5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

5th Gen "I AM NEW HERE BUT HAVE A QUESTION" thread

Old Jun 3, 2008 | 10:23 AM
  #6201  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Originally Posted by deevel79
My "service engine soon" light is on, and a friends just lent me his code reader. Where on the 02 maxima is the computer that i can plug this machine into?
Under the dash, driver side.
Originally Posted by johnsmithy82
4th gen with VQ35 ...

was going 130 mph for about 15 seconds until the car shut off ! ..130mph ...no power steering..

thought it was the tranny or clutch at first...but no..its the engine..its knockin VERY HARD

any thoughts?.. crankshaft bearings ? pistons?
That was stupid. Rod bearings, UOA time.
Old Jun 3, 2008 | 11:08 AM
  #6202  
foodmanry's Avatar
Da Roller Coaster!
iTrader: (15)
 
Joined: Jan 2002
Posts: 3,913
From: Los Angeles, CA
Originally Posted by nebojsa_o
I have kind of a strange question here. On my '02 SE, the leather steering wheel look great everywhere EXCEPT the top part of it. The top piece looks like it's worn out, doesn't have a smooth finish to it like the rest of the wheel, and it's obviously not as shiny/glossy as the rest of the wheel is. I used some hand cream just to see what would happen, and it makes it look great again, almost brand new like, but that doesn't last more than a few hours since the cream gets into the leather, and onto my hands.

Is there something I can use that would stay on there longer? I was thinking something like black shoe polish of some sort... :S I know I could get it looking perfect with that, but I don't know if it would stick to my hands every time I grabbed the wheel. Any input on this would be great, and if not, then I'll maybe start a new thread, and hope someone notices it.

Thanks guys!
Here you go...it may seem like a cheap a*s overlay, but it is actually quite nice. I just installed one on my steering wheel and was impressed with the results.

http://www.wheelskins.com/index.php
Old Jun 3, 2008 | 03:37 PM
  #6203  
VQP0WER's Avatar
Senior Member
 
Joined: May 2008
Posts: 1,767
From: Moore, OK
Originally Posted by deevel79
My "service engine soon" light is on, and a friends just lent me his code reader. Where on the 02 maxima is the computer that i can plug this machine into?
The port is under the dash/steering wheel area.
Old Jun 4, 2008 | 06:08 AM
  #6204  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Originally Posted by VQP0WER
The port is under the dash/steering wheel area.
Sorta like under the dash, driver side right?

Originally Posted by NmexMAX
Under the dash, driver side.
Old Jun 4, 2008 | 10:45 AM
  #6205  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
under the left side of the dash...where your left knee is




Old Jun 4, 2008 | 12:56 PM
  #6206  
Lethal's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Dec 2003
Posts: 272
From: Vancouver, WA
I have a quick stupid question. What color are the stock 2k2 SE calipers?? I never really noticed the color until today. I got new rims installed and the calipers are black and look freshly painted.

**update**
Yeah the guys at les schwab painted them black for me. I have no idea why, guess I'll have to give them a call and thank them as I was going to paint them black anyway.

Last edited by Lethal; Jun 4, 2008 at 04:18 PM.
Old Jun 4, 2008 | 07:23 PM
  #6207  
majesticmaxima's Avatar
Member
iTrader: (2)
 
Joined: Sep 2006
Posts: 273
From: norwich, ct
Originally Posted by Lethal
I have a quick stupid question. What color are the stock 2k2 SE calipers?? I never really noticed the color until today. I got new rims installed and the calipers are black and look freshly painted.

**update**
Yeah the guys at les schwab painted them black for me. I have no idea why, guess I'll have to give them a call and thank them as I was going to paint them black anyway.
mine are silver
Old Jun 4, 2008 | 09:31 PM
  #6208  
Scottwax's Avatar
That's Mr. Detail to you
iTrader: (8)
 
Joined: Nov 2007
Posts: 4,016
From: Arlington, TX
Mine are fleshtone.
Old Jun 4, 2008 | 10:28 PM
  #6209  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
mine are black with silver nissan.....





Old Jun 5, 2008 | 03:00 PM
  #6210  
VQP0WER's Avatar
Senior Member
 
Joined: May 2008
Posts: 1,767
From: Moore, OK
I don't have any.....
Old Jun 5, 2008 | 03:10 PM
  #6211  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Brakes?
Old Jun 5, 2008 | 08:23 PM
  #6212  
TakeIt2TheMAX's Avatar
Junior Member
 
Joined: Mar 2008
Posts: 29
From: Earth
I have been looking at racing seats lately, and was wondering if there are any seats that match/closely resemble the stock gray interior. All I have looked at is Corbeau and they really don't have what I'm looking for. I want something with good bolstering, sort of like an Evo style seat. I like Recaro's but i'm not up for spending 2k on seats alone. If someone has done this swap, I'd like to know which brand it was and how much $$$ they had to shell out for seats and brackets combined.
Old Jun 5, 2008 | 08:39 PM
  #6213  
AceofSpds's Avatar
wat
iTrader: (4)
 
Joined: Aug 2005
Posts: 2,480
From: Mobile, AL
Originally Posted by TakeIt2TheMAX
I have been looking at racing seats lately, and was wondering if there are any seats that match/closely resemble the stock gray interior. All I have looked at is Corbeau and they really don't have what I'm looking for. I want something with good bolstering, sort of like an Evo style seat. I like Recaro's but i'm not up for spending 2k on seats alone. If someone has done this swap, I'd like to know which brand it was and how much $$$ they had to shell out for seats and brackets combined.
Might want to look into getting some 350z seats. There is an old thread on it around here somewhere. Search around.
Old Jun 6, 2008 | 07:16 AM
  #6214  
User 12822's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 561
If i get the membership i get the maxima.org sticker right? or can i just buy the sticker without subscribing?
Old Jun 6, 2008 | 07:23 AM
  #6215  
AceofSpds's Avatar
wat
iTrader: (4)
 
Joined: Aug 2005
Posts: 2,480
From: Mobile, AL
Originally Posted by TeH BawNeY
If i get the membership i get the maxima.org sticker right? or can i just buy the sticker without subscribing?
no you dont get a sticker w/ membership
Old Jun 6, 2008 | 07:25 AM
  #6216  
User 12822's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 561
Originally Posted by chopstix2nrz
no you dont get a sticker w/ membership
so how exactly can i get the sticker?
Old Jun 6, 2008 | 07:30 AM
  #6217  
AceofSpds's Avatar
wat
iTrader: (4)
 
Joined: Aug 2005
Posts: 2,480
From: Mobile, AL
http://forums.maxima.org/showthread.php?t=384891
Old Jun 6, 2008 | 03:09 PM
  #6218  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
Originally Posted by chopstix2nrz
no you dont get a sticker w/ membership
the only thing we have now days is this

Old Jun 7, 2008 | 09:31 AM
  #6219  
blkAEmax82's Avatar
Glory Glory Man United
iTrader: (16)
 
Joined: Aug 2006
Posts: 1,988
From: Sacramento, CA
I smell coolant and found it all over my engine. Ive notice that its leaking from the top and bottom.

Thanks to the search I seen Soonerfan recommend Radiatorbarn.com . Now im stuck trying to figure out which one to get (it gives me 2 options) . Can anyone help thanks in advance.

http://www.radiatorbarn.com/search.php?product=radiator

Damn the Link doesn't direct you straight to the find.

Last edited by blkAEmax82; Jun 7, 2008 at 09:36 AM.
Old Jun 7, 2008 | 09:39 AM
  #6220  
jasonmax's Avatar
Senior Member
iTrader: (2)
 
Joined: Sep 2007
Posts: 1,646
From: Omaha, NE
Originally Posted by 01_Maxine
I smell coolant and found it all over my engine. Ive notice that its leaking from the top and bottom.

Thanks to the search I seen Soonerfan recommend Radiatorbarn.com . Now im stuck trying to figure out which one to get (it gives me 2 options) . Can anyone help thanks in advance.

http://www.radiatorbarn.com/search.php?product=radiator

Damn the Link doesn't direct you straight to the find.
first one is all metal, the second one has a plastic cap like the one on my 02 maxima witch will leak sooner or later.
Old Jun 7, 2008 | 09:40 AM
  #6221  
blkAEmax82's Avatar
Glory Glory Man United
iTrader: (16)
 
Joined: Aug 2006
Posts: 1,988
From: Sacramento, CA
Well it confused me cause the bottom one said its OE style.
Old Jun 7, 2008 | 11:21 AM
  #6222  
Dirtylicious's Avatar
Newbie - Just Registered
 
Joined: Sep 2003
Posts: 8
does anyone know if the center caps off the OEM 2003 rims will fit into the G35 17 inch 5 spoke (sport sedan) rims?

Thanks
Old Jun 7, 2008 | 03:59 PM
  #6223  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
Originally Posted by Dirtylicious
does anyone know if the center caps off the OEM 2003 rims will fit into the G35 17 inch 5 spoke (sport sedan) rims?

Thanks
yes
Old Jun 7, 2008 | 05:08 PM
  #6224  
yardiemax01's Avatar
Member
iTrader: (1)
 
Joined: Aug 2007
Posts: 106
From: NY----FL
I recently went to autozone to check out why my SES light was one. The scanner print out said that bank 1 was running both rich and lean. ( i recently changed my mass airflow meter, spark plugs, oil, tranny fluid flush, belts, and a faulty coil pack). I was wondering if I needed to change my O2 sensors in band one? If so,, exactly which ones go to bank one?
Old Jun 7, 2008 | 05:10 PM
  #6225  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
Originally Posted by yardiemax01
I recently went to autozone to check out why my SES light was one. The scanner print out said that bank 1 was running both rich and lean. ( i recently changed my mass airflow meter, spark plugs, oil, tranny fluid flush, belts, and a faulty coil pack). I was wondering if I needed to change my O2 sensors in band one? If so,, exactly which ones go to bank one?
http://forums.maxima.org/showthread.php?t=559038
Old Jun 9, 2008 | 08:00 PM
  #6226  
redrelyt12's Avatar
Member
iTrader: (1)
 
Joined: Mar 2008
Posts: 247
From: Colchester, CT
needles

i just installed reverse gauges on my 00 SE and when i tried them out, the needles on the speedometer and tachometer went up, but did not return to 0. can anyone help?
Old Jun 9, 2008 | 08:01 PM
  #6227  
User 12822's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 561
uh yesterday in the city my car started to overheat when i put the ac on...what does this mean?
Old Jun 9, 2008 | 08:13 PM
  #6228  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Originally Posted by TeH BawNeY
uh yesterday in the city my car started to overheat when i put the ac on...what does this mean?
Any SES lights? Could mean a number of things ranging from t-stat, dead fan(s), etc.
Old Jun 9, 2008 | 08:15 PM
  #6229  
User 12822's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 561
Originally Posted by NmexMAX
Any SES lights? Could mean a number of things ranging from t-stat, dead fan(s), etc.
fans are fine. i have on code for my cat.
Old Jun 9, 2008 | 08:16 PM
  #6230  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
So the fan turns on when you turn the AC on?
Old Jun 9, 2008 | 08:21 PM
  #6231  
redrelyt12's Avatar
Member
iTrader: (1)
 
Joined: Mar 2008
Posts: 247
From: Colchester, CT
i just installed reverse gauges on my 00 SE and when i tried them out, the needles on the speedometer and tachometer went up, but did not return to 0. can anyone help?

sorry for reposting
Old Jun 9, 2008 | 08:31 PM
  #6232  
User 12822's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 561
Originally Posted by NmexMAX
So the fan turns on when you turn the AC on?
hmm im not sure. the fans i know are fine because my friend and i had to blast the heat on level 4 to get some heat out of the engine bay. the ac was also fine when we were on the highway. it only became a problem when we hit the suburban and city driving.
Old Jun 9, 2008 | 08:32 PM
  #6233  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
http://forums.maxima.org/showpost.ph...80&postcount=3


i just installed reverse gauges on my 00 SE and when i tried them out, the needles on the speedometer and tachometer went up, but did not return to 0. can anyone help?
Old Jun 9, 2008 | 08:34 PM
  #6234  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Originally Posted by TeH BawNeY
hmm im not sure. the fans i know are fine because my friend and i had to blast the heat on level 4 to get some heat out of the engine bay. the ac was also fine when we were on the highway. it only became a problem when we hit the suburban and city driving.
I meant the actual cooling fans, not the fans that blow air into the cabin, but the fans located near the radiator under the hood.
Old Jun 9, 2008 | 08:35 PM
  #6235  
User 12822's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 561
Originally Posted by NmexMAX
I meant the actual cooling fans, not the fans that blow air into the cabin, but the fans located near the radiator under the hood.
yeah they seem to be in working order, i could hear them and they were loud at idle, i guess because the engine was so warm.
Old Jun 10, 2008 | 04:36 AM
  #6236  
vball_max's Avatar
Supporting Maxima.org Member
iTrader: (5)
 
Joined: Jul 2007
Posts: 1,799
From: North Shore, MA
Originally Posted by NmexMAX
Could mean a number of things ranging from t-stat, dead fan(s), etc.


Start with the easy things....

1. make sure both fans work.
2. flush coolant system and replace coolant/water
3. replace thermostat (may want to do this when flushing system, part not expensive)
4. replace radiator
Old Jun 10, 2008 | 08:11 AM
  #6237  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
i would replace the radiator before the thermostat...ive done both and the radiator is easier
Old Jun 10, 2008 | 08:26 AM
  #6238  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
But the t-stat is far cheaper.
Old Jun 10, 2008 | 08:28 AM
  #6239  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
Originally Posted by NmexMAX
But the t-stat is far cheaper.
my 00 was overheating....replaced the t-stat and it did nothing...replaced radiator and it fixed the problem...my 02 was overheating...did the radiator first and it fixed the problem....
Old Jun 10, 2008 | 08:31 AM
  #6240  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
was wrong with the rad that caused that problem? My 95 has yet to give me any cooling problems, nor my 03. Interesting.

Thread Tools
Search this Thread

All times are GMT -7. The time now is 03:13 AM.