Cattman 3" Catback Exhaust (New resonated version) - Order here!
#162
You can not easily buy me Nmex!and he would really **** kittens if he knew how much i paid for the nismo exhaust and matching down pipes for my 09
#164
I paid 2x as much for the FRONT only coilovers than what most pay for all 4 on a Maxima.
Lol, exactly... I could care less what your opinion is on what I could have done with my money. I choose to have fun with 11 year old car, and if I want to drop $1100 on a 3" exhaust, so what? Cant stand judgmental people, it's not your money, so who gives a ****? If there were a market for i35/maximas like Supras, Corvettes, etc, Im sure I wouldnt have spent as much on this exhaust as I did. But unfortunately, Im not going to get a Corvette or Supra at the price I got my I35 which is perfect for everything I need. Carseat and all. Sorry Im not you
No one here locally sells them, only the shtty one time use units.
Last edited by NmexMAX; 04-02-2013 at 10:47 AM.
#167
To FastNFuriousMax.....I doubt if there's a Corvette, Supra, Skyline, Ferrari custom exhaust that will increase the value of any of the cars mentioned.....Let alone the thousand of 1st Gen RX-7's, Datsun 510's, Z31's that have LS1's, VG30's, 2JZ's stuff in thier engine bay and again depreciating thier value as well even if it's Bluebook value is $1000.....Stock/Oem form is more valuable....That being said, If someone want's to install a $1000 4" catback on a 1981 Maxima 810 Turbo so the F**k what, it's thier car and thier money! Enjoy it while you can people!
#168
To FastNFuriousMax.....I doubt if there's a Corvette, Supra, Skyline, Ferrari custom exhaust that will increase the value of any of the cars mentioned.....Let alone the thousand of 1st Gen RX-7's, Datsun 510's, Z31's that have LS1's, VG30's, 2JZ's stuff in thier engine bay and again depreciating thier value as well even if it's Bluebook value is $1000.....Stock/Oem form is more valuable....That being said, If someone want's to install a $1000 4" catback on a 1981 Maxima 810 Turbo so the F**k what, it's thier car and thier money! Enjoy it while you can people!
I don't think anyone installs performance parts and expects the value of their car to go up. I only mention the value of the car to put things in perspective.
Sometimes people spend money in wasteful ways like on crack rocks. Moral of the story you ask? Don't Do Drugs.
Last edited by FastnFuriousMax; 04-02-2013 at 12:55 PM.
#169
Drove to Milwaukee, and got the correct part. The picture NmexMax showed was correct for what I needed, ran me 20.97 and a 2 hour round trip, but I got them. A part number provided to me was incorrect, so I have to go back and return those gaskets. Needless to say, the exhaust is installed, and I couldnt be happier. Guys at the shop were amazed how it fit, although the muffler was about 2 inches short of the bumper. They extended it and got it looking just right. Havent had a chance to rip it up, but it sounds really clean. No drone, but I will highway cruise it later today and see how that is. It's surprisingly quiet, and the guys at the shop were saying "it actually sounds good" since a couple Maxima guys have brought in ricers before to install fart cans. All in all, Im happy.
#170
Drove to Milwaukee, and got the correct part. The picture NmexMax showed was correct for what I needed, ran me 20.97 and a 2 hour round trip, but I got them. A part number provided to me was incorrect, so I have to go back and return those gaskets. Needless to say, the exhaust is installed, and I couldnt be happier. Guys at the shop were amazed how it fit, although the muffler was about 2 inches short of the bumper. They extended it and got it looking just right. Havent had a chance to rip it up, but it sounds really clean. No drone, but I will highway cruise it later today and see how that is. It's surprisingly quiet, and the guys at the shop were saying "it actually sounds good" since a couple Maxima guys have brought in ricers before to install fart cans. All in all, Im happy.
#172
Probably wont do headers until I upgrade brakes (6th gen up front) all around and suspension. If I can find a cheap used SAFC II, might go that route so I can do a before and after dyno comparison with headers, but we'll see!
Got the 3" exhaust because I've been wanting exhaust for quite sometime, and the group buy came around, and I had the money, so I got it. It was short because I drive an I35, and I35 bumpers are different than Maxima bumpers.
Got the 3" exhaust because I've been wanting exhaust for quite sometime, and the group buy came around, and I had the money, so I got it. It was short because I drive an I35, and I35 bumpers are different than Maxima bumpers.
Last edited by D Moolah; 04-02-2013 at 01:44 PM.
#177
Awesome, thanks rebel. When are you going to install yours?
EDIT: So 3 of these?
EDIT: So 3 of these?
Last edited by D Moolah; 04-04-2013 at 09:14 AM.
#180
Yes, autozone has some good hangers (isolators). One trick I used to stabs luxe my system and prevent moving was to double up on the isolators in a couple places. Cmax and I have some images somewhere, in one of the exhaust threads. I'll see if I can coral them and repost them later.
#181
They make poly hangers too i have a few around here somewhere extra pita to put on but extremly solid
http://www.perrinperformance.com/p/2152
Sent from T_Bittys Melon Farm
http://www.perrinperformance.com/p/2152
Sent from T_Bittys Melon Farm
Last edited by cjandura; 04-04-2013 at 02:08 PM.
#183
I actually have Nismo's on the rear Muffler and Kartboy Poly hangar @ the location just rear of the resonator...This thing doesn't move at all! I used (NAPA) Walkers on the 3rd and 4th Gen....
#185
I saw eBay had one or two the other day. I went with the walker ones for 5 bucks each off amazon, and wow are these things sturdy. Went out and replaced them just this morning and it really makes a difference in the way the exhaust is held up. Thoroughly pleased with these
#186
I saw eBay had one or two the other day. I went with the walker ones for 5 bucks each off amazon, and wow are these things sturdy. Went out and replaced them just this morning and it really makes a difference in the way the exhaust is held up. Thoroughly pleased with these
#188
I got these shipped overnight to me for 5.17 a piece for three. I wont complain lol. Amazon Prime is awesome. Ground shipping from Rock Auto is 9 bucks for just one insulator.
Last edited by D Moolah; 04-05-2013 at 10:59 AM.
#190
Can't complain with those prices. See, I have my son this weekend which is why I was in such a rush to get it installed on Tuesday, because I actually told customer I would be away from the office, etc, and had that whole day planned to install my new parts. Just waiting on Valve Body (which should be here today) so I can install new motor mounts and ES inserts, but probably wont get to it until Sunday or Monday
#191
#193
I like the 35460 better because they're longer and allow better clearance the old ones 10 yrs ago were identical too the NISMO(s)... and were completely solid units now they have cut outs etc....you may have to play with it till you find the proper length but the Nismo(s) are perfect and LIKE GOLD!!!! One poly hangar at the Bpipe location stiffens this **** up really nice! The weak Oems can't handle the heavier 3" catback too long.....
#194
Got a chance to install a New Resonated Version of Cattman's Infamous 3" Catback...and I must say Wow!!!!! Volume reduction is awesomely noticeable when compared a spankin brand new or broke in original 4" resonator sized 3" catback....
#196
I've only put a couple hundred miles on the exhaust but its toned down noticeably since first installing it. I couldn't be happier, while in 2000-2700 rpm a you get slight drone but it's not unbearable or worth even complaining about, considering a performance exhaust will be louder. Just have to put on the 35460 hanger today. Ill try and get an audio clip up soon
#197
I've only put a couple hundred miles on the exhaust but its toned down noticeably since first installing it. I couldn't be happier, while in 2000-2700 rpm a you get slight drone but it's not unbearable or worth even complaining about, considering a performance exhaust will be louder. Just have to put on the 35460 hanger today. Ill try and get an audio clip up soon
#198
Cattman did a wonderful job but BIGGER IS BETTER....I just got some of the material in for that 6" Hybrid Resonator Section...still waiting on a few more pieces and it's ON! I feel a boost in throttle response with that 1 piece tubular design that Magnaflow utilizes....
You definitely see some real improvement in another 1000 miles..You'll be idling not hearing a peep! I too Have Cattman headers and Hi flo Cat.....you would never know it hearing it purrrr!
I've only put a couple hundred miles on the exhaust but its toned down noticeably since first installing it. I couldn't be happier, while in 2000-2700 rpm a you get slight drone but it's not unbearable or worth even complaining about, considering a performance exhaust will be louder. Just have to put on the 35460 hanger today. Ill try and get an audio clip up soon
Last edited by NmexMAX; 04-08-2013 at 09:59 AM.
#199
This will be the next purchase on my list. It's good to here that the cattman header and exhaust combo makes a nice sound.
#200
Just got my ES motor mount inserts installed yesterday, and all I can say is WOW. Both of my motor mounts were broken, so having these in is literally night and day. I feel so connected to the car, and while the vibration is more noticeable, it feels like it should be that way. If you have inserts, you know what I'm talking about.
Also installed the 35460, and that exhaust is not going anywhere lol. Pulling into my office parking lot used to cause a slight knock, but not anymore. Overall just thoroughly pleased with all of these upgrades. Valve body next and I'll be done for awhile
Also installed the 35460, and that exhaust is not going anywhere lol. Pulling into my office parking lot used to cause a slight knock, but not anymore. Overall just thoroughly pleased with all of these upgrades. Valve body next and I'll be done for awhile
Last edited by D Moolah; 04-09-2013 at 10:44 AM.