wider than stock (7"), but most people who go with 18's prefer a 8" or 8.5" wide rim so you can go with a wider tire.
irish44j is offline  
Old 12-21-2006, 09:45 PM
  #752  
Junior Member
 
1PhatMax's Avatar
 
Join Date: Dec 2006
Posts: 23
Help Please...

I just want to make sure that 00-01 fog light housings/light can fit in 02-03"i don't think they could"....the reason is that i saw a set of smoked lights on ebay that said it is for 00-01 and i wanted to know if there will be a problem buying those and installing them.If they do not work can someone point me to a site that has smoked fogs for my 2k2 Se.Thanks for the help!
1PhatMax is offline  
Old 12-21-2006, 10:25 PM
  #753  
2002 maxima se
iTrader: (7)
 
OC guy's Avatar
 
Join Date: Apr 2006
Location: BUENA PARK, CA (orange county)
Posts: 1,082
Originally Posted by 1PhatMax
I just want to make sure that 00-01 fog light housings/light can fit in 02-03"i don't think they could"....the reason is that i saw a set of smoked lights on ebay that said it is for 00-01 and i wanted to know if there will be a problem buying those and installing them.If they do not work can someone point me to a site that has smoked fogs for my 2k2 Se.Thanks for the help!
they wont fit in 02-03. those fog lights on ebay will not even fit the actual vehicle because to fit those in 00-01 you'll need to do rewiring. if you search for 02-03 fogs they will also need rewiring.
OC guy is offline  
Old 12-22-2006, 09:07 AM
  #754  
Newbie - Just Registered
 
TontonPoulet's Avatar
 
Join Date: Apr 2006
Posts: 3
Memory seat malfunction....

Just the other day, I changed my rims & tires for winter ones. I had to put 2 tires in the trunk and 2 in back of the front seats. (in the leg space area in the backseat). The problem is that I left the auto adjust feature on. So when you open the door, the seat moves back, the seat moves to the original position when the door is closed. Since the tire was behind it, the seat didn't really move back because there was no space. Ever since then, the seat won't go back anymore when the door opens. There was a point where it moved just a tiny bit but it never got better. The memory seats still work if I press the buttons on the door panel. But I couldn't find anything in the forums that had a trick to reset it or something like that. It's not a major problem, but it sure is annoying. I have long legs and kinda got spoiled by that feature to get in/out of the car. Any help would be greatly appreciated.
TontonPoulet is offline  
Old 12-23-2006, 10:03 AM
  #755  
Junior Member
iTrader: (1)
 
2002MaxNJ's Avatar
 
Join Date: Dec 2006
Posts: 48
Originally Posted by 2002MaxNJ
Wassup everybody...new member here....
Bose radio problem....I searched and searched and nada....

I got a 2002 SE w/stock navigation and one morning I jump in the car and my radio turns on but no sound....I also lost control of my cd changer....the radio looks fine...it shows volume levels and stations...and the cd changer is getting power cuz it spits out the magazine with no prob when opened....
I checked all the audio fuses under the steering wheel and by the battery and they are all fine...I even switched a few same amp fuses just to double check and nothing....and now from switching fuses with the acc switch open my check engine light came on but thats another story....any help with this bose issue is greatly appreciated...Thanks

no one?

also I get an average of 17mpg...is that average for non highway driving?
2002MaxNJ is offline  
Old 12-24-2006, 03:02 PM
  #756  
Newbie - Just Registered
 
Folsomfella's Avatar
 
Join Date: Dec 2006
Posts: 2
Hey all. The headlights on my 2000 Maxima are really filthy on the inside. ANy tips on getting them clean? Do I have to remove the whole headlight assembly to clean them?

Thanks
Folsomfella is offline  
Old 12-24-2006, 06:00 PM
  #757  
dot dot dot ...
iTrader: (22)
 
NmexMAX's Avatar
 
Join Date: Dec 2000
Location: Santa Fe, NM
Posts: 34,588
Originally Posted by 2002MaxNJ
is that average for non highway driving?
yes . . . .
NmexMAX is offline  
Old 12-25-2006, 08:28 AM
  #758  
Senior Member
iTrader: (18)
 
Tee00Max's Avatar
 
Join Date: Dec 2006
Location: Atlanta, GA
Posts: 647
Yea i was wondering what the factory sub size in a 2000 Max SE.....either was it a 10 or 8 bose because i was thinkin about switchin it out??? thanks....
Tee00Max is offline  
Old 12-26-2006, 10:42 PM
  #759  
Junior Member
 
whiteghost's Avatar
 
Join Date: Mar 2005
Location: houston, tx
Posts: 51
i was just bored and curious, but does anyone think that this fix would help guys
w/o HIDs? http://www.nicoclub.com/articles.php?id=97477

i just hate the flipping on/off low beam. thanks...
whiteghost is offline  
Old 12-27-2006, 11:56 AM
  #760  
Senior Member
iTrader: (1)
 
machinehead131's Avatar
 
Join Date: May 2006
Posts: 772
can anyone direct me to the 2003 oil catch can tutorial
machinehead131 is offline  


Quick Reply: 5th Gen "I AM NEW HERE BUT HAVE A QUESTION" thread



All times are GMT -7. The time now is 02:20 AM.