Show Us Whats In Your Trunk...
I've got in between $5 - $6000 And I'm not done either. I'd like to add 2 TV's in the headrests (as soon as I get leather seats) and a 4000 watt Eclipse amp and Eclipse Subs in a custom enclosure
Oh yeah
Oh yeah
Here's a few pictures of the sub enclosure I just built. Its my first system, but damn it sounds good.
(2) 10" Type Rs with a Soundstream EGA2300 bridged mono (600Wx1)
Enclosure in progress:

Installed:

This shows how much room is still left in the trunk. Box is only 10" deep. And no, that's not a blood stain:
(2) 10" Type Rs with a Soundstream EGA2300 bridged mono (600Wx1)
Enclosure in progress:

Installed:

This shows how much room is still left in the trunk. Box is only 10" deep. And no, that's not a blood stain:
Thanks sk24iam...the prices for the setup were:
Soundstream 600x1 amp: $129
Two 10" Type Rs: $198
1 sheet MDF: $18
Liquid Nails, Silicon and Screws: $12
4 gauge amp kit: $28
20 square feet of carpet: $17
So just over $400.
They sound awesome, and get way loud enough for what I want. I've run them as loud as I'm comfortable with for about 20 mins, felt the amp, and it was just barely beginning to get warm to the touch (highly recommend soundstream amps, even their bottom of the line ones). Since the subs can handle 300 RMS, and thats what the amp gives to each, I guess I'll try and crank them all the way, and see what happens
As for the mounting: I took the 2x4 that you can see in the picture, laid it flat, and then cut the ends to match the angle of the wheel wells where they would meet. I then used a rubber hammer to wedge the 2x4 between the wheel wells (hit it towards the front of the car once the sub enclosure was sitting on top of it).
I'm not exactly sure how, but wedging that board underneath somehow pushed the back top edge of the enclosure into the padding covering the rear seat, and it sort of just stuck there. No amount of braking or accelerating up hills seems to dislodge the box, even though its not really bolted or stuck to anything! The fact that it weighs close to 100 lbs probably helps keep it there.
Keeping my fingers crossed...
Soundstream 600x1 amp: $129
Two 10" Type Rs: $198
1 sheet MDF: $18
Liquid Nails, Silicon and Screws: $12
4 gauge amp kit: $28
20 square feet of carpet: $17
So just over $400.
They sound awesome, and get way loud enough for what I want. I've run them as loud as I'm comfortable with for about 20 mins, felt the amp, and it was just barely beginning to get warm to the touch (highly recommend soundstream amps, even their bottom of the line ones). Since the subs can handle 300 RMS, and thats what the amp gives to each, I guess I'll try and crank them all the way, and see what happens

As for the mounting: I took the 2x4 that you can see in the picture, laid it flat, and then cut the ends to match the angle of the wheel wells where they would meet. I then used a rubber hammer to wedge the 2x4 between the wheel wells (hit it towards the front of the car once the sub enclosure was sitting on top of it).
I'm not exactly sure how, but wedging that board underneath somehow pushed the back top edge of the enclosure into the padding covering the rear seat, and it sort of just stuck there. No amount of braking or accelerating up hills seems to dislodge the box, even though its not really bolted or stuck to anything! The fact that it weighs close to 100 lbs probably helps keep it there.
Keeping my fingers crossed...
Originally Posted by Neptune97
I'm not exactly sure how, but wedging that board underneath somehow pushed the back top edge of the enclosure into the padding covering the rear seat, and it sort of just stuck there. No amount of braking or accelerating up hills seems to dislodge the box, even though its not really bolted or stuck to anything! The fact that it weighs close to 100 lbs probably helps keep it there.
Keeping my fingers crossed...
Keeping my fingers crossed...
Tony
I can't wait to get mine in.
I have 2 Kicker L7 12"'s
1 Alpine MRV540
2 pair Alpine Type R 61/2" components
I need my bass amp and a head unit. Then in it goes and up goes the pics.
The Viper 971XVw/ remote start is going in next weekend. To protect my other toys.
I have 2 Kicker L7 12"'s
1 Alpine MRV540
2 pair Alpine Type R 61/2" components
I need my bass amp and a head unit. Then in it goes and up goes the pics.
The Viper 971XVw/ remote start is going in next weekend. To protect my other toys.
Well mine is finally finished. I accomplished exactly what I wanted. A nice kick in the @ss with a usable trunk. Had a local shop build up the glass box but I did the rest. Now I gotta solve all the interior rattle issues. One layer of Cascade was enough for the front doors but I need to do the rears and deck lid. BTW, y'all got some nice sound.






Guest
Posts: n/a
Originally Posted by bigleman
i just finished carpeting i will post those as soon as i get pics
[QUOTE=broaner22]Well mine is finally finished. I accomplished exactly what I wanted. A nice kick in the @ss with a usable trunk. Had a local shop build up the glass box but I did the rest. Now I gotta solve all the interior rattle issues. One layer of Cascade was enough for the front doors but I need to do the rears and deck lid. BTW, y'all got some nice sound.
Awesome job...
[QUOTE=MannyNJ2k2max]
Nice set-up!
Originally Posted by filtor1
BUMP
I didn't want my favorite audio thread to die.
I didn't want my favorite audio thread to die.
Originally Posted by broaner22
Well mine is finally finished. I accomplished exactly what I wanted. A nice kick in the @ss with a usable trunk. Had a local shop build up the glass box but I did the rest. Now I gotta solve all the interior rattle issues. One layer of Cascade was enough for the front doors but I need to do the rears and deck lid. BTW, y'all got some nice sound.








here are a couple of pics of my current setup. i have 3 audiobahn alum 12x and a sh!tty amp my friend passed on to me. This system really pounds when its paired with a nice amp, tryed it with my friends amp and i was blown away. this is my second setup( 1st was 2 performance techniques 12's and a matching perf tech amp at 800 watts.) This current setup will stay in till i decide what to do, i luv the subs so i might keep em and just get a better amp. more pics are at my cardomain site Click Me For More Pics
Originally Posted by Magikone69
here are a couple of pics of my current setup. i have 3 audiobahn alum 12x and a sh!tty amp my friend passed on to me. This system really pounds when its paired with a nice amp, tryed it with my friends amp and i was blown away. this is my second setup( 1st was 2 performance techniques 12's and a matching perf tech amp at 800 watts.) This current setup will stay in till i decide what to do, i luv the subs so i might keep em and just get a better amp. more pics are at my cardomain site Click Me For More Pics

Originally Posted by ShRapNeR
although i don't have pics yet.....
(since i don't have this complete yet) but here is what i will have
12" XXX
Hifonics bx1500d amp
(since i don't have this complete yet) but here is what i will have
12" XXX
Hifonics bx1500d amp
Originally Posted by ShRapNeR
although i don't have pics yet.....
(since i don't have this complete yet) but here is what i will have
12" XXX
Hifonics bx1500d amp
(since i don't have this complete yet) but here is what i will have
12" XXX
Hifonics bx1500d amp
alright finnaly took pictures of my box all carpeted. i chose astroturf cause it kinda goes w/ my cars color scheme, it was different, and it was cheap lol. those are 2 12" XXX subs and they are run by 2 Hifonics bx1500ds. the amps are mounted in my wheel well, and i have 2 fans down there to keep things cool. ive had all this for a while, just never got the chance to carpet it and make it all presentable till recently. hope you enjoy. Greg


haha that astroturf is awesome, can't wait till i get my new sub and can build a custom box and whatnot.
hopefully to be my new sub, powered by my Planet Audio 1250D
in a NEAT and hidden setup haha.
hopefully to be my new sub, powered by my Planet Audio 1250D
in a NEAT and hidden setup haha.











