- Successful MAF removal for MAP on the EU..... ANYONE?
- has anyone sc a 02 max
- MAXUS 2010: Attending?
- More boost at lower revs (supercharged)
- Odd results from AFPR install
- 4th Gen Charge Piping Question
- Exhuast Question
- Blower installed, looking for advice on related stuff
- Blitz BOV wont vent at idle
- 382whp/380wtq
- e-manage blue to gold ????
- Driving around Video clip
- Supercharging a 5th gen
- Turbo automatic solution for prolong life...
- v1 supercharger.
- Poll: Your favorite clutch
- eaton M62
- Raised rev limiter with EU?
- Supercharger BOV question
- Stillen Max's Scd: Upgraded Front mount
- Problems with a Lean Idle
- Very very Low Compression (mind boggling)
- Turbo Help...
- Lets talk exhaust
- supercharger charge pipe
- Wideband O2 Installation
- SAFC 2 Help Needed!!!weid issue with loss of RPM signal
- 4.5gen backyard turbo build
- Mid Mount Turbo
- 2000 maxima build from dek 5 speed turbo to 3.5 6 speed turbo
- Turbo Setup Pictures
- dynod the frontyard boostkit
- Surging/Hesitation at WOT
- Super charger pulley question.....
- increasing spark
- Need help...turbo kit installed
- Vortech FMU help
- Need a little guidance.
- Question regarding 370cc Injectors with only a cartech FMU for fuel management
- 3.0 no more........3.5 soon come
- Turbo drain gasket - options
- 3rd Gen Walbro Fuel Pump In 4th Gen
- SC setup Blitz BOV -how tight is yours set?
- What Plugs do you use?
- Z32 or A33 or A32 MAF?!?!
- Vq30 Boosted looking to spray
- turbo manifolds for 4th gen
- Rich out-of-boost after muffler delete
- Ignition timing
- What next....
- Injectors
- best and cheapes place for manual bent piping?
- turbo question
- Link to J&S info...
- supercharger
- New and Bigger intercooler (pics inside)
- Un-Built VQ35??? Boost??calling out those who have blown them
- SSIM vs. stock IM(no vias), 15+psi 3.5
- Oil drain back plate, and v2 tentioner bracket
- Which Swap Should I Do for Boost?
- Turbo piping diameter RMT.
- difference between Tensioner pulley bracket from stillen and factory
- FPR (AEM) + Vortech FMU + DEK Injectors for 11lbs SCing ????
- J&S Safeguard and Emanage
- SC install before putting motor in car?
- Z32 MAF wiring.. WTF
- Help me understand Z32 MAF + Larger injector
- for the trully experienced with generations of turbo units, I need help.
- SC with DEK injectors and no FMU
- does everyone upgrade to a 300zx maf?
- Vortech FMU
- CT26 mrII turbo in a 4th gen?
- vq30dek supercharged need help!!!
- Built turbo VQ35 in 4th Gen
- Fellow SCed Orgers...
- Oil lines q's
- What spark plug to use?
- Emanage Ultimate + knock sensor input
- Zinc oil additive with Every oil change?
- ? about Kinetix SSV on a turboed 3.5
- My knock sensing device!!
- Boost flutter, dosnt go away
- EMB questions
- What Causes Low/Restricted Boost ~4psi ?
- Problem running Turbo Maxima in hot weather???
- Wiring my Turbo Timer
- Boosted 5th Gen guys, Fuel Pump Question
- Fuel tank sump
- V1 SC questions
- Setup for the supercharger ?!?!
- The two Nismo FPR's 5th gen fuel rail
- What's the ideal turbo stoich?
- Boost control and Tial WG
- Holset turbo question
- 3 Very fast questions !?!??
- Put another SCed max out there also full 4th gen piping on a 5th gen
- SecondToNone's backyard rebuild ** lots of pics **
- Used emanage injector harness to open the MEVI, read on
- Anyone here ever used a southbend clutch?
- n00b question, where to buy this flange?
- My Turbo Build
- Symptoms of blown turbo
- I need help with a belt question.... ASAP
- Progress on a V1 install .........
- supercharged video
- ? about pcv valves and boost
- Compressed Air for boost
- Post pics of IC setups
- How to install oil cooler
- Kevlo RMT Turbo build -Works !!
- Supercharger pulley, who is selling one? I need a 3.25
- Emanage Tuning for Boost, help.... + how do I make GM pressure sensor work?
- problem in first gear under boost
- call pulls to the right under boost
- J30 metal pulley as the idler, plastic fenco on the tensioner
- Turbo fuel requirement
- S/C Install and Progress - DFOWNZ
- Turbo damage? (Pics inside)
- Finally boosted!!!!
- Mastercater7's 4.5 Gen RMT Build Thread
- In-Cabin Photos
- SUPERCHARGER HELP
- help findin head studs
- New Stillen Supercharger Setup
- Boosting to 8psi
- V2 whine when boosting
- Turbo Progress Halted
- Will this blower work?
- V2 Belt Tensioner Bracket - Help!
- fuel system on a 5.5 gen max
- ANOTHER 5.5 TURBO
- Need some info on this tubo
- Need answer asap.
- Aftermarket Radiators
- PFI Kit
- VAFCII Quick Question
- If you have Gizzmo boost controller
- Trouble with emanage
- Will a V1 SC blower work?
- Breaking in a Built Engine
- 99 cali V2 3.125 tuning
- Project A32.5-T
- Emanage Blue + Wideband Help
- Need Fuel Help - Turbo
- nice engine for the price?
- Nismo Low Temp Thermostat VQ35 can it work on 4th gen
- Quick Injector Q.
- SC kit parts help
- New Products: MAF Solutions for FI
- My Turbo 3rd Gen
- Greddy Ultimate cd?
- Info about 350zIM on 3.5, fuel rail and return conversion. (5.5gen)
- Injectors
- My first S/C kit
- Upgade on radiator fans for boost
- guage Q's
- Help installing Ultimate/hks ignition
- DO NOT DO BUSINESS WITH SER_ALTIMA until he handles his current transactions
- Base Map for Greddy EMU
- Streetzlegend goes to the darkside (3.5!)
- ??BELT SIZE???
- 4th gen turbo parts
- VQ30 oil burning?
- Boost virgin 5th gen questions
- My Cutout idea
- Boost Control on a Supercharger
- FI noob...many SC questions...help please...
- Clutch Decsion
- Fuel setup changes - Returnless to Return style on VQ35
- knocking
- Removing pulley from blower
- Sc'er's Vs TC'ers
- Walbro 255lph fuel pump competition?
- choosing the right cams for turbo
- Upgrading to 660cc from 370 what brand to look for?
- 3rd Gen VG30E(T) Oil pressure sensor thread size?
- Apexi safc or Gerddy e-manage blue
- Quaife ATB differentials for 95-01 5MT Maximas
- best turbo setup?
- Getting A Manifold Fab'd for me :)
- VG30ET: Crank pulley Problem.
- Superchager bov
- electronic boost controller?
- Has anyone looked into E85?
- knocking at 14psi even with meth injection
- Urgent: Need to order kow C/R piston for DEk...
- injector info
- **The wait is over! Official thread for 95-99 3” Cattman Catbacks**
- 5.5gen Turbo'd putting out 447whp is it possible?
- placment of MAF
- T3 Water cooler Kit
- J&S Safeguard Explained
- need help on clutch decision
- rough idle & black exhaust
- Turbo Specs Help!!
- What harness to get with Greddy ultimate?
- New turbo is on its way.
- VG33R Supercharger
- Streetzlegend Headgasket Replacement progress..
- Vid: Turbo 4th Gen vs. APR Stg 3 GTI
- 6th gen superchargeddd
- Rough Idle, Really Rough Acceleration and More. HELP!
- Crankcase breather filter
- bigger injectors or keep fmu??
- jdm Vq30det info
- fuel line hookup?
- Vids of mastercater's S/C VQ35
- Walbro 255 HP?
- sc pulley question
- mild perfromance turbo build. plans and questions.
- Shopping for 3" I/C pipping & T bolt clamp
- VQ35HR potential
- '00 vi or high stall converter?
- signs of a s/c going bad??
- another supercharged 95 max!!
- Important Tuning Questions
- some basic sc questions...
- Another Supercharged 4.5 Gen
- Twin Turbo update....
- Some Black Smoke
- Opinions on this turbo:
- Trying to get started, did alot of reading, need specific answers!
- idea for the stillen sc alternative
- tuning help
- Preparing The 4.5 Gen
- About that time of year.
- Auxillary fuel pump install
- Anyone with water cooled turbo?
- DET parts for VQ30DE boost build
- Gauge Pods
- My turbo build
- MAF Harness Pin Removal
- DEK build for boost
- clutch suggestion for sc maxima
- Greddy files for bankruptcy
- to buy or not to buy?
- FMIC and CAI now installed Pics inside (56k = NO NO)
- MEVI's, SC's, and Turbo's...oh my
- doing some research
- Bah, blower rebuild possibly in the future
- Emanage Ultimate assistance - larger injectors and MAF
- 3.5 s/c build thread....
- Good fuel pressure regulator?
- Who owns this turbo 4th gen?
- Quiet Blow Off Valve
- I need help on the easist way to turbo charge my max
- First pics of my setup
- diy eprom? 3rd genners?
- Need SC to Plate Bolts
- 3.5" SS pipes vs 3.5" aluminium pipes heat dissipation