Megan Exhaust Install
#41
I have a 3.5 L with Cattman headers, HFC and Megan OE-RS, and the drone is really bad from 2100-2400 rpm. Before the headers, it was great. Now, on long trips, I actually resort to either driving 68 mph (+get really good gas mileage) or ear plugs. ymmv
#42
I just ordered a megan muffler and magnaflow resonator . Hope the 27" long 6 " round resonator helps or I don't know what I'm gona do .
#44
HFC = high-flow cat
True, although I believe those are 2.25" tubing. Another option, and also my plan, is to find a 03-04 G35 sedan muffler and use that (I believe it has 2.5" tubing)
True, although I believe those are 2.25" tubing. Another option, and also my plan, is to find a 03-04 G35 sedan muffler and use that (I believe it has 2.5" tubing)
#45
I'm sure the Maxima 87-03 are all 2" exhaust tubing.....the G35 should be 2.25"..... but the OEM will bolt straight up to the Cattman and Megan Racing Bpipe and the G35 will need fab work both on the hangar support and the tubing......The OEM FTW....I ran this setup for yrs and love it......
#46
I'm sure the Maxima 87-03 are all 2" exhaust tubing.....the G35 should be 2.25"..... but the OEM will bolt straight up to the Cattman and Megan Racing Bpipe and the G35 will need fab work both on the hangar support and the tubing......The OEM FTW....I ran this setup for yrs and love it......
#47
My combo was Cattman Headers, WSP Metallic cat, 2.5" Cattman Bpipe with the OEM Muffler.....It was a throaty mustang like sound with all the gurgling, and burbling during acceleration and deceleration.....and quiet as hell during driving in town or on the Freeway....A Great combo!
#48
Nice vid....and for a exhaust install I think some pay because of the weather of there state I'm in Cali and didn't have no rusted bolts on my stock exhaust so install for me was smooth sailing.....
Thread
Thread Starter
Forum
Replies
Last Post
MaxLife17
8th Generation Maxima (2016-)
43
06-27-2019 01:37 PM
Justin Kroll
5th Generation Maxima (2000-2003)
7
09-02-2015 11:06 AM