Log In

View Full Version : All Motor

Pages : 1 2 [3] 4 5 6 7 8 9 10 11 12 13 14 15
  1. So I was browsing JWT's tech articles and came across something strange
  2. 3.5 shortblock + 3.0 heads
  3. VQ35 Swap, 95 ECU, retaining VIAS
  4. help idle
  5. thinking of 3.5in' my 4th gen
  6. 4th gen 5 speed conversion
  7. vq30de s13 swap....or build thread hahaha
  8. 4.5 Max tuning tips needed:Dyno proven maybe?
  9. Quickest 00VI question, PIC INSIDE!!!
  10. Stroker Question ...
  11. explination on back pressure and aftermarket exhaust vs stock exhaust
  12. Greddy E-Manage Ultimate - how to identify
  13. 5.5 gen timing curve
  14. Question about fidanza flywheel
  15. Full Swap 3.5 ECU wiring schematic
  16. Eliminate dry start, solutions inside....
  17. Not cranking, CEL not lighting, but works with OBD2 scanner plugged in.
  18. coolant line swap?
  19. Transmission Gurus Step In
  20. 00VI Gasket and vacuum lines
  21. interested in a engine swap
  22. VQ35DE cams in a DEK #'s? Been done?
  23. Few Questions about installing a Fuel Cell
  24. is this a good CAI?
  25. Best/Necessary Mods to MAKE the N/A Setup RESPONSIVE?
  26. 00vi High idle (1900 rpm) with TPS disconnected
  27. Boost-a-spark by KB? Anyone still running this?
  28. Do 350z Coils drop right in FWD valve covers?
  29. shooting for 285whp-300whp n/a
  30. Fidanza Flywheel Touchy in First Gear?
  31. Are 350z injectors the same as my 04 injectors?
  32. Emanage Ultimate on a 2002 5.5 Gen Review
  33. New VQ35 for sale in un-claimed freight
  34. Need to know the number of each cylinder on the VQ35
  35. 00VI, To do or not to do.
  36. Ignition timing (DEK)
  37. Need opinions on camming a DEK.
  38. cardana24's 3.5 swap
  39. Mass Air Flow problems
  40. how to up the ignition coil voltage.....
  41. Did a VQ30 -> VQ35 (2002) swap. Can I do 2008?
  42. 2002 Valve Cover on a 2008 engine?
  43. Some 00VI questions as I progress...
  44. 6spd Starter Question....
  45. Y pipe differences between VQ30 years
  46. busted cam sensor on3.5 swap help
  47. Need some info from you 3.5 guys
  48. need some wiring help
  49. Anyone have MAF voltage logs?
  50. Anyone do a VQ30-> VQ37 swap?
  51. quick question about technosquare....
  52. 3.5 swap problems
  53. Rev Up cam timing in a vq30
  54. VAFCII in and out setting... where???
  55. 5spd swap.. (just have a question or two)
  56. 3.5 oil cooler on 3.0?
  57. 3.5 Swap, Knock Sensor relocation
  58. Motor buying tips
  59. Glowing Header
  60. Fuel rail diff. between DE / DEK rail.
  61. Smoke coming out from the front valve cover breather.
  62. putting only the 3.5 block in 4th gen.
  63. Question about Apexi WS2
  64. Need a block and crank..
  65. Cattman headers
  66. Technosquare ECU question???
  67. N2MB WOT box
  68. Emanage ultimate DIY harness
  69. Dek swap problems
  70. 3.0 Timing noise, 3.5 engine.
  71. Injector Question
  72. Idle Issues w/ 4.5 gen
  73. 00vi swap this weekend. a few Q's
  74. OOVI. RPM SIGNAL & FUNCTION TEST
  75. Automatic transmission rebuild/overhaul
  76. 70mm TB on a 4th gen 00VI??
  77. would jumped timing cause no / intermittent spark?
  78. what components needed with a wideband
  79. 3.5 swap on 5sp vlsd
  80. 4th gen - from MEVI to DEK + 3.5 CAMS....problems.
  81. 4th gen tuning
  82. Wheres the good motor mounts??
  83. Need help w/really poor idle after Spacer install and TPS calibration!!
  84. Coil size between front and rear coils.
  85. 3.5 timing ring modified to 3.0 flywheel
  86. VQ35 swap; Verify cam timing.
  87. O2 sensors critical in a VQ35 swap?
  88. question for ppl with built motors
  89. Pathfinder TB idle
  90. Spray w/ JWT ECU????
  91. Made my tuning Decision ;) Utec :) couple ?ss
  92. 3.5 Heads on 3.0?
  93. 3.5 swap complete. getting MAP/BARO code
  94. EMU-96 to 2k3 swap-Possible?
  95. Fastest 4th gen VQ30DE all motor 1/4mile run
  96. TOB Spacer for a 6spd Swap
  97. Too many options, not a clue which is best
  98. Tune Question - Tuning gurus, step inside.
  99. Tune issue
  100. need help on 2001 motor swap!
  101. VQ35 carnage pics.. :)
  102. Fidanza Flywheel
  103. Russ's 00vi Swap
  104. North Jersey (00vi swap)
  105. P0Rt and Polish..HOW TO?
  106. 3.5 Swap Auto, Smooth Idle, no IACV
  107. 1st Fully Built 5.5Gen - NA
  108. VQ35DE + 6 Speed swap Questions.
  109. precautionary 3.5 thread
  110. Has anyone ran their AFR at 13.5:1 all across without pinging?
  111. RPM switch for 00vi
  112. Head Gasket Help VQ30
  113. VQ30 CPS VS. VQ35 CPS
  114. 00vi swap gone wrong!!! need serious help
  115. Stock 4th gen auto tranny+ mild bolt on 3.5 = ????????
  116. Anyone do any testing with the new plastic intake manifold?
  117. VQ35 Turbo swapped Spec is finished! :)
  118. Acronyms / Links vq35
  119. Help w/ DE-K swap
  120. MAP/BARO
  121. Yet another 3.5 Swap thread (4th gen chasis, 2008 vq35)
  122. How to identify VLSD transmission
  123. vq30 front and rear valve cover swapable??
  124. Final Questions Before Installing VAFC-II
  125. VQ35 swapped Spec..
  126. Will 350z heads work on a FWD VQ35?
  127. VQ30 with 3.5 heads, and VK45 pistons?
  128. 2008 VQ35 swap Camshaft Position Sensor Hole
  129. MAFterburner;who uses it?
  130. BBMAF and new MAF ECU reflash
  131. question about my newly-bought VQ35
  132. Injector question ?
  133. 00vi Tuning
  134. vq35 fuel pressure
  135. ran into problems installing oovi, gurus please help my noob arse
  136. VI Removal for 3.0s
  137. Full billet intake manifold..
  138. 3.9 liter (big bore), CNC head/cammed VQ build..
  139. Very confusing stalling problem for the minds of A.M....
  140. Pathfinder throttle body install write up
  141. Bbmaf & greddy eu settings
  142. Degree settings for HR cams
  143. An interesting article written by Steve Dinan
  144. Kevin's VQ35DE NA Build Epilogue..
  145. 95-96 JWT ECU question??
  146. Marc's vq35 build
  147. Flywheels: (A33B) Maxima vs. (Z33) 350Z
  148. clutch masters stage 4 + aluminum flywheel install pics
  149. Piggy-back programer
  150. Q45 TB vs Pathy TB
  151. VQ30DE/00VI/VAFC2 TPS problem.
  152. Myth about cars needing backpressure
  153. AFC question
  154. another vq swap...input appreciated.
  155. A33 DE-K Apexi AFC users
  156. Overhauling my engine, need some input
  157. tranny "re-built" TONS of pics 56k
  158. need help!!!
  159. Plans for ITBs
  160. REBUILDING??
  161. VQ35 / 350Z Heads / 350Z ECU Build
  162. SAFC help
  163. COIL Testing?!?!
  164. Crank all day but car would not start***
  165. Opinions on wrapping headers?
  166. Advice For Supercharged VQ30 Engine Upgrades
  167. Building a Time Attack VQ for Competition - in a B15
  168. VQ35HR cams swap
  169. What Camshaft to use?
  170. Low budget piggyback called the UAFC!
  171. 5spd A33 i30 question. ( i have the trans for swap, but some ??)
  172. Idle issues in VI00 swap in 95 maxima
  173. problems after 5 speed swap
  174. Obx underdrive pulley
  175. 1996 SE malfunctioning LSD???
  176. Bent the Valves in my VG...What Needs to Be Done?
  177. Clutchmasters stage 4 - who has one?
  178. Is this bolt/stud removeable?
  179. rod and main bearing selection
  180. Calculating VE for the VQ
  181. Battle of the 3.0s???
  182. Pathfinder cooling kit
  183. SAFC 2 Help Needed!!!weid issue with loss of RPM signal
  184. 6 speed swap timing ring
  185. Installing new pistons in an unmodified stock block
  186. ACL Calico Race Bearings or OEM Bearings? Headstuds & Main Bolts?
  187. Other 3.5 UTEC guys chime in
  188. New PB at cecil county dragway
  189. Transgo RE4F04A-HD2 Reprogramming Kit Install
  190. Is there a aftermarket TCU for us?
  191. 4/5th gen headers vs 6th gen headers?
  192. Lm-2:digital air/fuel raito meter
  193. Tuning Help, acceleration halts at 5k rpms?
  194. 5.5 gen stock ecu starts to close throttle at high rpms?
  195. Cheap Lightweight Racing Battery from a Battery Jump Box -->
  196. Somebody buy this motor! Built RWD VQ35 NEW
  197. possibly a new oovi idea (need input)
  198. CEL w/00VI
  199. DEK fuel rail on 3.5
  200. Help: UTEC
  201. auto to manual swap in a 5th gen
  202. Z350 heads on VQ30DE maxima ???
  203. 00VI swap EGR guide tube trouble.
  204. are the VG30E's easily swappable?
  205. I dropped in a DE-k and it WILL NOT start
  206. Need Ideas for EGR tubing
  207. VQ35DE Buildup questions
  208. installed a walboro burning fuses!
  209. 01 DEK motor swap cold start issue ?
  210. 00VI Measurement Request
  211. Are FWD and RWD VQ block to bellhousing bolt patterns the same?
  212. Crank wont turn
  213. UTEC wiring clarification
  214. Colder Spark Plugs for N/A?
  215. Another 3.5 swap thread
  216. vacuum solenoid switch for MEVI
  217. Difference between the 3.0 and 3.5 chains
  218. New J&S info link
  219. Solution for Hesitation problems for VAFC-2 users
  220. gap between intake manifold and egr guide tube
  221. A33 IACV idle issues
  222. Loss of using 3.0 cams in the VQ35 swap
  223. Does the DEK IACV bolt up to the PF TB?
  224. changing the shift point on 5spd auto 6th gen?
  225. My VAFC2 + LC-1 wideband Tuning
  226. Rev-up Oil pump and oil pressure ISSUES!!! HELP!!
  227. Resonance Tuning
  228. Does the Greddy EU read stock front O2 voltage?
  229. 6 speed in 4th gen VSS
  230. Finally!
  231. jim wolf ecu for auto??
  232. 3" crush bent exhaust on VQ30?
  233. Anyone willing to trade 3.5 manifolds?
  234. 4th gen auto FD swap?
  235. Gutting the 00VI: Whats inside the 00VI?
  236. Pathfinder TB coolant bypass
  237. VQ30DE-K Swap Question
  238. 00vi Swap - Fuel Rail questions
  239. P0172, P0175, possible tuning needed to fix?
  240. GI: Q45 throttle body and MAF flanges
  241. Axle comparo between 5 & 6 speed tranny's...
  242. SSV4 HELP PLEASE SOMEONE
  243. car stalls after 00vi install
  244. need some help/info
  245. 3.5 Swap Questions
  246. extending o2 sensor wires??
  247. manual to auto swap for 4th gen
  248. 35 swap...no spark
  249. Tilley Built motor.
  250. Rev up oil Pump installation?