Infiniti I30/I35 Similar to a Maxima, yet not really a Maxima. Discussion forum on Nissan's luxury model, the Infiniti I30/I35

NOOBIES: The "I AM NEW HERE BUT HAVE A QUESTION" thread...

Thread Tools
 
Search this Thread
 
Old 10-07-2009 | 04:04 PM
  #281  
danI30's Avatar
Newbie - Just Registered
 
Joined: Jul 2009
Posts: 4
Another question of my own... I have a 1998 I30 150k miles....today I pulled the cap off my coolant expansion tank and discovered a horrible smelling brown sludge instead of coolant. I will be flushing the system saturday, and Ill see what happens, but just wondering if any of you have run into the same situation. Im worried headgaskets are leaking oil into the coolant (the car does loose a LOT of oil, it seems to all be accounted for on the ground though) and the car is done for. However its never overheated, and the oil shows no signs of coolant, and there is no white smoke. Thoughts?
Old 10-09-2009 | 07:32 PM
  #282  
Rev. Nathan's Avatar
Newbie - Just Registered
 
Joined: Sep 2009
Posts: 2
Originally Posted by n3985
How did you show her how easy it is was to swap everything out if you couldn't get the headlight out

Remove two 10mm bolt on top, then remove one push tab, 10mm bolt, one Philips screws from beneath the front bumper directly under the fog lights. Pull back undertray, remove 10mm bolt holding fog light housing, remove fog light housing, then you'll see the last and hidden 10mm bolt holding the headlight from bottom.

The bulb you need is D2R, I personally recommend sticking to OEM bulbs for maximum brightness. You'll need to remove the igniter cap, held in by 3 screws, then will have access to the bulb.
Hey man thanks for the reply. My Mom got scared when I started talking about bolts and decided to go to Infinti!

But hold your laughter... they wanted $1000 to replace the headlight!!
They said the ballast was broken... yeah, bull****. So I'm going to end up doing it for her. But I can't find the "D2R" bulb your are talking about on an Nissan genuine parts websites. Can you point me to a link?
Old 10-10-2009 | 08:35 AM
  #283  
ericks_i30's Avatar
Junior Member
 
Joined: Oct 2009
Posts: 22
From: tiffin,ohio
have a 96 i30 auto. any suggestions on recipe for 300 whp ? so far have a stillen high flow intake , warpspeed y pipe thinking of changing to cattman though .
Old 10-19-2009 | 04:24 PM
  #284  
duanes7's Avatar
Junior Member
 
Joined: Jul 2005
Posts: 18
brown sludge in coolant

Not 100%, but this was indicative of blown headgaskets when it occurred in my Supra, twice. Another indication - typically when you turn the car off it should draw coolant from the overflow bottle as it cools, with a blown gasket it will push coolant out of the bottle and onto the ground.
Napa used to sell a kit that went onto the top of the radiator and tested for hyrocarbons in the coolant.
Old 11-08-2009 | 10:45 AM
  #285  
Metalhead8722's Avatar
Newbie - Just Registered
 
Joined: Oct 2009
Posts: 3
From: Export, PA
Hey just bought a 96 i30t was just wondering what my best bet would be on where to get an intake and complete ehaust less the manifolds thanks

P.S. I'm new to forums not to cars (infiniti tech) don't need how to's just where to get parts
Old 11-08-2009 | 04:27 PM
  #286  
pmohr's Avatar
No more Maximas...
iTrader: (26)
 
Joined: Jul 2005
Posts: 14,331
From: Oak Ridge, TN
Originally Posted by Metalhead8722
Hey just bought a 96 i30t was just wondering what my best bet would be on where to get an intake and complete ehaust less the manifolds thanks

P.S. I'm new to forums not to cars (infiniti tech) don't need how to's just where to get parts
If you want more sound, than any intake will work. If you want the best overall power, stick with the stock intake. For aftermarket, the PR CAI is your best bet.

As for an exhaust, you can get them anywhere. Which one to get, that's personal preference. If you've got the money, Cattman is the 'premier' exhaust system out there, really.
Old 11-09-2009 | 05:02 PM
  #287  
Metalhead8722's Avatar
Newbie - Just Registered
 
Joined: Oct 2009
Posts: 3
From: Export, PA
Thanks

sorry i should have been more clear by intake i meant intake tube unless you meant that the stock airbox will give me the best power?
Old 11-09-2009 | 05:42 PM
  #288  
pmohr's Avatar
No more Maximas...
iTrader: (26)
 
Joined: Jul 2005
Posts: 14,331
From: Oak Ridge, TN
Originally Posted by Metalhead8722
sorry i should have been more clear by intake i meant intake tube unless you meant that the stock airbox will give me the best power?
Best overall power, yes. The stock intake is pretty well designed.

Now if you want to talk about intake manifolds, the 00VI is king.
Old 11-14-2009 | 07:57 PM
  #289  
Metalhead8722's Avatar
Newbie - Just Registered
 
Joined: Oct 2009
Posts: 3
From: Export, PA
Thanks man i appreciate the advice i do perfer the bigger sound of an aftermarket intake so ill probably go that route where can i find that PR CAI you were talkin about?
Old 12-12-2009 | 07:34 PM
  #290  
mikroehl's Avatar
Member
 
Joined: Nov 2009
Posts: 32
Ok ive seach and pm'd but can't seem to find them so I am guessing that they are no longer sold. I am looking for the clear side marker reflectors.

Also looking for some side skirts i found some on carparts.com 70$ each is that about right?
thx
Old 01-02-2010 | 07:23 PM
  #291  
SASKID's Avatar
Newbie - Just Registered
 
Joined: Jan 2010
Posts: 10
From: Sierra Madre, California
I have a 2000 Infiniti I30. And I want to change out the muffler. Not the entire exhaust. And I have no clue as to where to start. For while under I saw the clamps but it also looked like it is welded. Will I have to hacksaw the entire muffler off to change it?
Old 01-03-2010 | 07:17 AM
  #292  
n3985's Avatar
大陆弟弟
iTrader: (36)
 
Joined: May 2004
Posts: 4,038
From: Edgewater, NJ
Originally Posted by SASKID
I have a 2000 Infiniti I30. And I want to change out the muffler. Not the entire exhaust. And I have no clue as to where to start. For while under I saw the clamps but it also looked like it is welded. Will I have to hacksaw the entire muffler off to change it?
There are two bolts holding the axle back muffler, the bolts are welded but nuts are removable. Any exhaust which fit the Maxima 00-03 will fit, however you will need to extend the exhaust tips to clear our bumpers. Or you can go custom and have a muffler shop chop off your current one and weld on a new one.
Old 01-03-2010 | 11:36 PM
  #293  
SASKID's Avatar
Newbie - Just Registered
 
Joined: Jan 2010
Posts: 10
From: Sierra Madre, California
Originally Posted by n3985
There are two bolts holding the axle back muffler, the bolts are welded but nuts are removable. Any exhaust which fit the Maxima 00-03 will fit, however you will need to extend the exhaust tips to clear our bumpers. Or you can go custom and have a muffler shop chop off your current one and weld on a new one.
thank you for the response! Will other parts for an 00-03 maxima work on my I30 too? I know not all but will some?
Old 01-04-2010 | 06:24 AM
  #294  
n3985's Avatar
大陆弟弟
iTrader: (36)
 
Joined: May 2004
Posts: 4,038
From: Edgewater, NJ
Engine, suspension, brakes, everything non-body and center console related will work.
Old 01-04-2010 | 11:25 PM
  #295  
SASKID's Avatar
Newbie - Just Registered
 
Joined: Jan 2010
Posts: 10
From: Sierra Madre, California
Originally Posted by n3985
Engine, suspension, brakes, everything non-body and center console related will work.
Alright thank you.
Old 01-08-2010 | 10:08 AM
  #296  
cecilcroberts's Avatar
Newbie - Just Registered
 
Joined: Jan 2010
Posts: 1
TCM for '00 I30t affecting Automatic Transmission

The 1st to 2nd shift and the 2nd to 3rd shift are the wrong on my '00 I30t. The shift is non-existence most times. The RPMs go to 4k to 5k and you can tell power output goes at about 3k. I have to force the shift, by letting off on the gas pedal. There's a TSB from NHTSA that refers to a Nissan order to replace the TCM. I bought my '00, 2 years old. I would have thought that Infiniti would have preformed their own TSB's, but I guess not. I am a handy dandy auto-mechanic who will searches the junk yards so as not to pay the dealer prices for parts. However, there are few '00 I30t's in the yards (none so far).
What is the rev. code/part # for the revised TCM? Is it a firmware update?
I also bought the eService Manual from Nissan, which has no procedure for firmware updates to either ECU or TCM. Does anybody got those instructions?
Where can we find the latest rev. codes for the firmware for both the ECU and TCM?
Will a solenoid cause this time of shifting probem?
I want to fix the problem and don't like going down bunny trails
Old 01-08-2010 | 04:23 PM
  #297  
chrys9989's Avatar
Newbie - Just Registered
 
Joined: Jun 2009
Posts: 14
From: Philly
Tonight I was driving home from work, I was on an off/on ramp doing about sixty, when my car just suddenly shut off. No power, no lights, nothing. I brought her to a stop, as I was standing on the side of the rode calling for help, the flashers suddenly came back on. Then I got back in the car and she started up fine. I turned the heat off. When I was safely home, i turned the heat on, the heated seats, and there wasn't an issue. Any thought of what it could be? I intend to have the battery and the alternator checked tomorrow morning. THANKS
Old 01-12-2010 | 11:05 PM
  #298  
SASKID's Avatar
Newbie - Just Registered
 
Joined: Jan 2010
Posts: 10
From: Sierra Madre, California
Quick spark plug replacement question:

I managed to replace the 3 spark plugs on the left bank. But on the right bank I can't seem to get the connectors off without feeling like I am going to break something. Any hints tips or tricks on changing the right bank spark plugs?
Old 01-14-2010 | 11:07 AM
  #299  
Infinite A33's Avatar
Junior Member
 
Joined: Sep 2008
Posts: 18
From: ATL, Ga
Hey guys hope everyone had a good new years.
question. is the write up for the fog light rewire for 02-03 max http://www.shiftice.com/fog_rewire.html, same for us i35ers?
Old 01-21-2010 | 10:10 AM
  #300  
mrgooch42's Avatar
Member
 
Joined: Jan 2010
Posts: 38
Greetings I am a new member.
Old 01-27-2010 | 07:26 PM
  #301  
Infinite A33's Avatar
Junior Member
 
Joined: Sep 2008
Posts: 18
From: ATL, Ga
hello new member!
Old 02-01-2010 | 10:09 PM
  #302  
nSP1RE's Avatar
Newbie - Just Registered
 
Joined: Jan 2010
Posts: 1
I need this part:

I do know what its called, can anyone help?

Also I need this:


The **** was broken and I need to get it replaced.

If you have any spares of these, please email me: 123aqw321@gmail.com

I will pay for shipping and handling.

Thanks in Advance,

nSP1RE.

PS: Model is 2000 Infiniti I30 A33.
Old 02-02-2010 | 06:46 AM
  #303  
2001i30's Avatar
Member
iTrader: (1)
 
Joined: Feb 2008
Posts: 197
From: NY
I am not sure of the specific name of the dash part but there are some on ebay once in a while, although I have never seen one with the opening lid for sale. My understanding is your part was only available on the 00 and therefore are pretty rare. There are a couple of sellers on ebay with the complete car for parts, maybe you can email them and ask if they have the dash part and th ****. For the latter you may have to buy the entire switch.
Old 02-07-2010 | 07:48 PM
  #304  
D I R T Y I 3 0's Avatar
Senior Member
 
Joined: Oct 2009
Posts: 1,410
From: Frederick, MD
Hey guys im kinda new here cause ive had the account for awhile but never used it. Anyways, i gotta problem for you guys to figure out. I have a 96 Infiniti I30 and this is the first time I am having trouble with the tranny. I live up in MD and yeah we just got hit by the blizzard in all so as a result my car was stuck, thus I was constantly changing from drive to reverse and drive etc. (automatic :/) for like half an hour. Later that day I noticed I was getting much pick up. So I punched it and realized that it was not downshifting and basically concluded that the car was stuck in fourth. So I decided to give it a break and left the car off. When i turned it back on the O/D off, Overdrive, icon was flashing at me like nuts, but the tranny was working its regular ways -weird- downshifting and all, well KINDA. Ive realized that it does downshift when I punch it but it doesnt do so when you give like 75 or 80% gas like automatic tranny cars should, you know what im sayin. SO, Im hopin someone here will give me a diagnosis. I will get it checked. But im also wondering if me taking it to 118 a couple times had to do with it (limiter), car smells like barbeque after i go that fast. doubt it though hehe. Reply ASAP please, it needs help...
Old 02-07-2010 | 07:51 PM
  #305  
D I R T Y I 3 0's Avatar
Senior Member
 
Joined: Oct 2009
Posts: 1,410
From: Frederick, MD
Sorry, meant WASNT getting much pickup.
Old 02-13-2010 | 01:20 PM
  #306  
B_Eaze's Avatar
Senior Member
iTrader: (3)
 
Joined: Apr 2006
Posts: 804
From: Cambridge, Mass
Originally Posted by D I R T Y I 3 0
Hey guys im kinda new here cause ive had the account for awhile but never used it. Anyways, i gotta problem for you guys to figure out. I have a 96 Infiniti I30 and this is the first time I am having trouble with the tranny. I live up in MD and yeah we just got hit by the blizzard in all so as a result my car was stuck, thus I was constantly changing from drive to reverse and drive etc. (automatic :/) for like half an hour. Later that day I noticed I was getting much pick up. So I punched it and realized that it was not downshifting and basically concluded that the car was stuck in fourth. So I decided to give it a break and left the car off. When i turned it back on the O/D off, Overdrive, icon was flashing at me like nuts, but the tranny was working its regular ways -weird- downshifting and all, well KINDA. Ive realized that it does downshift when I punch it but it doesnt do so when you give like 75 or 80% gas like automatic tranny cars should, you know what im sayin. SO, Im hopin someone here will give me a diagnosis. I will get it checked. But im also wondering if me taking it to 118 a couple times had to do with it (limiter), car smells like barbeque after i go that fast. doubt it though hehe. Reply ASAP please, it needs help...
Well if you need to diagnose your tranny go to the 4th gen section cuz it has way more traffic and any mechanical issue that we may have with our cars they definitely will have with theirs. The link below is to the tranny diagnosis

http://forums.maxima.org/1001794-post2.html


your next best bet is to find a member named pmohr... if he has free time (and your lucky) and you can get your car to him he could definitley help u figure things out.
Old 02-14-2010 | 08:00 AM
  #307  
JamesMcD's Avatar
Newbie - Just Registered
 
Joined: Feb 2010
Posts: 3
Hello,
I'm new to the i30/Maxima thing. I just purchased a '96 i30t black on tan w/ 5-speed and I'm liking it a lot.

My newbie question: Can anyone with access to production data on these cars tell me what percentage of i30ts were built with the 5-speed? I've read some articles which state that Infiniti expected only 3-5% of buyers to choose the 5-speed, but I thought someone might know some more specific information.

thanks,
James
Old 02-14-2010 | 09:08 AM
  #308  
B_Eaze's Avatar
Senior Member
iTrader: (3)
 
Joined: Apr 2006
Posts: 804
From: Cambridge, Mass
Originally Posted by JamesMcD
Hello,
I'm new to the i30/Maxima thing. I just purchased a '96 i30t black on tan w/ 5-speed and I'm liking it a lot.

My newbie question: Can anyone with access to production data on these cars tell me what percentage of i30ts were built with the 5-speed? I've read some articles which state that Infiniti expected only 3-5% of buyers to choose the 5-speed, but I thought someone might know some more specific information.

thanks,
James
They were rather common in the 4th gen I30s. Any reason why you wanna know or just curious?

http://forums.maxima.org/infiniti-i3...0-5-speed.html
http://forums.maxima.org/general-max...ed-96-i30.html
Old 02-14-2010 | 12:15 PM
  #309  
JamesMcD's Avatar
Newbie - Just Registered
 
Joined: Feb 2010
Posts: 3
Originally Posted by B_Eaze
They were rather common in the 4th gen I30s. Any reason why you wanna know or just curious?

http://forums.maxima.org/infiniti-i3...0-5-speed.html
http://forums.maxima.org/general-max...ed-96-i30.html
I was just curious.
Old 02-14-2010 | 04:52 PM
  #310  
JamesMcD's Avatar
Newbie - Just Registered
 
Joined: Feb 2010
Posts: 3
A couple more questions:

1) Has anyone purchased an aftermarket grille from rockauto or from this Ebay seller:

http://cgi.ebay.com/ebaymotors/ws/eB...category=33564

These are OE replacements and not genuine parts so I was wondering about the fit/finish.

2) My car has the (lame, in my opinion) gold package. The gold on my front grille seems to be wearing off, and it looks like maybe there is chrome finish underneath. Has anyone successfully removed the gold finish from a gold-package grille to reveal the chrome?

3) Does anyone know if the front seat upholstery pieces for the seat bottoms are symmetrical between the driver and passenger side? I realize the tops would not be because of the lumbar support lever but I thought the bottoms might be the same. This would make it easier for me to find a replacement bottom; my driver's side is ripped and is really bothersome to me because the rest of my interior is mint.

4) Is depoautolights the best place to get the Cefiro one piece headlamps?

Thanks,
James
Old 02-15-2010 | 10:17 AM
  #311  
marcin93's Avatar
Newbie - Just Registered
 
Joined: Feb 2010
Posts: 4
hey quick question, is there any possibility for adding a AUX port in the 04 infinity i35's????
Old 02-16-2010 | 05:40 PM
  #312  
Montego Murph's Avatar
Senior Member
iTrader: (1)
 
Joined: Feb 2010
Posts: 466
From: Central IL
Hello all, I'm the soon-to-be owner of a 2001 Infiniti i30, possibly as soon as this weekend.

After doing a little research about the car, I learned that there is a design flaw that results in failure of the ECM. Apparently when the IACV, Coil packs, motor mounts, and some other things fail, a short will cause the ECM to fail. (It was noted that the IACV was the most common.)

Is this still a problem in the 2001's, or was this limited to the earlier models? Has anyone taken precautions such as installing an inline fuse to protect the ECM?

Last edited by Montego Murph; 02-16-2010 at 08:56 PM.
Old 02-16-2010 | 07:40 PM
  #313  
B_Eaze's Avatar
Senior Member
iTrader: (3)
 
Joined: Apr 2006
Posts: 804
From: Cambridge, Mass
You should be able to but I'm not sure about the aux port for ur 04 I35, your best bet is to ask the same question in the maxima forum of the same year (fifth or sixth gen) or the electronics section


Also Murph for the ECM failure, you should check the 5th gen section. You'll get responses much quicker
Old 02-17-2010 | 05:28 AM
  #314  
mikroehl's Avatar
Member
 
Joined: Nov 2009
Posts: 32
If a g35 sedan spoiler can fit a 2000-2005 Maxima, does that mean it will fit our I35??
Old 02-19-2010 | 04:10 PM
  #315  
MadJoe11's Avatar
Newbie - Just Registered
 
Joined: Sep 2009
Posts: 2
From: Terry, MS
Hi guys, long time peruser, first time posting. Anyway, ive had a heck of a time getting a driver side rear abs sensor. I keep getting parts from online and junkyards that just do not fit. My 2002 I35 is the base model, and the connector is smaller than ones I have ordered fit. The last one I bought (and returned) were this one. I know that it says sport series, but I was just praying that it would work... well it didnt, the connector is not the same. This all stemmed from buying the car from a local used dealer and I just did not do a thorough enough job at inspecting it. The SES, ABS, Slip, and TCS OFF lights never came on when turning the key. I just never noticed. So when my MAF blew up a week later, my SES never lit up. Luckily, my iphone and this forum got me out of the middle of the street (thanks) after pulling the wire from the MAF to limp-home. So come to find out... someone got mischievous and cut the LEDs off the board in the dash. I radioshack replaced them and now I have a Christmas tree effect, all those pretty missing lights are lit up. Now to the TCS/ABS issue, I did not even have a freaking Left Rear ABS sensor. none, nada, nothing. So I need a new one. I have increased the money i have spent on this to over $110 and am about to just go to the official infiniti parts dealer and buy one of theirs. Has anyone else had such an issue getting this part? Can anyone point me to one cheaper than this?
Old 02-19-2010 | 05:36 PM
  #316  
std aja de's Avatar
Pixell
iTrader: (3)
 
Joined: Nov 2007
Posts: 232
From: Jakarta
hello,

anybody knows which one of the aftermarket catbacks will work with our car? 95-96's or 97-99's maxima? My car is 1997 l30.
Old 02-20-2010 | 05:45 AM
  #317  
B_Eaze's Avatar
Senior Member
iTrader: (3)
 
Joined: Apr 2006
Posts: 804
From: Cambridge, Mass
Originally Posted by std aja de
hello,

anybody knows which one of the aftermarket catbacks will work with our car? 95-96's or 97-99's maxima? My car is 1997 l30.
GReddy, Catmann, Apexi, Megan basically any that fit on the Maxima of your year. Do a google search and a search on the forum and you'll find some.
Old 02-23-2010 | 05:07 PM
  #318  
The Real Bauer's Avatar
Newbie - Just Registered
 
Joined: Feb 2010
Posts: 4
Hello,
I own a 2004 Infiniti I35 and would like confirmation that a Cefiro A32 grill will or will not fit.

Thank you in advance!
Old 02-23-2010 | 05:15 PM
  #319  
The Real Bauer's Avatar
Newbie - Just Registered
 
Joined: Feb 2010
Posts: 4
Originally Posted by The Real Bauer
Cefiro A32 grill!
or any other options available ?
Old 02-23-2010 | 07:00 PM
  #320  
JNCoRacer's Avatar
Just the tip.
iTrader: (6)
 
Joined: May 2003
Posts: 2,988
From: Plano, TX
No sir. Your 2004 I35 is an A33.


Quick Reply: NOOBIES: The "I AM NEW HERE BUT HAVE A QUESTION" thread...



All times are GMT -7. The time now is 04:06 PM.